Hot water from a Chinese diesel heater Bobilvans hot water kit | EP34

Hot water from a Chinese diesel heater Bobilvans hot water kit | EP34 | Ford Transit Campervan Build

Рет қаралды 149,569

3 жыл бұрын

This episode I install my Hot water heater from Bobilvans! Im incredibly impressed with its speed. The kit used the Hot area from my 5kw Chinese Diesel Heater via Heat exchanges on the diesel heaters hot air flow. I have gone for there 18 Litre tank are there largest 2.1kw "Bumper" kit. Final hot water for my self build campervan
EDIT: I highly recommended at the end of the Bobilvans hot water heater as an install to install DIY Solution to hot water in a van. Having subsequently used it now for a few weeks properly for my shower and hot water system I can continue say that it is absolutely brilliant and highly recommend it.
BOBILVANS Referral Link: for everything
- www.bobilvans.co.uk/product-p...
- www.bobilvans.co.uk/?ref=MPA5
BOBILVANS Discount Code:
- 5% off or “MPA5” only for air-hybrid
#Chinesedieselheater #Campervanhotwater #Mispronouncedadventures
www.bobilvans.co.uk/
Welcome to my Ford Transit Mk8 Van build series.
My name is Alex Frood, I'm a UK based Freelance Expedition Leader and Outdoor instructor. I am converting my 2018 Ford Transit Mk8 L3H3 into a full-time Camper.
These videos are not How-to videos but showing my process for my conversion. feel free to copy me but id always recommend doing your own research as well.
-----------
Gear up for adventure with these exclusive deals:
🔋 ROAMER BATTERIES! Elevate your journey - [Affiliate Link] roamer.com/?aff=16
🔥 AUTOTERM Discount Code: mispronounced5% - [Exclusive 5% off] planarheaters.co.uk/home
🚿 BOBILVANS Hot water ! - [Affiliate Link] www.bobilvans.co.uk/?ref=MPA5
☕️ Support the channel! Grab a coffee, beer, or diesel at: www.buymeacoffee.com/misprono...
🛒 Check out my curated Amazon Store for van build essentials: www.amazon.co.uk/shop/mispron...
Your purchases fuel the adventure. Thanks for being part of the journey! 🌟
Connect with the adventure on social media:
📧 Email: Alex@alexfrood.com
🌐 Expedition Photography Website: www.AlexFrood.com
📸 Instagram: / alexfrood
📘 Facebook: / alexfroodoutdoorinstru...
Stay in the loop and join the exploration! 🌍✨
Disclaimer: Some of these links are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you. Also as an Amazon Associate, I earn from qualifying purchases at no extra cost to you.⚠️
--------------------

Пікірлер: 392

@MispronouncedAdventures 5 ай бұрын

This is older video and I have reviewed newer version as well. Check the Channel BOBILVANS Referral Link: for everything - www.bobilvans.co.uk/product-page/new-bobil-air-hybrid?ref=MPA5 - www.bobilvans.co.uk/?ref=MPA5 BOBILVANS Discount Code: - 5% off or “MPA5” only for air-hybrid

@208Jules 3 жыл бұрын

Blown away by this idea, seems a good system. We’ll be looking into it 👍🏻

@MispronouncedAdventures 3 жыл бұрын

It’s brilliant. I’d happily recommend it!

@RogersRamblings Жыл бұрын

Yours is the first installation I've seen. It's confirmed my intention to buy when/if I get a new motor fitted out. Good work.

@MispronouncedAdventures Жыл бұрын

Glad it is of help, they do have a newer version now, but I’ve been very happy with my original kit which has been in for over two years now

@bathfun 3 жыл бұрын

Great idea and a easy to follow video. Thank you for taking the time to make the video

@MispronouncedAdventures 3 жыл бұрын

No problem at all, it’s a great bit of kit and having now had it installed for quite a few weeks it’s absolutely fantastic

@El-Tel63-Terry. 2 жыл бұрын

Fantastic insight Alex, I'm watching your content in a very odd order ! But wanted to say how much I'm enjoying it. 👍🏻

@MispronouncedAdventures 2 жыл бұрын

Thank you very much, I’m glad you are enjoying it. Watch in any order you like!

@rudivandoornegat2371 3 жыл бұрын

You're the first one with the Bobilvans water heater kit in a van. And you've made a good video. The rest of your built seems impressive, so I'll watch the rest of your videos over the coming days.

@MispronouncedAdventures 3 жыл бұрын

Thank you! It’s a great kit I’m very happy with it. Enjoy the rest of videos

@Accountant-tf4pu 3 жыл бұрын

That’s a game changer no dangerous fumes or hassle of moving water around 💯

@MispronouncedAdventures 3 жыл бұрын

It’s a great System. That’s one of the main reasons I went for it

@HardDiskSpeaker 3 жыл бұрын

Wow, this is very smart engineering it is!

@garrykennedy5653 2 жыл бұрын

Fabulous I hadn’t heard of of this system, thank you

@MispronouncedAdventures Жыл бұрын

Glad you enjoyed it! I’ve had it installed now for almost 2 years. Love it

@davidharper1872 3 жыл бұрын

Impressive install! Way above my skill level.

@MispronouncedAdventures 3 жыл бұрын

Thank you. The step by step isn’t too hard to do. I just had to build a bit of a elaborate frame and mount due to space restrictions

@markchurchward482 3 жыл бұрын

Looks like a great system mate, well sourced 😉👍

@MispronouncedAdventures 3 жыл бұрын

Very happy with it. For me it’s seems like a perfect solution for me, Even better is the incredible price of it

@petecoventry6858 3 жыл бұрын

I was just looking at one of these- thanks for the video :)

@MispronouncedAdventures 3 жыл бұрын

No problem at all. I’ve had mine in for quite a few weeks now, love it

@PhilipHollowaychannel 3 жыл бұрын

I was watching a video by someone else a couple of days ago that used this same water exchanger. Looks a good idea

@MispronouncedAdventures 3 жыл бұрын

I’m been super impressed with its efficiency

@sampep 3 жыл бұрын

Fancy setup!!

@MispronouncedAdventures 3 жыл бұрын

Thank you, it’s quite a simple kit, but due to it being build it yourself you can make it fit your own requirements and how do your own flair for the finish on it

@scopex2749 3 жыл бұрын

Nice unit thanks for sharing

@MispronouncedAdventures 3 жыл бұрын

No problem. It’s a great unit have it in for a few weeks now

@moobaz8675 Жыл бұрын

Cool set up nicely done. 👍

@MispronouncedAdventures Жыл бұрын

Thank you

@itsallfabrication 2 жыл бұрын

Great vid, thanks for sharing.

@MispronouncedAdventures 2 жыл бұрын

No problem

@feltham3793 2 жыл бұрын

Learned lots. Thanks

@MispronouncedAdventures 2 жыл бұрын

Glad you found it helpful, it’s a great kit and I’m still happy with it after a year

@brendanryan262 3 жыл бұрын

I have one of these and am well impressed with it. Your install is soooo much neater than mine! Bobil now have a diverter gizmo so you can divert the heat and just heat the van, stops the system water doing that boiling thing also.

