You can get the pump here.. amzn.to/3bVBkI6

So glad I stumbled on this video! I only ever found info about cleaning out the filter/cleanout. But the pump was my problem the whole time. Changed it out tonight and the washing machine is sooo much quieter now. Thank you, thank you!

I can't believe how simple the fix was because I watched this video. Took me around 10 minutes to take off the back and get into the filter... the filter was LOADED with crap (and coins). Thank you so much for making this video!

THANK YOU. Piece of cake - just needed to clear out the gunk and now know this will be a maintenance thing I need to do every now and then.

Thanks - I found an empty dog waste bag in the trap. I'm gonna go ahead and assume that was my problem. Great video though - you saved me a service call during a pandemic!

Great video. I cleaned the trap and put it all back together only to have the error code come back. So I took it all back apart and took the pump apart this time. The pump looked clear but was pretty warm as if it had been struggling. Almost put it back together but thought I'd shine a light. Found a womens bobby pin sitting in the opposite side of the pump assembly. Just enough to arrest the impellers. Working great now. Lesson - Check pump and trap while you have the whole thing apart. Do it right or do it twice.

This is a very good video, and one of the few that actually explains that this error code can also indicate a pump issue. Nice work!

Thank you! I was able to open the top and find the unlock tab! Just want to say that your pump replace video was one of the clearest, most direct of any “how-to” videos I’ve watched, on any subject.

Just wanna say THANK YOU for going through how to check the drain filter, because I was searching for videos on how to replace my drain pump when really all I needed to do was clean out my drain filter. Thank you, again!!

Thanks a lot, brother. I just finished this job on my machine. I was getting this code along with a "Sud" signal... At first, we thought that just meant too many suds and tried to reduce our detergent per load. But the code kept coming back. Pulled the filter and out came 4 face masks and a little jewelry bag.... No problems with the pump bearings, thankfully. The wife is hand washing the face masks from now on, she says. Ha! Saved me at least 100 bucks.

Thank you for this great video! I fixed my problem!! Error codes E01and F09 led me 1st to the filter. The filter was clogged with baby socks & lint!!! Your step by step instructions were right on point. I called a technician initially who quoted me an estimated cost of $300 + cost to repair. Took me about 30 mins, & I was up & washing clothes. Many thanks!!

Thank you! This was far easier than removing the whole front of the washer as others had suggested.

Thank you sir. Cleaned the filter as suggested, but still encountered the same issue. I ordered and installed a new water pump (easy, thanks to you) and she is running like a champ. Can't thank you enough, sir.

We cleared out the gunk but no joy. After waiting a week for a replacement motor though we were good to go. Thanks for the help! Much cheaper than paying a repairman or getting a new washer.

Thank you for this great video. I followed the steps and cleaned out the drain filter for our washer. It totally worked - amazing!!

Wow! After reviewing several DIY videos I was thinking I was going to have to replace a sensor hose or the pump mentioned. Turns out, my wife had washed a bunch of small pieces of fabric. The whole filter was clogged (my wife knows better now). Easy fix! Thank you for sharing :)

I have the same washer and this was driving me crazy. Mine was really clogged up. To bad I could not post a picture. Thank you for making this video, much appreciated.

Thank you so much. I followed this video to a T and I fixed my washer myself! Thank you!!!!

If I was able to help you save some money you can donate a small amount to my PayPal at www.paypal.me/Moagitater So I can keep making these washer and dryer repair videos. Also dont forget to Subscribe.. "it helps my channel grow"

Just what I needed! Pulled the filter out, cleaned, reinstalled and still no luck! BTW, I found some unusual things but was able to identify all but 1! Now I know that it was the pump seal! We will order the new pump ASAP! Thank You so very much and you have been a blessing to us!

Great video! Also saved me a service fee. Found a sports bra pad in there along with a ton of lint. It was completely blocked. Thanks so much!

It's amazing how easy it is to fix appliances but people don't just do a search and find videos like this. I fixed my old washer about 5 times from youtube videos including the control board. But it finally gave up the ghost at 16 years. This is the best pump one I have seen, I had a LG but it looks like they are all the same.

Thank you for the video! I have the Maytag MHW8200FW0 washer and I found 2 bra pads + a ton of dog hair. This was my first time cleaning it in 4 years. I am sure the error code E01 + F09 was because the bra pads BLOCKED the flow of water. Surprisingly, the pump had minimal amounts of dog hair from my husky. The pump pushed it all out but the pads were the main culprit! Thank you!

Thank you so much! Saved me waiting 2 weeks to get a service call. You made this seem so much less intimidating and I was able to do it myself. The filter took a little bit of elbow grease to get free at first but smooth sailing after that. I apprecaite you sharing your knowledge!

Thank you SO much! You saved us during quarantine. Unclogging the filter did the trick for us. I needed help moving the washing machine out from the wall, but it was otherwise simple to do.

