How I Diagnose and Repair A Dead ATV Winch
Рет қаралды 24,939
3 жыл бұрынHaving an issue with your ATV winch? My winch recently quit on me, so in this video I'll cover a typical winch circuit and go through the basic steps you can try to figure out your issue. I'll review the switches and solenoids and related wiring usually found on a basic ATV winch set up, and cover the steps I use to problem solve.
This video is intended as entertainment, always check with a qualified technician or your dealer before attempting any of the procedures depicted on this channel.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Subscribe to my KZfaq Channel and CLICK THE BELL for videos to get notified when I post a video.
kzfaq.info?sub...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Acoustic/Folk Instrumental by Hyde - Free Instrumentals / davidhydemusic
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
Free Download / Stream: bit.ly/acoustic-folk-instrume...
Music promoted by Audio Library • Acoustic Folk Instrume...
------------------------------
🎵 Track Info:
Title: Acoustic Folk Instrumental by Hyde - Free Instrumentals
Genre and Mood: Country & Folk + Calm
---
🎧 Available on:
SoundCloud: bit.ly/SoundCloud-Acoustic
---
😊 Contact the Artist:
davidrhyde1@gmail.com
/ davidhydemusic
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Check me out on Facebook - myoldsled
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@MyOldSled 3 жыл бұрын
Stay tuned, I have had the sleds out! Getting colder, starting to see trails open up. Hopefully some riding content soon. In the meantime, I had to fix my ATV winch, so something to watch while we wait.
@navedemor5056 3 жыл бұрын
That's a good sign, we've had more trails open down here than you do up there which is weird
@MyOldSled 3 жыл бұрын
It's pretty common for where I am. Lake Huron and Georgian Bay seem to dump just to the south of where I am.
@waypastdone 2 жыл бұрын
As always clean, clear and concise. Thanks!
@MyOldSled 2 жыл бұрын
Hi Darcy, thanks for watching.
@delsnaturepics3581 Жыл бұрын
Thankyou,! the nuts and cables securing the hot leads to my winch looked perfect so I 'd never questioned them being the problem, a wire brush, a dab of dielectric grease, and I am back to plowing.
@fullthrottleornothrottle9183 3 жыл бұрын
Great video Dave keep up the great work!
@MyOldSled 3 жыл бұрын
Thanks for watching FTONT...and thank you for taking the time to comment. Really appreciate it.
@scottleppard288 Жыл бұрын
I'm thankful for your video. One click with pushing the winch switch and nothing happens. Checking connections and solenoid in the morning, thanks from New Hampshire!
@MyOldSled Жыл бұрын
Good luck!
@farmark457 3 жыл бұрын
On my gator snow plow the winch cable was getting wrapped up too twisted so I let a few ft out and lubed the cable and also added a pulley to increase the pull. Worked great after and doesn’t dim the lights so bad when plowing at night. Although the last couple of yrs it’s not getting used much in Southern Ontario. Good video
@MyOldSled 3 жыл бұрын
I think I’m going to replace this winch and switch, but hopefully it gets me through winter
@jacksoncornish4051 3 жыл бұрын
Great video Dave
@MyOldSled 3 жыл бұрын
Thanks Jackson. Glad you enjoyed it.
@stevehobson1887 Жыл бұрын
Just put a winch on my Xmark mower in IL, with a switch to operate a snow blade. All worked great in garage. Worked well for 2 ydriveways, then appears to have started to bind up when I lifted it, would not go back down, as I may have gotten a chain link into the winding. Also I may remove 10-20 feet of cable from the winch so there is more clearance on the drum. will try to determine the problem when it gets a little warmer (was -10F) the last few days 12-2022. and will be in 50's next week! thanks for the video!
@MyOldSled Жыл бұрын
Yeah unspool it, lubricate it, spool it carefully, then try the things i checked in this video, good luck. Merry Christmas!
@josephfjellgren8456 5 ай бұрын
awesome video, will trouble shoot my winch now, had 20 cm snow this night
@rogersmith7860 5 ай бұрын
Thank you for video I think it is my winch one coming in mail did everything u mentioned in video so winch I think lol
@HeidiNJames 3 жыл бұрын
Welcome back David. And the 360s at the beginning, You party animal, you bad boy You're a crazy son of a gun lmao
@MyOldSled 3 жыл бұрын
Hey HnJ! Getting any riding in?
@HeidiNJames 3 жыл бұрын
@@MyOldSled We personally haven't due to lack of snow, but others have been out. Soon I hope, thanks for asking.
@bwj3456 3 жыл бұрын
Terminals on my winch got loose, would work intermittently. Cleaned and tightness them up, it's all good now.
@MyOldSled 3 жыл бұрын
Good stuff. Beats replacing the winch
@upnorthvlogs 2 жыл бұрын
I just put my plow on the wheeler and put new carbides on sled I’m hoping for some snow this year Minnesota
@MyOldSled 2 жыл бұрын
Good luck
@upnorthvlogs 2 жыл бұрын
@@MyOldSled same to you let’s do snow dance this year
@avid1959 Жыл бұрын
Concise and to the point. Question. If you went straight to the winch with the volt meter and got the correct volts, would that essentially negate all of the previous steps?