@MispronouncedAdventures 3 жыл бұрын

Yeah I now have a divert ( the boiling was the main reason ) so I can send the hot air into the heat exchanger or not. I’m currently doing freelance work for Bobilvan so i get to see install as well.

@MamaKim. 3 жыл бұрын

@@MispronouncedAdventures That’s good to know. Where are you based?

@MispronouncedAdventures 3 жыл бұрын

In my van so anywhere really but at the moment near Bristol with the Bobilvans work

@Me-lf5oj 3 жыл бұрын

That's a brilliant idea recycling energy, heating the caravan and the water at the same time it's similar to the engine heat exchanger heating the water while you're driving 👍

@MispronouncedAdventures 3 жыл бұрын

Definitely I think it’s good use of equipment I already had. Really happy with it

@MispronouncedAdventures 3 жыл бұрын

Chinese diesel heaters are compatible for kerosene, but I particularly wanted to plum it into the vans main tank. so I only had to worry about one type of fuel.

@normahalliburton2908 3 жыл бұрын

I want thisss, love the orange as well x

@MispronouncedAdventures 3 жыл бұрын

Thanks. It’s. Great kits and I like using that orange paint

@isacferreira6804 3 жыл бұрын

Nice, i just discover this kit, and think about adding the 12v ressistance as backup, just as you did. nice.

@MispronouncedAdventures 3 жыл бұрын

It’s a great kit. I’m so impressed with it and became even more when efficient enough to run my recirculating shower system off. I haven’t set tested the 12 V water heater and I’ll makes a sure video about it when I do.

@matsf8268 2 жыл бұрын

Cool stuff

@MispronouncedAdventures 2 жыл бұрын

Thank you

@lawrencewatt6897 2 жыл бұрын

Great video

@MispronouncedAdventures 2 жыл бұрын

Thank you

@kevinerickson2595 6 ай бұрын

Awesome

@MispronouncedAdventures 6 ай бұрын

Cheers

@solomonthe9076 Жыл бұрын

I like it 😂

@MispronouncedAdventures Жыл бұрын

2 year later I still like it

@David_11111 3 жыл бұрын

yay hot water :)

@MispronouncedAdventures 3 жыл бұрын

Indeed! I’m enjoying having hot water. I should probably plum the sink in sometime soon so I can use it 🤣

@marianslovak856 7 ай бұрын

Much more efficient would be using the exhaust pipe ( which has 200-300°C ) to heat the water. Also metal to water will be a better heat conductor than air-to-metal-to-water, a lot of energy will be lost ;-) And it is free heat ( waste heat ) when you need to run the heater to heat your Van ;-)

@MispronouncedAdventures 7 ай бұрын

Whilst waste heat recovery would be an option. I generally don’t think it’s a good idea for this application. Waste recovery in this way it could be done using something like an EGR cooler, or even as simple as wrapping copper pipe around the exhaust. But those become systems become more complicated than most people consider. As you don’t want to be running water through an EGR cooler or pipe when the exhaust pipe is external. Any occasion it was below freezing and the heater isn’t on and you had water in it you run the risk of the freeze expansion, cracking and destroying the system you’re using the heat exchange. To do a system like that properly you’re going to want to coolant loop or Make your own hydronic loop which needs a pump, reservoir coolant and then a secondary heat exchanger inside the vehicle to exchange hot coolant back into hot water. The other thing I would consider with the Chinese diesel heaters, particularly is, they don’t particularly like restrictions on their exhausts, or you would need to tune it afterwards to get a decent burn as you would probably increase the back pressure by adding a some types of heat exchanger.

@David_11111 3 жыл бұрын

saw this Kit somewhere it does look like a game changer :) all interested in your Dump load LOL

@MispronouncedAdventures 3 жыл бұрын

Yeah I’m interested in how the dump load will turn out as well. Technical plan wise my Victron MPPT has a built in relay. Which can be activated under a number of conditions, from reaching certain System voltages or switching to Float mode, or a mix of other options can be used to trigger the relay to turn on the dump load heater. But since those criteria are system voltage based. The DC to DC Charger could also bring the system up to that voltage and fully charge the batteries and still tripping the relay on the solar charger which mean I could have the immersion heater/ dump load turn on during a long drive and have hot water when I arrive when there is Excess energy potentially coming from the Dc to dc charger

@xxbambamxx7261 Жыл бұрын

I know this is a old video, but when I saw this system, i started to think about laying small tubes under the floor, and you would've had floor heating all over the back, and you can even route them up the walls, so you will radiant heat from the floor and the sides, and then you could use the radiators if you needed hit air....

@MispronouncedAdventures Жыл бұрын

It’s heated floor is now a bobilvan kit they sell and I’ve seen it implemented a few time with this system. It’s uses a smaller heat exchanger normally,( although you can use the big one if you want ). To be a sort of combination floor and air heating.

@MispronouncedAdventures Жыл бұрын

@Albert hello! Do you mean legionnaires over salmonella In water? Anyway, it’s meant to be above 50° to start to kill off legionnaires and 60 it cannot survive altogether. I routinely, always heat my tank to 60° for showers. Both of the versions of this kit mention good hot water tank storage routines and planning is in regarding to this.

@simonc4810 Жыл бұрын

@@albert6220 I think legionella would struggle to reach a dangerous threshold on such a small tank due to the high rate of water replacement. In a domestic water cylinder, there’s always a risk that a high volume of water just stagnates in the tank, which makes an anti-legionella cycle (or just a higher temp setting) wise. I’m guessing legionella is one of those things that’s always present in tiny quantities and only causes illness at high concentration.

@tomerdmann2708 7 ай бұрын

I was thinking of the same idea. Unfortunately I could not find such a kit at bobil vans.

@MispronouncedAdventures 7 ай бұрын

Bobilvans makes a underfloor heating kit

@jamest.5001 Жыл бұрын

So it would be a good idea to put a tee or Y in the line if you want to use for heat and water,. To be most efficient! So 2x 8kw heaters should heat 30-40 gallons of water fairly well, like an hour +/-,' maybe less if using 3 of these units to capture the heat, have two feed the hot air from two radiator units into a Y and into another radiator, to catch the heat! Then pipe the water in series, possibly using a single pump! Awesome!!

@MispronouncedAdventures Жыл бұрын

I did make some changes later on. I have a diverter after the heater, so I can choose the air to go into the heat exchanger or just into the van.

@WanderbusAdventures 3 жыл бұрын

What a great install. Those little relays were a neat idea. Those orange panels are also lovely. How has this worked out for you longer term?

@MispronouncedAdventures 3 жыл бұрын

Long term it’s been great. Had its in a about 6 months now. Brilliant throughout the winter and spring for my showers

@loydhicks3413 Жыл бұрын

Ive been living the van life for about 2 years now in the United states I had a big old propane hester which was in my way more than it was of use considering I live in a 92 Chevy astro van I have a 20 gallon fresh water tank under the bed and a 5 kw maxpeedrod diesel heater I would live to try one of these hest exchangers

@daversj Жыл бұрын

Its a smart and compact way to make hot water without a huge and expensive electrical system. If there was a damper that diverted hot air to the water coils and exited the bottom of vehicle that would prevent heating the van in summer. When in air heat mode the water coils would be out of the loop. So install a “Y” duct after the heater before the water coils.

