This is how I fixed the turn signal on my 2003 Mercedes SL500
Пікірлер: 10
@joelblauvelt50624 жыл бұрын
Love your excitement when it worked!! Good for you, Man & Thanks for sharing!
@joelblauvelt50623 жыл бұрын
I had the same problem. I removed the bulb holder, drilled thru the back & soldered a wire onto each bulb terminal, stripped & connected directly to the correct 2 leads on the harness. No removal of anything required.
@goldelementautoworks3 жыл бұрын
Genius!
@manfromatlants11 ай бұрын
Plz explain how did you connected directly to the correct 2 leads on the harness.
@reys_live7243 Жыл бұрын
My 2004 Mercedes benz clk 500 turn signal don’t blink stays solid orange passenger side , tried everything any suggestions or links for a solution 😮
@reys_live7243 Жыл бұрын
I have a 2004 Mercedes benz clk 500 front passenger side signal light not blinking , what wire harnes do I need to by pass a new connection or where and what wire do I need to connect to it ??
@goldelementautoworks Жыл бұрын
I’m not sure with the CLK. You have to identify what each wire is in the existing harness. Use a voltmeter and an extra hand if you can. Have them activate the signals to quicken the identifying process.
@reys_live7243 Жыл бұрын
@@goldelementautoworks I want to try to connect a after market signal light but need to locate the correct wires to by by the after market harnes to see if that works , all my fuses are good not blown , so I thinks the actual harnes inside the head light that is shifting out causing problems or maybe the esp relay that’s is the steering wheel behind the horn connection to the signal lights switch idk ?? I just need to get my car to pass inspection
@mwlagana3 жыл бұрын
How did you fix the foggy headlights
@goldelementautoworks3 жыл бұрын
If it’s exterior......wet sand and compound/polish. If it’s internal, disassemble and wipe out inside.