@MyOldSled Жыл бұрын
Yes. In the video I am just going through the whole circuit.
@eugenethorne5656 2 жыл бұрын
Hello great video i have a question the bluee strap you have on your rack to run your cable through where did you get that? thanks for the video
@MyOldSled 2 жыл бұрын
Hi Eugene. Princess Auto…if you’re in the US, harbour freight maybe?
@raymondburelle3425 3 жыл бұрын
Trails finally opened up in my neck of the woods last Tuesday already got about 400km laid down this year
@MyOldSled 3 жыл бұрын
It looks like its starting to turn around a bit. I got out and played a bit to run out the cobwebs.
@CountryBoy6969 Жыл бұрын
Great video, I believe I have the same issue, I hear the clicking from the relay and it worked before my four wheeler got stuck in a creek and the winch got submerged under water. I'm going to try to redo the connections and see if that works. Anybody have any tips for me?
@johnfoster602 2 жыл бұрын
The lights on the instrument panel were flickering and engine stalling when I'd slow down or stop to raise the blade. Then I went to do an oil change and the blade wouldn't go up or down. I tested the port to the solenoid whish was good. I checked the wires from the solenoid to the winch but had nothing. I ordered another solenoid and installed it. It's working fine now. I haven't been able to check about the flickering lights on the instrument panel or the stalling yet. I hope it's all good.
@MyOldSled 2 жыл бұрын
Sounds like a loose or corroded connection. Start checking wiring….good luck
@viktor7495 3 жыл бұрын
Can you do a quad riding video ?? Missing the content
@LITTLEROCKSHORES 3 жыл бұрын
Did you put some kind of corrosion inhibitor on those terminals after cleaning them? If not, you will get to do this activity again soon.
@MyOldSled 3 жыл бұрын
Hi Littlerock. Lithium grease. Thanks for watching!
@strafto04 Жыл бұрын
This is exactly what I was looking for but you cruised through some of the steps of using the multimeter and I’m still somewhat lost. Oh well.
@MyOldSled Жыл бұрын
I’ll be doing a video on how to use a multimeter, this one is problem solving a winch.
@ArmedOutdoors 8 ай бұрын
Is there a video where you installed the winch? I have the same atv but no good place to install a winch
@MyOldSled 8 ай бұрын
No sorry but it’s pretty simple a plate mounts to the frame. Msg me on Facebook and I can shoot you some pics when I get time
@truenorthmuskoka9077 3 жыл бұрын
My winch cable was all twisted up and frayed from the previous owner. Not knowing the age of the winch I ended up replacing the entire winch with a new one that was on sale. Im curious about your setup. You have a pulley on yours. Mine is simply attached to the blade directly from the winch. I suspect your way has less force on the winch. You should do a video on that.
@MyOldSled 3 жыл бұрын
There you go: kzfaq.info/get/bejne/bquWgNGJ09POYKc.html
@truenorthmuskoka9077 3 жыл бұрын
Thx Dave. Did you end up drilling that hole to move the pulley further out. Did that work out better.
@MyOldSled 3 жыл бұрын
No. Sometimes you just turn around and its next year already.
@wilrukakoski3441 3 жыл бұрын
I’m not getting spark on my 1985 cougar 500 Is it possible to clean my coil?
@MyOldSled 3 жыл бұрын
I don’t know, but I would guess no. Its basically a transformer. When they go, its going be the windings inside are shot or shorting etc. Have a look, see if theres anything to can clean but other than connectors, I guess no. Are you sure its the coil? Have you tried unplugging your main harness to rule out a bad ground? Checked the stator etc..
@maxyo54 2 жыл бұрын
have the same issue with my winch, just bought a new solenoid, the body is plastic, the old one is metal that the ground is hooked to, how do I ground it using the new solenoid?
@MyOldSled 2 жыл бұрын
I would check with the manufacturer. Ive seen some that have a ground wire, but i wouldn’t want to steer you wrong
@maxyo54 2 жыл бұрын
@@MyOldSled thank you!!
@glenking3337 7 ай бұрын
When a winch is disconected from all wiring, should there be continuity between the two poles?
@MyOldSled 7 ай бұрын
Yes
@glenking3337 7 ай бұрын
@@MyOldSled thank you
@MyOldSled 7 ай бұрын
Mmm actually wait I think I misread. There would be continuity through each winding but not just if you put your leads on the pos/neg lead. Google testing a motor you’ll find lots of info.
@jedidiah5131 4 ай бұрын
I have power to my winch, I can hear it running when the out and in switch are used but the drum isn't turning and I can engage the free spool but I cant pull out any cable...Does anyone have any ideas before I pull it apart..I bought it used and didn't use it for a few months but it was working when plowing for the last few snowfalls..