@MispronouncedAdventures Жыл бұрын

Some people do use a diverter to duct the hot air out of the vehicle after the water coils. However, I generally find that so much heat energy from the hot air has gone into the water that the remaining hot air coming out of the van is hardly warm. Particular in my set I haven’t found it an issue.

@afk1448 Жыл бұрын

One thing you’ll find if you let the water boil off in the rad, is that you’ll get limescale develop and reduce efficiency and eventually clog the rad and kill the pump

@MispronouncedAdventures Жыл бұрын

Almost all of the bobil van kits, now ship with a diverter. So no longer an issue with boiling off off.

@BarefootBeekeeper Жыл бұрын

I have just bought an exhaust gas recycler (aka heat exchanger) to use the exhaust from my diesel heater to heat water.

@MispronouncedAdventures Жыл бұрын

That option does work as well, different set ups will benefit in different ways. In the summer, I like having the bobil van system on the diesel heater air aspect, so the diesel heater doesn’t heat up the habitation area because the hot is being transferred into the hot water.

@unknown-ql1fk Жыл бұрын

I always wanted to try and knock the fins off the burner housing and tightly wrap with a 3/8 copper coil and pump water thru that

@MispronouncedAdventures Жыл бұрын

I don’t know how effective that would be due to contact area with the pipe on the shell. But I do know there are a few rarer versions of the diesel heater which have a water jacket inside.

@gerryr1893 3 жыл бұрын

I use the same type of heater that I have in my Range Rover which is a webasto thermo top c to heat swimming pool

@MispronouncedAdventures 3 жыл бұрын

I have seen those units they are pretty powerful! I’m interested in having a play with one of those in the future

@jerrysmith2064 3 жыл бұрын

Great video, thank you. Out of interest what sort of pump do you use for pumping hot water to taps/shower.?

@MispronouncedAdventures 3 жыл бұрын

Seaflo 33 series diaphragm pump are what I use. As I use the shower set at 42c and the max recommended temperatures for those pumps is 60c

@stevey500 3 жыл бұрын

This is pretty great. I wonder of the Propex propane heater outputs enough heat to do the same thing.

@MispronouncedAdventures 3 жыл бұрын

Don’t see why it shouldn’t work with a propex heater. Under the FAQ on Bobilvans website I think they’ve got that as a question is that it should work it’s just they don’t know anyone who’s tested it like that yet

@ianburit3705 Жыл бұрын

As you may know, Landrover fit from factory diesel water heaters as part of its quicker engine warm-up times on its frugal BMW diesel-powered Landrover Freelanders, mine sounds like a gas turbine firing up at the first start that I found assuring, to be honest - NO silencer fitted from the factory though.. Thanks for your videos, as my son has the Chinese air heater In his VW hightop camper van and loves it..

@MispronouncedAdventures Жыл бұрын

I do know :) I have actually got 2 second hand 5kw Webasto Thermo top V engine pre heater from scraped Discovery 3 & 4. One of which I retro fitted to my transit engine to do that exact job, particularly on the Arctic trips. I’ve got a few videos on how to get them working and retrofit them. Although I do think I would want to run a coolant loop and a plated heat exchanger through one of those heaters and not water directly. I’m glad your son has found my videos helpful

@ianburit3705 Жыл бұрын

@@MispronouncedAdventures A water fed heat exchanger may work out well considering the btu`s the heaters put out, hope it goes well.. love the Transit warming up boost unit too.

@johnniethepom7545 Жыл бұрын

Young Man, " The whater in Majorka , don't taste like what it oughta " ! Lorraine Chase .

@MispronouncedAdventures Жыл бұрын

I have no idea what you are saying!

@johnniethepom7545 Жыл бұрын

@@MispronouncedAdventures Your pronunciation is appalling even for an Englishman .

@MispronouncedAdventures Жыл бұрын

Not a Englandman, a Scot. Have have you seen channel name? I’m Scotish, grew up in the south and lived on the north east of England for 10 years. Pronunciation change all over the uk. You should hear how they say “Book” in the north

@PanaLumberjack 2 жыл бұрын

I may have missed it, did you put backflow preventers on the two lines that you ran to the gray tank? Low risk I am sure, but it would be terrible if you sucked gray water into your hot clean water. Great build and video. Thanks for taking the time to take us along for the ride.

@MispronouncedAdventures 2 жыл бұрын

I have a manual off on drain valve so back flow won’t be possible. But it is a good point. I wouldn’t want that to happen

@imaley 2 жыл бұрын

Hi Alex, great install and video as usual, with regards to the water heater reducing the normal room heater function even when it's reached temperature, is there no diverter valve that can be added to only flow the heated air through the water heater when required? Just read the comments below and see that there is, thanks

@MispronouncedAdventures 2 жыл бұрын

Yes at the point when I bought this, the diverter wasn’t used/stocked . but most kits now people buy The diverter bobilvans sell as well which i also I have subsequently installed

@1aview 3 жыл бұрын

Ul be using that heating element more in summer. With more solar available so not to heat the whole van for water. Great idea and nice set-up

@MispronouncedAdventures 3 жыл бұрын

Generally that’s the idea, it’s pretty inefficient and power use to actively turn on when I want hot water but I like the idea of setting up a passive automated water heating system with it. One which can just flick on automatically in the summer when there is a lot more when solar energy to spare or in the winter at least if I’m driving a fairway and the DC to DC charger finishes charging the batteries up

@marks-0-0 3 жыл бұрын

I agree I think slower passive water heating is a great idea. As you mentioned Alex people should be aware of the dangers of Legionella in a hot water system.

@MispronouncedAdventures 3 жыл бұрын

Indeed legionella would be a pretty bad thing and the reason I mentioned ramping up the heat once a week, which is directly from the information Bobilvans also provide regarding recent legionella! My other solution is the recirculating shower system also includes a UV filter as part of my system

@georgiebearpaws Жыл бұрын

I'll be looking into this setup to produce hot water. But something you said about not being able to hold your hand in front of the blower because it was too hot. Thats not the case with my 8Kw diesel heater, it's not that hot. My realize now, heater is on the outside of my workshop taken in outside cold air. Now I'm thinking about recirculating the already heated cabin air back into the intake to get most out of my heater.

@MispronouncedAdventures Жыл бұрын

Taking the warm air intake from the inside will help a lot.

@georgiebearpaws Жыл бұрын

@@MispronouncedAdventures I'll take your advise Thanks.

@bertbond1776 3 жыл бұрын

Hiya, I’m about to fit this system to my van and I’m intrigued by the immersion water heater element. Out of interest, what wattage are you using? 100w, 300w? Thanks. Build is a treat.

@MispronouncedAdventures 3 жыл бұрын

I added a 300w immersion heater. I’m yet to set that up but it’s going to be used as a “solar bump” a 300w heater should 25amp ish at 12v which is summer my solar panels will reduced easily, so once my main batteries are fully charged the solar would then start to heater element

@CANTON76A 3 жыл бұрын

Hi, thanks for posting the video. I wonder, wouldn't be more efficient to use the exhaust pipe from the diesel heater to heat the water?

