I just built a motorized bike and I just wanted to say thanks for taking the time to make this video. My clutch works great out of the box, but after watching your video I understand how it works... Which will come in handy when I inevitably have a problem with it.
@wildbill23c8 жыл бұрын
Could you do a video on the clutch itself, serviceable components on the clutch, how often to expect to need to service the clutch, etc.
@damonstevenson2620 Жыл бұрын
Thank you! I just finished building my 1st bike and you answered my question just by going through a simple demonstration. Saving me a lot of research time. And in addition to that I wouldn't a lot more about how the clutch works and how it engages in disengages. Thank you so very much, your new subscriber.
@TheGearhead2224 жыл бұрын
GREAT video! I've owned my 49cc Grubbee Skyhawk GT-2B for over 10 years and NEVER fully understood this clutch design:)-John in Texas
@poochee20105 жыл бұрын
Thanks allen, great job, God Bless you!
@caitabbott10217 жыл бұрын
hey i like the fact that you are detailed with everything that you are saying about the bike im still having troublewith mine and would like to get help
@smokedkipper58 жыл бұрын
Well done, thanks so much, solved a couple of mysteries for me, you are a champion.
@katechapman86207 жыл бұрын
i really like how he explains everything in such great detail.great job and i apreciate your help alan
@sundial69192 жыл бұрын
Its like reading between the lines
@MFourtySeven3 жыл бұрын
I fixed my bent holding pin. Thank you for the video.
@JorgeRodriguez-ei2gi3 жыл бұрын
Thanks, we need more videos of motorized bikes, issues, upgrades & tips, thans, say hello, joe.
@seanstinnett14733 жыл бұрын
In the case of the clutch pins are hitting the inside of the outer case. Brand new engine. The cable arm is almost all the way to the adjustment on the case as well.
@stephenmichaelolney588010 ай бұрын
Very helpful Allen, thank you
@michaellipinski23117 жыл бұрын
I recently took the cover off where the driving sprocket is and noticed that when the clutch handle is pulled tight and the pin is pushed in the camshaft creates a lot of stress on the bolts holding the cover on (pushes the cover away from the engine). It actually stripped the longer bolt and inner threads closest to the clutch arm. Is this amount of stress from the camshaft on the cover normal? Is it possible that the camshaft was installed in the wrong position on the crank arm?
@presleyfleckmotorizedbikef42853 жыл бұрын
Thanks for info much needed for memory keeping
@johnbogacz37977 жыл бұрын
Great information I learn something new today.Thank you.
@aeronmalaluanartsstudio41793 жыл бұрын
Please make tutorial about bt80 clutch problem..thank you very much
@ralphruano7799 Жыл бұрын
I once took off the flower nut and when I tried to put it back on the clutch had too much pressure against my direction and wouldn’t let me screw it on how it was before. Then it was engaged all the time
@saved_yet_so_as_by_fire4 жыл бұрын
What happens if there's grease on the clutch pads?
@bernieolivera56326 жыл бұрын
Yes very helpful video. I have a new motor. My clutch isn't engaging when I pull on the lever or when I push the lever by hand. I'll have to disassemble the clutch to see if the spring is to tight. On a unrelated subject I noticed in the video that your chain guide is pulling down on the drive side of the chain instead of pushing up on the return side. What is that about? I've never seen that done and honestly it doesn't seem right. I guess there is a reason you do it, please explain. I'm always interested in what people think. It seems that you would want pure drive with no possible obstructions. But I guess it works for you.
@bikeberry6 жыл бұрын
You are completely right, the chain tensioner should be pushing up on the return side. This install was done in haste and without proper information. We are constancy trying to improve the quality and content of our videos. I'm not saying he was let go after this video, but he hasn't been part of our team since shortly after this video.
@NorwinViney3 ай бұрын
Does the bearing go in before the clutch shaft
@josephcrosby46223 жыл бұрын
This video helped me alot
@gotnitro4329 Жыл бұрын
On one of my bikes the clutch is super hard to pull in so you think loosening the collar on the spring will help make it easier to pull in?
@kennetik616 жыл бұрын
thanks,,,,allen u rock
@PisstNBrokeOffroad8 жыл бұрын
Why is every thing out of stock on your website like I was gonna buy it all at once but half the upgrades are out of stock
@PappaGahnj7 жыл бұрын
I found out the hard way that a Skyhawk has a different clutch shaft then the flying horse engine...Skyhawk has smaller keys, half moons...flying horse takes 2 flatkeys...Skyhawk shaft is also a bit longer...