@MyOldSled 4 ай бұрын
Im guessing one of the gears in the gear train grenaded.
@coreysullivan7401 Жыл бұрын
Hi I gave my father in law aa Bost I fried my batter and now my winch won't work I have nothing no clicking when I hit the switch. I know it's not the winch it's self because I tested it with power to the winch and it worked fine. Any idea what's going on?
@MyOldSled Жыл бұрын
Everything about problem solving is in the video.
@allendorf82 2 жыл бұрын
Just put a winch on my polaris an the solenoid just clicked I put power to the winch directly an it powered it both ways so I bought a new relay an it still just clicks currently looking for my volt meter lol
@MyOldSled 2 жыл бұрын
Then i would guess it must be the wiring between the solenoid and the winch.
@brandoexplorations9202 3 жыл бұрын
Hi could you do a video on how to diagnose a sled that dosent stop running after key and tether have been removed i have been looking everywhere and still have not found anything about this subject i ran a new ground checked all my wirring and still cannot find the problem. Thankyou
@brandoexplorations9202 3 жыл бұрын
1996 mach 1 670
@MyOldSled 3 жыл бұрын
Ill think about how to create some content, i haven’t had that issue so I’ve never problem solved it. My guess is a bad wire or connection keeping it from grounding out. Electrical issues are a lot of trial and error.
@MyOldSled 3 жыл бұрын
Actually, thinking about this one, I have to be clear I'm not a sled technician, I'm a guy with a sled who likes to tinker. Your tether and kill switch are safety features, and need to be working properly so I don't want to steer you wrong. I know on my rev the kill switches are prone to fail. They get dirty and won't ground properly. I've never had this happen on my 670. If it was me I'd be checking each switch for continuity, checking the main wiring harness connection since both aren't working. Check the wires right from where they come out of the stator. Sorry I can't be more help. Check Doo talk, some really knowledgable guys there.
@brandoexplorations9202 3 жыл бұрын
@@MyOldSled allright thankyou
@MyOldSled 3 жыл бұрын
Lol. Omg guess what happened to me Brando?
@rebeccab.6178 Жыл бұрын
Hi I have a problem wuth my winch/solenoid can you help me
@MyOldSled Жыл бұрын
What’s up?
@viktor7495 3 жыл бұрын
I have had this happen so many times I keep a rachet strap to raise the blade
@MyOldSled 3 жыл бұрын
That is a great idea Viktor.
@MyOldSled 3 жыл бұрын
I wish I'd thought of that when I was making this video.
@viktor7495 3 жыл бұрын
What should I do if I lose steering
@MyOldSled 3 жыл бұрын
Can you be more specific? Are you asking about what to do when it happens or how to fix it? What do you mean lose steering? Do you mean the skis aren’t turning or you’re sliding around?
@viktor7495 3 жыл бұрын
@@MyOldSled if you are going down a trail and you're skies wouldn't turn what would you have done in this situation
@MyOldSled 3 жыл бұрын
Hmm. Never happened to me, but you do read it happens from time to time, bolts fail, parts brake. I'm no expert, but I can't think of a lot of options other than try to come to a stop as smoothly and safely as possible. Let off the throttle, apply brakes smoothly, don't shift my weight at all. Probably end up getting towed. What would you do?
@viktor7495 3 жыл бұрын
@@MyOldSled I ask because I had my handle bars brake off and no steering is sketchy so asking for the next guy
@MyOldSled 3 жыл бұрын
hehe, yep, no steering is sketchy. So what did you do?
@dani6293 2 жыл бұрын
Im Glad I Found You
@dani6293 2 жыл бұрын
I AM Subscribing To Your Channel Thanks Hun I Love The Step By Step ♥
@MyOldSled 2 жыл бұрын
Mostly snowmobile stuff, but hopefully more ATV content this year.
@dani6293 2 жыл бұрын
@@MyOldSled thank you hun ♥
@dani6293 2 жыл бұрын
Thank You Hun Cleaned The Studs On My Winch ll Works Great Thank You I Have 2007 Can Am Outlander Xt 500 Max HO Hugs
@MyOldSled 2 жыл бұрын
Awesome Dani. Glad it helped.
@dani6293 2 жыл бұрын
@@MyOldSled I Could Give You The Biggest Hug nd Thank You SO Much We Had A Big Storm Up Here In Northern Maine It Saved Me ALot Of Money Thnk You Again Hun Hugs Tight ♥
Jim Dolson
Рет қаралды 1,8 М.
Kapper Outdoors Modern homestead
Рет қаралды 2 М.
vazovskie.official
Рет қаралды 1,2 МЛН
MK Bike Stunt• 532k views • 8 hours ago
Рет қаралды 3,8 МЛН
BUILT DIESEL MAFIA
Рет қаралды 2,6 МЛН
jamoloniy
Рет қаралды 1,3 МЛН