@MispronouncedAdventures 3 жыл бұрын

The company which made the heat exchanger on their KZfaq channel also did some tests with reclaiming the heat from the exhaust pipe. I think it’s again worked but it’s becomes technically more difficult as you then need drill more holes in the van to get the hot water back inside and also have to considered the effects of water and dirt on the equipment being located externally

@MispronouncedAdventures 3 жыл бұрын

Just to add, there tests were done using the own product which is primarily designed to extract heat from the airflow. If you wanted a more efficient System for the exhaust you probably need a completely different design

@wildwingingit1283 2 жыл бұрын

Hi mate, Currently deciding on options for heating/hot water for our current build. Only issues/inconveniences with this setup i can see (please correct me if wrong) is 1 - having to heat the van in order to get hot water.. can imagine this being frustrating in the summer when you just want a shower. 2 - having to find somewhere to fit a second water tank. Apart from these, this seems a solid option as diesel heaters are an easy & cost effective install. thanks

@MispronouncedAdventures 2 жыл бұрын

Hey, your first point comes up a lot as a asked question. The thing is you don’t really heat up the van because that heat energy is been taken out of the hot air and put into the water instead. The remaining air is hardly hot at all. additionally it only takes around 15 minutes to heat a tank. And I found there is absolutely no effect on the vans overall cabin temperature. Another option which Bobil van is actually offered now is a diverter where you could have the heat exchanger and blow out the bottom of the van. Second point yes he will have to find a place for the hot water tank but it’s quite easy to fit it into your build if you’re planning in the early stages. Hope this has been helpful

@thomasbarlow4223 3 жыл бұрын

This is cool but I would much rather use an EGR cooler to extract the waste heat from the exhaust. Like you said by using the bobils kit yes you get hot water but also very little hot air for the cabin. I am planning on having a small water pump run continuously extracting waste heat from the diesel heater exhaust to keep my 140 liter interior aluminum tank hot. This will also serve as a small heat sink to help keep the RV from cooling down so fast after the heater shuts off. Bobils kit might work good for 10-20liters but I dont think I want to wait 3 hrs for it to heat 120 or so liters while I'm sitting there freezing. Super nice ride BTW. Cheers mate.

@MispronouncedAdventures 3 жыл бұрын

Which is fine for my planned use. EGR means I’ll have to drill more holes in the bottom of van to the the water in and out again and any water in the pipes would be susceptible to frost. As it’s only taken 15 minutes to heat a full tank of water, Lack of hot air in the cabin isn’t much of issue. In the summer I had a EGR when I’d have to be pumping hot air into the cabin. I think a EGR ( on a Diesel heater exhaust ) would work better in a fixed or static environment like a offgrade house, shed or garage. Over a moving one in a van

@selfbuiltcampervans 2 жыл бұрын

just got mine up n running have to say very impressed!Alex is it p2 in settings I change to have it switch on the pump at exactly the set 40⁰ and not as it is now 42⁰?

@MispronouncedAdventures 2 жыл бұрын

It’s definitely a great bit of kit very happy a year on. I’ll have to look at the settings on the controller it’s been awhile since I’ve played of the settings

@michelthibodeau8550 2 жыл бұрын

Great video sir. I think that this solution is a lot cheaper that the engine heat exchanger with Isotemp water tank. I will defenitly go for that brilliant solution. I have a concern regarding the printed adaptors... Is it printed with PLA or ABS ? I'm afraid it might melt with time and vibrations from the van ???

@MispronouncedAdventures 2 жыл бұрын

It’s a great solution for the price! As for the adapters, they are not printed with PLA or ABS but a different material. They stand up to the heat no issues

@AL6S00740 Жыл бұрын

I would suggest use an intercooler OR a exhaust heat exchanger to achieve higher temperature difference AND you will use wasted energy anyway .. since the exhaust is crazy hot some times up to 150C

@MispronouncedAdventures Жыл бұрын

I don’t like the idea of using the intercooler or exhaust heat exchanger. Then you would be you need to have the heater on max inside the van to in the summer to heat hot water and heat the van up. With the bobil kit the air hot it’s exchanged into hot water so does heat the van up. The other problem with a exhaust recovery system, if you wouldn’t want to run water for it. As if it was the winter and you didn’t have the tea heater turned on, it would be set for freezing and damaging the exchanger. You would want to build entire new glycol / coolant loop and then pipe that in out of the van and have a second heat exchanger to convert the coolant heat into water

@tazouk101 3 жыл бұрын

Belting videos. Where did you get the thermal relays, they dont come with the bobils do they?

@MispronouncedAdventures 3 жыл бұрын

Yeah. The thermal relays are part of the kit and instructions on how to properly wire them and set them up. ( or at least they were at the time of ordering them myself )

@alextop1850 2 жыл бұрын

Have you tested the heat flow make sure no toxic gases are given off in the hit air ? Because you never know.....

@MispronouncedAdventures 2 жыл бұрын

Personally it not something I’ve tested. However looking at Materials used on the cooling fins and paint I don’t have a worry . And at the same heat exchanges are often used indoors for easy water cooling, which are used throughout the world in indoor environments. Or are you referring to the hot air from the diesel heater itself?

@time4wanderlust 5 ай бұрын

hi Alex, what brand of chinese diesel heater do you have ? i also would want to connect the afterburner .. i thought you had a maxpeedingrods one so i ordered one.. but now i think it is not compatible with the afterburner 😮.. i do think it will work with the smart controller of bobilvans ? but i wonder if that unit can be controlled remotely like the afterburner... thank you for the great video's and ideas

@MispronouncedAdventures 5 ай бұрын

I have a older model maxpeedingrods unfortunately I think they have changed the ECU since i got mine I’d recommend the afterburner Facebook group they should be able to point you to eBay to buy a compatible ECU for less than £20. so you can just do an ecu swap

@paulshanesmith 2 жыл бұрын

Interesting video and good to see you highly rate your bobil heater. I've just ordered the 90mm bobil kit plus diverter and a Planar heater.. I plan to gravity fill the smaller hot water tank from the main cold tank simply using a switched normally closed solenoid and maybe a float switch so I can't overfill. I've not decided yet how I'll pump my heated water to the shower and sink, what do you recommend? A pump like yours or a submersible? I won't be using mixers, I'll just heat the water to my shower temp. I guess I'll have to have a separate cold water tap (and pump) if I wanted cold to the sink. It would never be to drink so I'm thinking I might even not bother with cold at the sink. What do you think?

@MispronouncedAdventures 2 жыл бұрын

I use the Seaflo 33 Series diaphragm pump ( probably a bit too powerful ) but they make smaller ones. As they were rated to a max water temp of 65c, I don’t think the submersion pumps had as high temperature rating

@casparv 3 жыл бұрын

It's a nice add on to prepare some hot water for a shower. But what to do when it's not cold outside so you don't really have to run the heater? You'll be wasting a lot of diesel heating some water for a shower in summer with the bobilvans dump valve. Though possiblity you could finetune the diesel heater fan speed as low as possible to maximize heat transfer. Word of warning: these computer heat exchangers will likely be soldered together using the regular old leaded solder, probably leaking some lead into the water. I wouldn't use the hot water for drinking/cooking in.