@seanryan33595 жыл бұрын
Where did the ball bearing go? Thanks for your time
@caleb47904 жыл бұрын
Hello, nice video, I just have a bike kit built a few weeks and havnt used it much, the clutch already seems off only after a few hours usage, I can't immagon it would have any of these problems allready or could it be faulty clutch?
@Johnsmith-tw2bp8 жыл бұрын
Hi bike berry, in one of your previous videos talking about magneto contacts one of you guys mentioned weather sealing the chase. I was wondering if you could do a video on this ?
@garagerebuilds16048 жыл бұрын
very use full ty
@raymondshrader3555 Жыл бұрын
Is'nt there a little key that fits in there somewhere? I think so and if so you did'nt mention it.... Tks for the video but a little more in depth video would be appricated....
@urmomsahoe15 жыл бұрын
So when reassembling the threaded collar should be turned 10 times from the point it first threads on?
@an7d7y4 жыл бұрын
Very good information in this video thanks man!!
@geoffreygrear9372 жыл бұрын
Man my bike is a piece of... Just old. Well my chain locked up in the little clearance (im not educated on the parts) but the small sprocket on the motor part lmao! Anyway, the pin that engaged the clutch is not sticking out its about an 1/8 of and inch in! Do you think that bind could have damaged the clutch assembly?
@fudddudd16722 жыл бұрын
Good video thank you
@kofelee23583 жыл бұрын
Thank you ..
@robeetking79186 жыл бұрын
Solved my problem, Thanks
@stevenhyde77083 жыл бұрын
I put a new chain on and when I reassembled the couch pin wall the way in
@ravencruz75764 жыл бұрын
I was greasing the bucking bar, and all the ball bearings came out. Could you please help me on how to put th ball bearings back on place. thank you.
@hardathsingh4656 жыл бұрын
very good video sir
@mstzmikebsteviec11194 жыл бұрын
My bolt on the sprocket side but a little sprocket keeps loosening and it won't engage anything I have to keep tightening it not sure what to do
@jasons45867 жыл бұрын
helped a lot, thanks.
@schutztruppe8 жыл бұрын
so if I can force peal it and start the engine without using the clutch then the spring is too tight? I yes do I have to take it apart again or can I just adjust the flower nut? my bucking bar
@ernestopdyke50586 жыл бұрын
Helpful helping my friend with his he needs to replace the shaft n the cover. This video was a great help thanks so much
@olliefarber74577 жыл бұрын
What does wif mean he always says it
@mrthedudeman4 жыл бұрын
I want to replace my manual clutch with a centrifugal clutch. Would cut down on all wires. Do they have longer clutch shafts on the output end? I have really wide tires and need the sprocket to stick out further than stock. Does anyone have any safe solution to having the sprocket stick out a little further. I can't bring in rear sprocket and have it dish side out I should prob look into a flat rear sprocket instead of stock one.
@AmritpalBharaj8 жыл бұрын
are there clutch bearings? my engine makes a screeching sound and wont let wheel turn smoothly, its also like at one area of a full wheel rotation it tightens up and hard to turn the wheel by hand with less force
@mattsteva68788 жыл бұрын
I thalt this would help alsome engine and good luck
@codibaker88367 жыл бұрын
I need help, badly. I was riding yesterday, and when I was coming to a stop, I pulled in my clutch, heard a pop, and then I had no more clutch. I've been having to ride around without a clutch today, and I need to fix this asap.
@rjalex8 жыл бұрын
I am installing a flying horse 80cc. When i went to put the chain on, i took off the clutch plate. The inner shaft was stuck to the outer clutch. After a few taps with a hammer it broke free. Then, i notice that the push pin has no movement. even tapping it with a wood block and hammer, it will not move. Any suggestions. by the way, i bought it from you guys. Asking for help from your support staff also.....
@thomasthornton81923 жыл бұрын
My flower nut stripped on my way home any tips
@user-kn2kl6se8f Жыл бұрын
I' bought this motor and instructions are impossible, I opened the plate of the motor to attach the chain and a ball baron fell out .where does it go
@JS-fb6ww6 жыл бұрын
This video is pointless. Why show us how to adjust the clutch without showing us how to remove it?
