I have the same code , going to take the washer apart tomorrow hopefully I just have to clean the filter but now that I saw your video it’s more info that I didn’t know before 👍👍 Videos like these help a lot of people out there like me

I replaced the control board, replaced the pressure switch, cleaned the trap, and cleaned the "air dome hose" and its attachment that you mention. Same codes remain. I'll purchase a whole new "air dome hose" and cross my fingers. Such a tiny hose for $40, what a rip off. Thanks for the tip; something else to try.

I hear you saying “this is my problem” and showing me an elbow, but what was actually wrong with it? Why was this the issue? How did it fail? Was it clogged, torn, leaking?

Thank you!!! Resolved my issue without having to do anything else! Thank you!

After allllll my 'fix' attempts, my issue was a clogged input; where the cold and hot enter the washer.

Thanks man. Seems like my clamps slipped off

Exactly the info I was looking for. Thanks!

Hello... I'm having that exact same problem.... Thank you for the video... Was the part you replaced that black hose? The video was a bit dark.

Thank you very much

You're a problem solver. Very helpful! Can you please post the part# and a link for it?

What did you change? did you change the hose from the pressure switch to the tub? or just the fat hose at the tub?

i have a maytag maxima steam front loading washer approximately 10 years old. throwing F03 and E01. cleaned the catch basin with no results. dropped the pump off the bottom (nothing in there) and proceeded to take the pressure line and waste discharge line off. cleaned the slime out of them and paid close attention to the air dome. once clean i reinstalled and then saw @theonlygrizz's post. i removed the cold water hook up to the machine and lo and behold it was 1/2 clogged with rust. i removed the filter screen and cleaned it well. reinstalled everything and plugged the machine back in. heard a weird grinding/spinning noise for 15 minutes and thought the whole thing was trashed. miraculously after that 15ish minutes it seemed to dial itself in and was able to run a load flawlessly. after a load today seems to be running okay. clothes smell fresher and feel cleaner. don't think this is a complete fix but if i have problems again i will most likely try changing the hot/cold water intakes first. ps all you have to do to check the cold water intake is unscrew your line from the machine

Any idea of anything else to try? I’ve now replaced the pressure switch, the hose, and the air dome, cleaned the trap. And now getting the error code again still… don’t know what else to do.

How do i fix the f08 e4 code on the same washer

I replaced both switch and bottom part. Still getting codes. Yes I cleaned trap

As far as updates go, has the washer been working fine since you changed this part?

Thanks! This worked for us!!

Thanks for sharing

What was it called and part number#. Thanks.

So what exactly did you replace ? Hose? Sensor? Or one way clear valve

I replaced the pressure switch and the air dome trap and am still getting the error. The machine was draining, and I took the drain hose of the drum to make sure it was empty and am still getting an error. Any other ideas on what might fix it?