@MispronouncedAdventures 3 жыл бұрын

For my purpose of use in the for circulating shower system it’s been great. Running the heater for hot water isn’t really issue in the summer or as much as you might assume, so much heat energy from air has gone into the water the remaining hot air is hardly warm at all by the time it comes out a vent, additionally I can always be vented directly into the shower room was this extractor fan which is normally what I do when I’m having a shower anyway . As it would only be for 10-15 minutes to heat a hot tank that would be about 140ml of Diesel ( considering I normally using the heater on 5.4hz heater ) primarily I use it for my recirculating shower system. so normally a total of a 20-25 run time from starting heating to finishing a 10 minutes shower. So a little more heater run time with the runtime of the recirculating shower. So around 20-40p In fuel a nice long shower which is a satisfactory trade-off. I’d been interested to if slower fan speed equal higher energy transfer. Might need to have a play with that I never consider any of the hot water from the tank, fresh any longer, just for shower are use and maybe washing up

@casparv 3 жыл бұрын

@@MispronouncedAdventures Thanks for the long reply. A diesel use of 140ml does not sound too bad at all! Hardly noticeable on the overall fuel consumption and cheaper than the average campsite shower :) I'm amazed how efficient these radiators/heat exchangers seem to be! Getting the booster sounds like a smart move indeed. A later thought: recirculating the air back into the heater, instead of dumping it outside, might be an idea too. But it's probably not necessary. And I'm not sure if the heater would shutdown gracefully if the inlet temperature gets too high. My own van build is still some time (and €€€) away, I'm looking forward to experimenting with such things :)

@fakenick91 2 жыл бұрын

Hello Alex How do you refill the water tank, even with the recirculation of shower I assume you must get some water loss from the taps. Do you have it set up to auto refill?

@MispronouncedAdventures 2 жыл бұрын

To refill the hot tank I have a manual valve I turn on or off which fills the hot tank from the fresh tank.

@martinfreedman 2 жыл бұрын

Why not use your Webasto diesel engine heater to also heat the DHW as well as the engine? (And if you add a leisure battery switch to the dashboard fan, you can use that as an air heat source for your van too).

@MispronouncedAdventures 2 жыл бұрын

Absolutely possible! For me logistically laying out would be a bit more difficult. Would also need a plated heat exchanger for indirect energy transfer between the bobil van water loop and higher pressure and a lot hotter Engine coolant loop. Another small other reason is the engine preheater you don’t really have any fine control. they are just programmed to heat their coolant loop to 80° and then shut down. On top of that the engine preheaters are a lot more thirsty on diesel than the air style heaters . But it is a popular set up option in the minibus variant where there is an auxiliary heater and a coolant loop going back of the van to a air heater Matrix

@jonathansmythe6273 2 жыл бұрын

I like that. I was wondering whether the exhaust heat could also be harvested, but I guess sooting up would be a problem.

@MispronouncedAdventures 2 жыл бұрын

There are other systems that use exhaust gases as heating. But if you use exhaust gases it means the heater is on full and none of the internal heat energy being put into the water. Because this system uses the hot air from the heater it means in the summer if you turn the heater on the heat the water you don’t heat up the cabin that much

@CosmicSeeker69 2 жыл бұрын

look up David McLuckie - EGR coolers can get 500/700w from the exhaust. Reverse flow the water for most efficient heating

@jonathansmythe6273 2 жыл бұрын

@@CosmicSeeker69 thanks, I'll look it up. He's done loads of vlogs on the diesel heaters.

@CosmicSeeker69 2 жыл бұрын

@@jonathansmythe6273 personally I've got 2 x Jaguar 2.7 units which I'm bolting face to face to pre feed the heat exchanger I've designed... Fingers crossed 🤞

@mrmagoo4897 3 жыл бұрын

Any chance of a video tying this in with the Afterburner? :D. I was looking at going the same route and having a switch on the dash that i just flick while you're driving before shower time that turns on the afterburner and Bobilvan setup at the same time? Really loving all your videos!

@MispronouncedAdventures 3 жыл бұрын

I’m definitely gonna be doing a follow-up video. I’ve had the afterburner in for a couple months now and it’s absolutely brilliant. Definitely don’t see a reason why you couldn’t do that if you’ve got the afterburner model with GPIO pins

@MispronouncedAdventures 3 жыл бұрын

@cgiddings91 3 жыл бұрын

Great video, really helpful! We have just purchased our kit, we have a 105L fresh water tank and the 12L hot water tank. Have you used two separate pumps for each of your tanks? We hadn't actually thought about this until we started laying everything out today!

@MispronouncedAdventures 3 жыл бұрын

It’s a great kit. I have used a separate pump for each. It might be possible to use just one with a complicated array of valves but to just seems easier to use two

@cgiddings91 3 жыл бұрын

@@MispronouncedAdventures great thanks, we had thought about some sort of tap to divert from each tank before the pump but as you said, its probably just a complicated way to go about it!

@MispronouncedAdventures 3 жыл бұрын

That was exactly the idea I was thinking. Something a bit like a mixer valve but couldn’t figure it out.

@cgiddings91 3 жыл бұрын

@@MispronouncedAdventures I suppose wouldn't be a problem if you don't mind having just hot, or just cold water at any one time? Just not the most convenient! 2nd pump it is!

@philliplopez8745 3 жыл бұрын

I would bang one together out of old auto heater cores and other bits .

@jimnicoll6459 3 жыл бұрын

Does it only go to 40°c? I'd be worried about legionella at that temp.

@MispronouncedAdventures 3 жыл бұрын

Highest can set it to is 70c ( tanks maximum temperature ) . The manufacturer recommends the tank is regular brought up to 60 degree for that particular reason much like you would like you similar system. In my case The water is 90% used for the recirculating shower system. So when in use The whole volume of water is usually replaced every few days, the recirculating shower system also includes UV filter. Legionnaires would be something more to worry about if the system was brought up to 40° and kept there continually and stagnant. The hot water tank is heated for showers opposed to being left heating, and even whilst is heating the water are cycling through the heat exchanger visit which is in excess of 80°c

@897aa33 2 жыл бұрын

Interesting but what is advantage vs truma therme 2 that cost less and works under same principals ?

@MispronouncedAdventures 2 жыл бұрын

Speed and efficiency mainly. The therme2 is only a 5 litre capacity whilst the Bobilvans is 12 or 18L. ( or any tank on a custom install ) it’s would take a lot, lot longer. The energy transfer between hot air and the water in the Thermo is tiny compared to their Bobil van’s System. But the items are for different uses. The Thermo is sort of meant to be running in the background heating itself with hot air slowly or using electric. The Bobilvans System is more about wanting to heat the on purpose and quickly

@MrBofficial0913 Жыл бұрын

I have a promaster gas, is there way I can just buy a container to put a diesel to run this equipment?

@MispronouncedAdventures Жыл бұрын

Yes. There are lots of diesel heater kits with fuel tanks. But any type of air heater diesel, LPG gas or the petrol heater version should work as well.

@mreza84 Жыл бұрын

What if one uses exhaust gas to warm water? I think in that way you will get much more heat out of the system and your hot air will not lose its temperature.