@dianashairani94905 жыл бұрын
Beacause that's not the point of the video. Read the title of the video it doesn't say how to remove a clutch
@ericellquist70074 жыл бұрын
Great video, thanks for the info. What was the deal with the chain tensioner? I've never seen one like that before, with the adjustment at the top chain. Is this normal? What is the advantage if any?
@WyattBerry3 жыл бұрын
Yes, the tensioner caught my eye too and I'm curious as well.
@SnookTuned3 жыл бұрын
He explained it above. Apparently the dude that did that isn't with their team anymore.
@mattsteva68788 жыл бұрын
man I now there are machine that can make metal parts and pieces like clutch pin and bars and more hopefully you guys can come out with something high performance alot cheaper then a jack shaft so you can use your normal sprocket and shifter and simpler and easier to install so you can get more speed
@kenpottinger64792 жыл бұрын
Followed the how to remove preload spring but still won't come out
@HueMongussD3 жыл бұрын
Why would you use a hammer and screwdriver on the flower nut? All you have to do is pull in the camshaft arm and turn the flower nut in with your fingers. No tool is needed. I love when people do funny things, then make videos teaching others to do the same funny things.
@asphaltcowboy78682 жыл бұрын
I have a clutch that won't disengage..but I can't get the clutch shaft out to adjust it..
@sakenandersson73157 жыл бұрын
You are the BEST !"!"
@brandonkellogg95903 жыл бұрын
My clutch is a bit hard to disengage. It takes more force to pull the lever than it does with other bikes I've built. My cable isn't the problem, and the flower nut is set good. What can I do to lessen the force needed to disengage the clutch?
@caoimhin27 Жыл бұрын
maybe hit the gym so you can pull harder
@thebluecreeper25743 жыл бұрын
The main nut on the side of the buck bar keeps coming loose.
@matthewvanwamel58437 жыл бұрын
thanks
@evanferguson304 жыл бұрын
I need to know where the ball berring goes Bc it fell out of the clutch
@mioso54015 жыл бұрын
perfect Video
@dannyjeansonne83522 жыл бұрын
My clutch out of motor moves freely no tention on it
@SammyDone8 жыл бұрын
My bucking bar wont move. plz help. Already released flywheel, no change.
@brittanykobayashi38907 жыл бұрын
awesome
@kp46437 жыл бұрын
I need a new ball bearings. what size is it and where can I get 1
@stonefire7776 жыл бұрын
my kit I bought off ebay came and I notice clutch bar was going out instead of in. anyway I took apart as much as possible. adjusted clutch plate and put back together. now clutch bar goes in normally but, is very tight. checked clutch bar when in normal position and it is engaged. With clutch bar in it disengages. This is backwards I think. Anyway any advice of fixing this problem? Help! Anyone. Please very frustrated right now.
@bikeberry6 жыл бұрын
Give us a call at (800)317-0479 and our specialist will be happy to help you.
@flipdollar18 жыл бұрын
Do u know what can be wrong if every time I press the clutch it revs high
@mrmerhtin36258 жыл бұрын
THANK YOU!!!
@mrjones38695 жыл бұрын
You Are Great!
@LaCourierInCrysis5 жыл бұрын
Luv you guys , thanks
@cypionate2506 жыл бұрын
Thanks good info.
@alexbayne2898 жыл бұрын
When I go full speed on my bike it'll bog down and go slower, I don't know why. It also seems to be vibrating more than it did previously to this problem. This all surfaced after the motor was taken off of my bike and remounted.
@daniel296468 жыл бұрын
Air to fuel mix is too rich = too much gas+oil and no air, Remove carborator plastic cover
@mattsteva68788 жыл бұрын
but you have to understand the push pin is to short I got the push pin several time and everytime I order one it was to short when it was all assembled the push wasn't almost sticking out were the flower nut is on the pad a lot of times to short and kind of sunk in the flower nut like it to short so it make it real hard to make the clutch pad work right with out making the pad slip when drive it and and make the clutch handle to tight to pull so you guys really need to exception on the those pieces and the push pin to make sure it long enough before shipping it out ya that the only thing keep to completing my project
@Enriquecervantes287 жыл бұрын
did they have motorized kits for tricycles too?
@carlosdejesus82757 жыл бұрын
Enrique J Cervantes yes they do but a bit harder to find but they are out there mostly 4 stroke witch means no clutch.