Thanks for the help! I replaced my pump based on your helpful guidance in this video. Ordered the pats through Amazon and only challenge was that one screw that was set back. I was able to wiggle it free when I swung the pump open.

Extremely good directions. Made the fix pretty easy. My Maytag had five Philips screws instead of four screws. I couldn't get the pump to swing back into to position. I had to remove the hinge bolt and push the pump directly into the pump housing. The video and verbal directions were great. Saved me a lot of time.

Thanks to you, I was able to fix my machine, and I really appreciate it! I was shocked to find 9 face masks and 1 reusable absorbent pad clogging the drain!

Your are fantastic! Found a couple face masks in the filter trap. 😖 Your clear video and step by step instructions helped me fix it and save a bunch of money! Thank you!

I know it's been years since you posted this but wanted to let you know you save me so much money n time with this video. Just want you to know how much I appreciate you n thank you sir. Merry Christmas to you and your family

BINGO!!! After removing the drain plug, I removed the pump and discovered it desperately needed to be replaced! Thank you so much for your videos!

This video helped me a great bit. I followed step by step and it now works perfectly. My filter was clogged but the pump was cleared as it was changed 4 months ago by Maytag repair. Thanks again!

MANY thanks! our washer threw the error about an hour ago i googled the error and your video was first! we pulled a total of 6 baby socks out of our filter just now... lol. washer is up and running great again :) makes me wonder if this is the same problem the washer in our double stack. hmmm..

Awesome job! Saved me at least a hour of searching and disassembly of things that didn't need it! Thank you!

Thank you so much for this video. I unscrewed the filter but it was clean. I tried opening up the drain pump like you demonstrated and I had a small wood panel nail lodged in there. I removed it and my washer is draining again. My wife and I are expecting a baby this month so the potential expense and headache we avoided is such a huge help. Thank you!!

Thank you so much! This helped me fix our family washer without having to call a repair tech.

Thank you for saving me a new washing machine or at best a service call. My pump was shot. Cleaned filter,installed new pump and back to washing. 59$ fix.,Take care

Thanks for making this video! It saved us an expensive service call!

Thank you! This 100% solved my problem - it was like a solid brick of "stuff" in there!

I’m so thankful for your video, I have been searching for the right video showing this exact process and yours is the only one I found with this washer. Directions were clear now I can check my impeller to see if that’s what’s throwing the code. Thank you very much

Thank You! Helped me out big time.

Thank you for the info. Wishing you well.

Thank you for an easy to follow video. You helped us fix our problem!!

Thank you sir! You saved me time and $$$!

Excellent! Thank You!!

Thanks! I found 2 small kids socks in the filter, a ton of water came out because it couldn't drain which overflowed the container i had so be prepared. Works great now!

Very useful video thank you!!

I have the Maytag Maxima MHW6000XW that was throwing the E01 F09 code and the "Sud" code and found these videos showing how to check the drain trap. This model has the pump/drain trap in the front which is hard to access but this video shows a great easy way to get at it. It definitely works and once I got the trap out there was all kinds of stuff in there. As mentioned, the real challenge is getting the metal spring loaded seal hoop back on the gray rubber seal boot once you are all done. It CAN be done by hand, but I highly recommend having another person help hold the hoop in place at a couple spots while you do the final stretch and pull over the lip and snap it in place. I couldn't do it all by myself, but with a helper got it on the first time. Also, FYI there's another video showing another black hose to check for blocks that's in the back of the unit with clamps on both sides....it's easy to reach and worth checking for cleaning out as well.

Great video, easy instructions. The only thing that was different with mine was the screws were top mounted.

Thank you for the video installed the new pump, cleaned and checked thr hoses. I appreciate your help to help myself.

This was very helpful video thank you

Thank you very much you are professional and very good teacher. Gud bless you

Very informative.I believe I have your exact washing machine. I'm now on my third pump. I still love the washing machine but I wish those pumps had a little more durability to them. I like the simplicity of the washing machine once you get that back panel off. There's not a whole lot to them.

You save mi Maytag! Thank!

Great video!!!

So Helpful!

Thanks so much for this video! A broken screw was stuck in my drain pump impeller. Now I'm back washing. I'm not sure how people fixed things like this before youtube.

Thank you sir you might have just saved me from buying a new washer!! God bless you

Great directions. Thanks so much. These are very good machines. Mine gets worked hard. Still working great.

Awesome video. Wow! you are a great teacher, too!

Good work

thank you! it was very helpful..save $ to have someone to repair..

you saved me! thank you so much!!!🙏

Thank you! This works

You are the MAN!!!

Excellent explanation thanks…

Thank you!

I wish they would redesign and place the filter trap access to the outside of the case.

Great video, wish I had watched it before I started. My screen was clean so I want to check the pump. My pump looks the same but when I took out the 4 screws the pump would not open. There is another piece of plastic along the side of t he pump. it has a notch on it but I can not figure out how to get the pump open.

Thank-you! Filter clogged with dog fur!