@MispronouncedAdventures Жыл бұрын

Problem with using exhaust gases means you’ve got to run the heater on for inside the van which means you’re gonna heat up the van which isn’t ideal in the summer. With the bobil system, you’re converting that hot air in to hot water by the heat exchanger. The other issue with using exhaust gases is the heat exchanger would need to be mounted external. Which means you shouldn’t run water through it because during the winter if the heating was turned off, water could freeze in the heat exchanger and cracking it if it was outside so you would need to run a separate glyco / coolant loop and bring it back into the van. I think an exhaust gas system is more practical in a static domestic setting.

@MispronouncedAdventures Жыл бұрын

But I’m also not doubting that exhaust gas energy recovery is probably very effective. Using something like a EGR cooler

@joethomas7585 2 жыл бұрын

Thanks for the video. What's the temperature range the plastic tank can hold? I always thought it has a max of 45 degrees Celsius

@MispronouncedAdventures 2 жыл бұрын

The manufactures wydale plastics recommend max 70c. However this is for a unsupported tank as the plastic becomes more flexible at higher temperatures my tank is fully encased insulation and supported by a box. so you wouldn’t actually be able to melt the tank as such. Additionally these are foodgrade tanks so even at those higher temperatures from understanding the plastic does woudl not leech contaminants into the water

@joethomas7585 2 жыл бұрын

@@MispronouncedAdventures thank you. I appreciate the quick reply. I've been enjoying watching your videos this week 👍🏻

@loydhicks3413 Жыл бұрын

Would you please send me the link to wherr I can safely on line purchase one of these you and your videos have just earned you another devoted to every video subscriber I love how you shiw step by step ur installations and the way you present yourself in a professional manner thank you so much for sharing this video

@MispronouncedAdventures Жыл бұрын

www.bobilvans.co.uk is the website, but they do ship worldwide. Thank you watching that video and for enjoying my video style

@davidt3321 5 ай бұрын

How are you pumping the water from the shower bavk to the tank with it being higher ? Some kind of scavenge pump ?

@MispronouncedAdventures 5 ай бұрын

There is a shower drain pump

@paulrayner4514 Жыл бұрын

Have you thought about coiling copper pipe around the exhaust? All that wasted heat! Just a thought.

@MispronouncedAdventures Жыл бұрын

Things like that work great and EGR coolers as well but It’s not really practical to do in a van. As you would need to pipe it in and out of the van. Additionally any point in the winter, you didn’t have the heating on those pipes would be susceptible to freezing and damage. unless you run a completely separate glycol solution and system, but that’s really quite complicated. The other drawback would be in the summer. You would be heating the van at full power to get hot water whilst with the current system. The hot air from the diesel heater is converted into hot water.

@paulrayner4514 Жыл бұрын

@@MispronouncedAdventures thanks for the reply, I was just a thought. I'm a yorkshireman and just can't get all that wasted heat out of my head. I suppose if you used glycol or suchlike you would have to overcome boiling problems as well.

@josephshuler1874 Ай бұрын

Does it make your van hot? I've seen this, but I always worry about the heat. With on demand propane, it only runs when water is running

@MispronouncedAdventures Ай бұрын

A bit of a common misconception regarding the unit most of the heat energy is extracted from the hot air by the heat exchanger. The air is slightly warm at best and the system is so fast heating water. The system during summertime is running long although. some people do choose to vent it externally.

@lawrencerosier5734 5 ай бұрын

Will this Bobivan kit work with a Webasto gasoline heater?

@MispronouncedAdventures 5 ай бұрын

Yes, exchanges don’t mind where the hot air comes from so diesel heater, gasoline, heater, propane / LPG heater. You may experience different heat exchange rates with different fuel sources

@nickj409 Жыл бұрын

Does it mean in the summer if you want a hot shower, you also have to tolerate the hot air coming out of the heater at the same time?

@MispronouncedAdventures Жыл бұрын

Good question, this is assumed quite a lot, but what happens is the energy from the hot air is transferred into the water to make the hot water. So the remaining air to come out of the vent is lukewarm at best. The heater also needs to be on for such a short span of time that that doesn’t have any effect habitation area. However, I do know a few people have also run diverters to the vent that remaining air out of the vehicle

@nickj409 Жыл бұрын

@@MispronouncedAdventures thanks for explanation. It also means that any unused hot water in the tank, acts like a conventional radiator after you've had a shower

@daveuk4111 3 жыл бұрын

What about a hot summers day would it be wise to have your diesel heater on

@MispronouncedAdventures 3 жыл бұрын

I guess asked this one a lot but it’s not really an issue. a vast majority of the heat energy in the air has already gone to water by the time it’s finished, remaining air coming out the vents is pretty cool. And since primary use of the hot water heater and for me is for the recirculating shower I’ll be in the shower anyway or I can direct the heat directly into the shower room it has its own extractor fan as well. Plus it only takes 10 to 15 minutes to heat the entire hot water tank anyway.

@janner2121 3 жыл бұрын

Just ordered my kit with diverter plate for my new build going on here , will update when fitted and tested , impressive stuff , and have you used the immersion element yet with the Bobil kit to see how fast it heats the tank then ?

@MispronouncedAdventures 3 жыл бұрын

Great to hear! I’ve not used the immersion element just yet, wiring that up was on low on the list as it was winter at the time. But it will be getting on it

@janner2121 3 жыл бұрын

@@MispronouncedAdventures Aah Haa ! Be interesting to see how they perform together with heat up times, what amps does the element draw ?

@MispronouncedAdventures 3 жыл бұрын

@@janner2121 300w elements so it’s should be about 25amp. Which might seems like a lot but this idea was it going to be a passive heating option not an active one. Using it as solar dump, so when my battery are full, the energy can go into that. Using otherwise wasted power. On a sunny day it can be anywhere from 20-35amp coming in from solar. As for time taken . I think it was way over an hour to get to the temp I wanted. I would also have it on a temperature controlled relay so it only take the tank to a temp I want

@kamikazekunze 3 жыл бұрын

So where to you send the hot air when you don’t want cabin heat but you want hot water?

@MispronouncedAdventures 3 жыл бұрын

So much heat energy is taken out of hot air by the heat exchanger when heating the water, that the remaining air coming out of the cabin vent has no real meaningful impact on the cabin temperature. Additionally I can also divert it directly into the shower room by itself if I wished

@gixxerich 3 жыл бұрын

Just an idea on a proper budget. What if you got a metal tank and had the outlet of the heater directly underneath blowing up towards the bottom if the tank, then had a pump inside the tank, like those 12v showers you can get

@MispronouncedAdventures 3 жыл бұрын

Yeah we’re is not reason that wouldn’t but I can’t imagine it would be very fast.

@jonnyflanders1229 3 жыл бұрын

How will the hot water tank be fed with cold? Will it be pressurized with the main pump? Or will you add it when you flush out the recirculation system? Cheers, Jonny.

@MispronouncedAdventures 3 жыл бұрын

The hot water System is an unpressurised. Not sure what you mean by fed with cold reason wise. Water temperature/ shower temperature is set at hot tank, So a mixer valve isn’t used as such for temperature control. For the shower I set the tank to heat the water to 42c and I just use the hot on full. If you mean fed for cold for refilling purposes, I have a on / off valve I can open when pumps water into the hot tank from the Cold system to refill it. As for flushing the recirculating System. I turn the cold tap ( feed from the cold / fresh loop ) on full, open the drain valve at the bottom of the hot water tank and turn the recirculating system on. That runs fresh water thought all of the filters into the hot tank which then immediately drains out the hot tank into the grey tank under the van. Once finished I refill the hot tank with new water. If I don’t want to flush the filter and just the hot tank. I can open the drain valve in the bottem of the hot tank and the fill valve in the top Consider this system having two separate water loops, one for hot and cold, both using there own pumps.