@djlys81506 жыл бұрын
Ty
@bikeberry6 жыл бұрын
Entirely our pleasure.
@robeetking79186 жыл бұрын
I thought it solved my problem but when i pulled the clutch in it was real hard to pull in then i adjusted the flower nut and it helped a little but then when i was riding the chopper and tried to pull the clutch in it would not pull in and i used both hands and then it snap..so whats up PLEASE HELP ??
@bikeberry6 жыл бұрын
Contact our team at 1-800-317-0479 and we can work together to get your bike up and running.
@dougseibel7535 жыл бұрын
i can move my gear without pulling in the clutch what could be my problem as thr bike can be pedaled without the motor running or clutch engaged and thr chsin is tight and clutch cable run properly could someone please hekp
@bikeberry5 жыл бұрын
Give us a call at (800)317-0479 and one of our specialist will be happy to help
@kp46436 жыл бұрын
It there an easy way to adjust the collar
@williamlewis9993 жыл бұрын
If my clutch arm is in to far and it won't start up
@dennisskindzier87217 жыл бұрын
Fired up my 49cc for the 1st time today...was running fine...then the little gear on the clutch is just wore compleately off
@waqarjamil63653 жыл бұрын
So I i.tirws everything and my clutch won't engage thengine
@junycot69026 жыл бұрын
can you tell me? mine is always in engage it wont lock? is it maybe the clctch shaft is broken or?
@bikeberry6 жыл бұрын
Check that the clutch cable has proper tension and that the flower nut on the clutch plate is hand tight. If those suggestions do not help call our customer service representatives at 1-800-317-0479
@jlray5654 жыл бұрын
But where does the bearing go?
@HueMongussD3 жыл бұрын
Definitely no mechanical engineer. You put the chain tensioner in the absolute worst location of the drive-train. lol... Good luck with that... You should never put an idler pulley between the drive gear and the driven gear. That path should be unimpeded. You are putting a huge amount of stress on that idler pulley in that location. All slack should be taken up on the trailing path, where there will be practically no stress on the idler pulley.
@outsidegreaserecords7 жыл бұрын
good as vid
@markmann1176 жыл бұрын
clutch doesnt engauge or disengauge is it camshaft and berrings?
@bikeberry6 жыл бұрын
We'd love to help you. Contact our service team at 1-800-317-0479 and we can work together to get your bike up and running.
@stacywhite756 жыл бұрын
& the thigh bones connected to the. Hip bones.
@crazyredneck97094 жыл бұрын
Omg thank you!!!!!!!!!!!!!!!!!!!!!
@steveplotnersr85212 жыл бұрын
How to properly install a spark plug
@HighestRank5 жыл бұрын
The flowered nut was not displayed @ 0:21
@GadGetHackss8 жыл бұрын
Hey guys what's the best engine I can buy I want the best and fastest one from this company please someone reply? thanks
@kxlucifer7 жыл бұрын
GadgetHacks 4 stroke
@elmertoro89362 жыл бұрын
Lastima q no le entendi nada pero estuvo bueno
@PisstNBrokeOffroad8 жыл бұрын
My clutch is locked in gear plz help
@PisstNBrokeOffroad8 жыл бұрын
+lucajo16 I fixed it it was just the rotor was stuck
@dani-yk4dy8 жыл бұрын
bike berry i openend my 2 stroke engine uo and the piston was there and when i tried to reasembe it i cound not put the it back togther because of 2 black rings on the piston they broke what happens if i turn it on or somthing??? help pleasee!!?
@kxlucifer7 жыл бұрын
dani 945. once the rings broke might as well get new piston,piston rings and jug
@masterblaster34685 жыл бұрын
why cant i put the pin back all the way in..help?
@losojosdehotspanish21626 жыл бұрын
Where can I buy the push pin in the clutch actuator I think I lost it.
@bikeberry6 жыл бұрын
call us at (800)317-0479 for a special parts request.
@DataDiggerDon7 жыл бұрын
Great video...thanks for sharing your knowledge. #DataDiggerDon
@ToTheMaxGaming18 жыл бұрын
Could I use any of your engine kits on a BMX?
@PisstNBrokeOffroad8 жыл бұрын
Sadly no the frame is to small it would take heavy modification
@WillB-lv1xg6 жыл бұрын
Possibly one of their friction drive kits or electric hub kits.