Great video! Thank you. However, before I looked up your video I turned the machine off when I saw the error codes. This caused it to start draining and it wouldn’t do anything more except make the draining noise. So I unplugged it. I have tried to do your unlock technique, but it will not work now. It just keeps making that draining noise. Will, I still be able to get my machine to turn back on and unlock the door after I do the repair you show in this video? I tried to reset and unlock the door and it wouldn’t work.

What is the part number for this motor. Never mind I found the link in the comments $50-60 part. Cool! Your video is awesome! my part is coming Thursday.

Your video was very easy to follow, though my pump had 5 screws. Took me a few minutes to realize that was what was preventing it from popping out. Filer and pump were clear, but appears the pump is bad. Do you know if when I install a new pump if it will reset the washer? When I plug it in (with the old pump) the display screen is blank and it keeps trying to drain with the door locked light flashing. No other buttons on the front of machine work. New pump arrives tomorrow, so I am hopeful that solves the issue.

Besides the error code, did the machine make any noise? With ours, we were able to clear codes in the past and replaced the Washer Water Level Pressure Switch W10448876 Genuine OEM, and that fixed it, but now that didn't work after replacing it. It sounds like it's trying to pump out water but there's nothing there. The drain isn't clogged. So I'm wondering since there is a noise if we plug it back in, if that the pump.

Any chance you know how to take the vent pieces out of dryer so i can clean it all out? Thank you

Hello, does anybody know where i can purchase the water pump?. I tried Amazon but they didn't show me the model for this washer.

My model has 5 screws as we'll. Couldn't figure out why it wasn't swinging out. But did figure it out eventually.

Where did you order the replacement pump? Thank you very much for posting this video..

I am hoping this is my issue with my washer! It is making a grinding when it pumps water out during the spin cycle. I have cleaned the filter so I think the pump is damaged.

Good

I need just the part that swiveled out, not an entire new drain pump, I’ve looked everywhere online for just that part. Do I have to buy the entire pump and just take that piece off the new one?

Mine pumps out all the water then just keeps pumping and won’t shut off?? Is there a flow switch inside the pump or do I need to change another switch. I believe the pump is ok? I did a quick cycle after the first pump out of water it just kept pumping and the water was out. The cycle stayed at 18mins as well and didn’t continue. I had to cancel the cycle?

i opened mine from back surprise!!!I guess after these helping videos they changed its place! my filter was looking front and it was all the way front end!!! I could reach with my arm but not seems possible to take it out or clean it from back!!!don't know what to do!!!

The video helped so much! But now it won’t stop leaking. Any pointers? Did this happen to anyone else? I made sure it wasn’t cross-thread and made sure it was bone dry before I screwed it back in

Great video! Do you know how I can get the door open to get my clothes out until I can do the repair? Thank you!

I can't actually unplug the pump. Is there a clip holding the plug in? or do I need to wait for my 16 year old with stronger fingers to remove the plug? I'd rather not create another problem by forcing it if there is a clip or something holding the actual plug in place. But I'm incredibly frustrated at not being able to fully remove the pump. Thank you for a great video.

I have changed the drain pump, cleaned the pressure switch hose, cleaned the drain hose. I have great drain water pressure, so water is draining fine, yet I still get SUD error code and long drain time error code. What else can I check shy of changing the pressure switch? Thank you

Where can I buy a new pump for this exact model in the video??😊

Great video, any info on the pump part number?

Do you have the part number to the pump I have exact same unit and Al ready cleaned the filter but still makes codes and I never checked pump

Piss poor design. What if the washer is in a place where you can’t get to the back like a washer normally is in a laundry room? They couldn’t have made the bottom front panel come off to make it easier to get to the coin catcher?

The screw on the right was taken out of one place but put in another place. Is this okay?

What is the the part number fir the motor replacement. Mine was not clogged...so need to replace motor but can not find it anywhere I can order

I swapped out for a new punmmp got same error. What could be the problem?

Good morning my friend, our washer just up and died yesterday, my wife said it wasn't spinning and the control panel was acting up, also the door will not unlock. It sounds like the water pump starts running when I plug it in right by itself, I pulled it filter out and it was completely stopped up, I cleaned everything up and put it back together, and when I plugged it in I got the same thing. The pump starts automatically no matter what I do. I have done the control panel reset several times and it is still doing the same thing. HELP

Ivan do you happen to have another link for the pump by chance?

Ok so I checked the trap, which was clean then ordered the whole assembly (pump and all), replaced it and still get the error code???

Bud I hope you can help me🙏🙏🙏 I just replaced the drain pump and the same error codes popped up😭😭😭 What could be the problem?????

I checked the trap, nothing. I replaced the pump, same problem. I replaced the air valve, same problem. I replaced the check valve, same problem. My wife then got the bright idea to change the spin cycle Medium on every wash load. So far, it has been 6 months without a problem. I think sometimes the spin cycle doesn't let the water drain causing the problem. Change the spin rate to medium or slow and see if it helps!

Where can i order the pump replacement filter?