@jonnyflanders1229 3 жыл бұрын

@@MispronouncedAdventures ah I see thanks for the explanation 👍. Love your approach to the conversion and logic behind all the systems.

@bennyhill5938 3 жыл бұрын

freaking amazing. are you the guys that made this?

@MispronouncedAdventures 3 жыл бұрын

Bobilvans are the company that came up with the idea and makes the kits. so not me, but I have been working for Bobilvans on the newest can build over the last two weeks

@helenamandleberg9841 3 жыл бұрын

Hi Alex. First of all, I’m absolutely loving your work. I’m at the very early stages of my build and have been procrastinating about heating/hot water solutions. I won’t be living full time in my van but do want some hot water for washing up/the occasional shower (outside). I think the diesel option might be a winner. A couple of questions: would you recommend the diverter that is an option on the Bobilvans kits? And is there any benefit to the remote option? Secondly, do you think it would be relative easy to connect up an outside shower head? Thanks and all the best as you continue with your build. The vids are brilliant 😊

@MispronouncedAdventures 3 жыл бұрын

Hey! Glad you are enjoying the videos and good luck with your build. 100% recommended Diverter, I have installed one myself ( probably a month or two after this video ) Bobilvans van is now stuck on sold inverters. Eliminates the annoying issue of water boiling in the heat exchanger when you haven’t got the hot water turned on. Should be relatively easy to connect it up to an outside shower you just need to plum that the showerhead into your hot water system

@helenamandleberg9841 3 жыл бұрын

@@MispronouncedAdventures thank you! Another quick question: is it the 75mm version you bought to use with the Chinese heater? About to order and want to make sure I get the right kit 👍🏼

@MispronouncedAdventures 3 жыл бұрын

Bobilvans sells a 75mm diverter. However I order a 60mm version and then 3 x 60mm to 75mm adapters as I couldn’t find a 75mm version. Then a few days later Bobilvans then started selling to the 75mm diverter.

@helenamandleberg9841 3 жыл бұрын

@@MispronouncedAdventures thank you again!

@liveuk Жыл бұрын

Ac and or a fridge from the heat exchanger too if you put more into it with a genny on it too. Total tiny solution

@MispronouncedAdventures Жыл бұрын

Not sure what you mean. Can you explain it a bit more to me?

@hunglikeadonkeybutnotassmelly 2 жыл бұрын

Would it be a good idea to use a UV lamp to keep the water sterile? as well as light up the tank to see the water level

@MispronouncedAdventures 2 жыл бұрын

I quite like this idea, definitely possible. Whilst I often keep the tank at 60° before use, which would eliminate and sterilise anything which could potentially be in there, it wouldn’t do it any harm to be continually sterilised

@hunglikeadonkeybutnotassmelly 2 жыл бұрын

@@MispronouncedAdventures I dont really know the science behind it but I have seen them use UV before. if it works it should be fit and forget.

@MispronouncedAdventures 2 жыл бұрын

@@hunglikeadonkeybutnotassmelly I actually use a UV steriliser in the reticulating shower part of this water system.

@rootin1234 3 жыл бұрын

Hello, Can you leave a link where you bought this? Thx

@MispronouncedAdventures 3 жыл бұрын

Sure I have added a link to the description of the video for you

@callanwatson5549 11 ай бұрын

What thread was the immersion heater?

@MispronouncedAdventures 11 ай бұрын

This one is 1 Inch BSP thread

@nectarcape 3 жыл бұрын

That 12V water heater element seems like a great way to convert excess solar to heated water.. But how effective and/or efficient is it? There also are tanks with integrated heat exchangers for air and integrated 12V/220V heating elements (such as Elgena Compact Luft). What I like about them is that they can be fitted in line with the exsisting cold water system to add an extra "10 liter hot loop" whereas Bobil system has to have its's own circulation and all the water volume is heated.

@MispronouncedAdventures 3 жыл бұрын

I’m yet to test 12v element. I can’t imagine at only 300w it’s going to be particularly effective but if the energy would be unused anyway I might as well put it somewhere. I’ve never heard of the Elgena unit before. Is the Elgena for Instant hot water . Seems it uses the hot area from the heater or a heater element In my van I went for the larger 18L Bobilvans System as it’s primarily used for my recirculating shower system as I need to the enough water volume to go all the way through the recirculating system and back into the hot tank before the hot tank empties it self.

@nectarcape 3 жыл бұрын

@@MispronouncedAdventures Here's a link: www.elgena.de/collections/boiler/products/nautic-compact-luft?variant=14790962755 It's basically same idea as the bobil but the tank is built around the heat exchanger. I have already a water system with 70 liter tank and a Shurflo pump to pressurise piping for a sink/shower... I think the Elgena unit can be pressurised to 2 or 3 bars so installing the tank in line with such system is possible. With Bobil I should have to install an additional pump and piping because the tank can't be pressurised. There are benefits of diy setup. For example if the 300W heater stops working you can change it easily...

@MispronouncedAdventures 3 жыл бұрын

Ah yes, now I understand you. Yes The Bobil System is unpressurise so needs a it’s own pump. So retrofitting the elgena would be simpler

@nectarcape 3 жыл бұрын

@@MispronouncedAdventures Do you have then only one water tank in your build? Meaning the one that Bobil heats?

@MispronouncedAdventures 3 жыл бұрын

I have a separate 70L fresh water tank which is my main water source. ( still in the process of editing the main plumbing video ) the 18L hot tank can be filled from the fresh tank with the turn of a tap.

@matthewsmith7319 2 жыл бұрын

What about the immersion heat was that part of the test and did it make a difference? What about power consumption? What about cost?

@MispronouncedAdventures 2 жыл бұрын

Immersion heater was so much better than Expected. There is a video on. It was for use the solar dump load to turn on when my batteries are full during this late spring to autumn months. Being 300w @ 12v it pulled 25amp. Which is a lot but the whole purpose of it is when the batteries are full so it’s just excessive solar energy power. I pretty much had 60° tank at the end of every day in the summer without having to use any additional power. Bobilvans even include this on the new version of the kit, Cost was about £25 I think

@matthewsmith7319 2 жыл бұрын

@@MispronouncedAdventures thanks for the information

@kokopelli314 Жыл бұрын

Wouldn't it be good to take waste heat from the exhaust?

@MispronouncedAdventures Жыл бұрын

People do do that . But it’s a lot more complicated. you could run a EGR cooler on the exhaust. But you would have to drill more holes in your vehicle to get the water in and out again and if you run water you could run into the problem of if the heater wasn’t turned on during the winter, it could freeze the water and damaging the EGR cooler. Additionally, in the summer, you would have to turn your heater on full to get hot water, and all of the hot air will go into the habitation, with this system, if the diesel heater is turned on for hot water, the hot air energy is getting exchanged into the water, so the remaining hot air doesn’t heat up the habitation.

@robertcooper9384 3 жыл бұрын

nice! thought about wraping the tank to keep the heat?

@MispronouncedAdventures 3 жыл бұрын

The tank is wrapped / heavily insulated surrounded by 25mm PIR insulation board

@MispronouncedAdventures 3 жыл бұрын

It’s been working pretty well insulated, still warm in the mornings after heating the tank the night before for a shower

@MrChasD Жыл бұрын

I am in the U.S.A. and am having difficulties in finding such kit. Could someone share with me a link for this. Much appreciated

@MispronouncedAdventures Жыл бұрын

Bobilvans website will help you out, send them an email. They ship world wide

@kenmackenzie7338 3 жыл бұрын

Hi can you give us an update on how well your hot water system is doing Alex. Hope you sorted all the water leaks. Looking forward to you next vlog.

@MispronouncedAdventures 3 жыл бұрын

Brilliant so far. 99% of the hot water use been for use In the recirculating shower that’s been pretty faultless, even though the overall build isn’t finished yet in December I did three weeks living in the van full time whilst away selling Christmas trees so using the hot water for long shower every night. Which it was perfect for. A change I did make however I have installed a vent diverter before heat exchanger. So when I’m not using the hot water system but I am using the Diesel heater I divert the hot air in the diverter act as a bypass. Mainly over a long period of time the water will start to boil in the heat exchanger ( it does say on their website it does this ) which can be an annoying noise and slowly heats the tank up. Bobilvan’s do sell the diverters on the website as well for this exact reason. Definitely over the moon with it for the price you pay and how effective it is!

@DanielSan-ch7dr 3 жыл бұрын

@@MispronouncedAdventures what's a recirculating shower this is the first video I've seen of yours and I find that quite interesting.

@MispronouncedAdventures 3 жыл бұрын

Check out episode 36. It will explains it. Basically it allows you to have unlimited length shower in the van. The shower grey water is filtered and sterilised and then immediated added back to the hot water tank before it runs out so the shower doesn’t run out of water whilst running

@srikengames Жыл бұрын

@@MispronouncedAdventures but doesn't this at some point result in the water of the shower becoming too hot?

@MispronouncedAdventures Жыл бұрын

@@srikengames nope, as the temperature relay turns the heat exchanger circulation pump off after when it reaches your target temperature

@steveprice1014 3 жыл бұрын

Hi, great video...where can I get one of these? How much do they cost. Steve

@MispronouncedAdventures 3 жыл бұрын

Link to the website which sells them in the description and the shop variety different mode and FAQ and more information on them . I use the largest “bumper” model

@petecoventry6858 3 жыл бұрын

4 minutes faster than the Carver I had - I am ordering this system and will get someone to fit it for me :)

@robdickson4071 3 жыл бұрын

Keep your eye on the radiators as they rust internally do the glass test on your hot water it may start to go orange

@MispronouncedAdventures 3 жыл бұрын

Which part would rust out of Curiosity? As I Presumed the internals would be copper? It’s not a major issue for me as this water I never considered for human consumption, washing dishes and shower water only, and the shower water is filtered through the filtration system so would clean any rust particles out. Long-term those radiators reasonably cheap so it’s not too difficult to replace them if need be

@robdickson4071 3 жыл бұрын

But its a Great idea will get one ordered

@robdickson4071 3 жыл бұрын

Check scan computers online menu, pc components, water cooling, radiators The rusting comes from different metals reacting with each other ie copper rad brass and streel fittings, internals of pump materials, its all to do with circulation and it charges the water not to put you off or anything just something to look for and didnt want to link scan as dont believe in companies taking business from us smaller ones also those computer radiators are meant to be used with de-ironised water for anti rust peoperties and doesnt leak and destroy components have a read on there site hope all this helps

@MispronouncedAdventures 3 жыл бұрын

Ah dissimilar metal corrosion / galvanic corrosion I understand now. I was thinking traditional rust as in Iron particles

@robdickson4071 3 жыл бұрын

It may be worth a removalbe mesh filter ( but adding more metals to the system lol ) it shows like microscopic filings but as are non ferrous so magnetic filtering wont help been a plumber /gas engoneer for 20 years along side many years of water cooled gaming hope all this helps and doesnt hinder

$@jfracionero$

@jfracionero 3 жыл бұрын

Hi. can you put the link to buy these accessories? thanks

@MispronouncedAdventures 3 жыл бұрын

Accessories as in the Bobilvans water heater? I’ve put a link in the video description. Hope that helps

@janemack1933 3 жыл бұрын

I’m a bit confused by the re-circulation aspect. I get that you can have a shower for as long as you want because the same water is going round and round - but doesn’t that means you’re trying to rinse yourself with soapy water?

@MispronouncedAdventures 3 жыл бұрын

Yes it is the same water going round and round as he said but it’s cleaned on that going around process. In the recirculation system there are 5 filters, pre pump mess filter ( 300 Micron ), 10 inch cartridge filters x 3 ( 20 micron sediment, 5 micron sediment & carbon ( removes a lot of the Soap amongst other chemicals ) and finishing with a UV sterilisation filter.

@janemack1933 3 жыл бұрын

@@MispronouncedAdventures Thank you - I have just found the video of you installing the re-circulating things so I will watch it! 😀

@MispronouncedAdventures 3 жыл бұрын

I do then normally replace the water ever few days

@selfbuiltcampervans 2 жыл бұрын

Alex if I just want to use 1 controller . I want to switch pump off when it reaches 40⁰. Will this work ,connect 12v + and neg , and connect pump pos and neg to the s2 and s2?

@MispronouncedAdventures 2 жыл бұрын

You could, but if you did it that way the pump would always be on trying to circulate the water because it was below your target temperature, but if the heater wasn’t turned on there would be no heat energy to heat up just continually circulating water. As for wiring. No you would need to put a 12 V feed into S1 and the positive from the pump into S to the negative from the pump just goes to your standard negative. The relay is effectively opening and closing a switch on the positive side of the pumps wiring to turn it on and off

@selfbuiltcampervans 2 жыл бұрын

@@MispronouncedAdventures wiring not my forte! thanks for the info

@selfbuiltcampervans 2 жыл бұрын

the 12v immersion ... how long does it take to heater 10 litres ? have u a link to it please?

@MispronouncedAdventures 2 жыл бұрын

About 2:30 to heat my 15L from 15c to 60c. The immersion heater is set up as a solar dump load for me so in the summer when the batteries is fully charged by about midday their hours and hours of free energy to heat the water. The element turns on As for a link is available on “Bimblesolar”

@selfbuiltcampervans 2 жыл бұрын

@@MispronouncedAdventures thanks. for a simple shower and heat water while I drive/ or with engine started connect immersion via controller to van/ starter battery , set controller to come shut off at certain temp . was going to use that controller. would this work ?

@MispronouncedAdventures 2 жыл бұрын

Yeah you could attach the 12v heating element and have it come on only when the van is running. So you were heating the water with spare power from the alternator.

@selfbuiltcampervans 2 жыл бұрын

@@MispronouncedAdventures thanks for reply how long would a 300w 12v immersion take to Heat 20 litres via alternator to showering temperature ?