How I Glue Pull This Dent Out Using Lines: PDR Glue Techniques

Рет қаралды 30,336,727

3 ай бұрын

👉 Learn PDR online www.denttrainer.com
🛠️Here are the tools I used:
Line board - Elimadent @ansonpdr
Cold glue slide hammer Long AR @a1toolpdr
Cold glue (sergio’s) @ansonpdr
Galaxy peak tapndown @ansonpdr
Hot glue - pink snapper - @ansonpdr
Trifecta cordless glue gun @ansonpdr
Orange tab - tequila @ansonpdr
Cactus juice @ansonpdr
📞 CALL 📞
📞 800-420-DENT (3368)
💬 TEXT 💬
💬 PHOTOS 💬
💬 858-943-9676 💬
🌐 Our Websites 🌐
🌐 www.denttime.com 🌐
🌐 Escondido Location 🌐
🌐 www.dentremovalsandiego.com 🌐
💡 Learn PDR 💡
💡 www.denttrainer.com 💡
-----------------------
💻 Estimates generated using standard price guide app @mobiletechrx 💻
💰Similar dents like this cost range: $225-$400
-----------------------
❤️ Double Tap ❤️
-----------------------
✅ Satisfaction Guaranteed
✅ Mobile Service
✅ 5⭐️ Company
🚫 No Repainting
🚫 No Car fax Report
-----------------------
🚗 We Come to You 🚗
🏢 Or visit us at 🏢
🏢 Dent Time 🏢
🏢 2120 West Mission Rd. Ste. 240 🏢
🏢 Escondido, CA 92029 🏢
-----------------------
Learn PDR online denttrainer.com
#slidehammer #autobody #gluetabs #hotglue #coldgllue #minilifter #keco #canamauto #anson #highspots #gluepulling #autobodymethod #paintlessdentrepair #gluepullingdents #paintlessdentrepair #learningpdr #pdrschool #gluetabs #coldglue #colafria

Пікірлер: 3 700

@totallynotthefeds36 3 ай бұрын

Whoever thought of the strip lights is an absolute genius

@tizme6105 3 ай бұрын

Yep. I could have done with that light source in the body shop 60 yrs ago.

@Stinger296 3 ай бұрын

I’m guessing whoever thought of it had fluorescent lights in their shop

@exposingthetruth3821 3 ай бұрын

I do the same thing, but it's a magnetic base block that has a grid of lasers each direction, about 3mm apart. I honestly like this light better tbh. The light bars show considerably better what needs to be done. I'll be investing in such, it's a great idea.

@jaycreate7701 3 ай бұрын

I instantly recognized it cause in blender there is a matcap, which allows you to see problems on the model's surface, just like it.

@amac7706 3 ай бұрын

You're welcome

@RapidRedRider 3 ай бұрын

I learned more in this short than in every PDR video I’ve watched Edit: not sure why my comments are being removed but to answer a few people who have asked, PDR is paintless dent repair. It’s an art form as far as im concerned

@_TheRealDoe 3 ай бұрын

I swear

@RinkyRoo2021 3 ай бұрын

I was always interested in this paint matching is really hard , DIY automotive school has one video but Pete just yells and its stressful 😅

@justinstromski2435 3 ай бұрын

Agreed!!!

@franciscoassumpcao 3 ай бұрын

Now I can look for a professional who has the correct techniques.

@imagri1 3 ай бұрын

💯

@CrookedSkew 3 ай бұрын

This is like a magician showing how their trick works. Thank you. You are so very skilled!

@TheRealMCD 3 ай бұрын

This is such a great use of the Fringe pattern. Light reflected of a smooth surface never lies to reveal its true shape 💡

@yeeeeeeet7378 3 ай бұрын

The fact that he puts the dent in himself shows how confident he is in his work. AWESOME brotha

@erhanciftci8003 3 ай бұрын

It shows there is no customer because of recession.

@markgigiel2722 3 ай бұрын

It's not his car.

@Steve.._. 3 ай бұрын

@@erhanciftci8003yes bud. A recession. Ah. So what's with every business around me booming? 😂😂😂

@DONTCALLMETHAT 3 ай бұрын

Trust..... He's done it several times before on a practice vehicle to have this kinda confidence. Either way it's impressive😂

@masterpopeyoda3290 3 ай бұрын

I'd hardly call that a real world dent though, I'd be interested in seeing how the glue trick works on a minor fender bender sized dent.

@Iburn247 3 ай бұрын

That line technique is absolutely perfect

@A3urden0nU 3 ай бұрын

It’s insanely satisfying to see

@vyvianalcott1681 3 ай бұрын

I've done a lot of trades and this is definitely much more art than anything. Incredibly impressive.

@deathiv9792 3 ай бұрын

Where can i buy that line technique ?

@Iburn247 3 ай бұрын

@@deathiv9792 I'm not sure, try to post that question in the main thread so the guy who runs the channel can see it. I'm sure he will let you know. Seems like a light with a grate style plastic attachment on it. A really clever idea

@simonb7208 3 ай бұрын

@@deathiv9792 I just typed in " line light car dents" in Google and it showed them

@Headbangyaa 3 ай бұрын

戻す工程よりも縞模様のライトを当てることが理にかなってて感心した！

@masas2443 3 ай бұрын

たしかに

@user-ru1cf3ux8j Ай бұрын

本当それ！

@DrewLove777 Ай бұрын

My goodness the industry has advanced so much since I had my shop. That technique is amazing. 🤩

@denttime Ай бұрын

It really is!

@xjcrossx 3 ай бұрын

That was impressive. I've never seen that light or filter with the lines before.

@Kau001 3 ай бұрын

it's an ordinary lamp with a piece of plastic with lines, everyone uses it to see where are the inequalities

@mattheww9656 3 ай бұрын

@@Kau001 He didn’t ask what it was, he just said he’s never seen it before.

@Kau001 3 ай бұрын

@@mattheww9656 you like to cause problems huh?

@mattheww9656 3 ай бұрын

@@Kau001 Sorry, you’re alright pal. Just pointing out that he realizes it’s a light with lines over it. I think that we can all see that. But, thank you for your service.

@Kau001 3 ай бұрын

@@mattheww9656 I wanted to explain to him that it is nothing specialized and that it is easy to make such a lamp to learn how to stuff holes, maybe he would like to learn, so I wrote to him what it is for

@voodoo917 3 ай бұрын

Hands down, that's the best dent removal tutorial on all of KZfaq!

@davidkirby-jx9xp 3 ай бұрын

Hey KZfaq! Get your sht out of the way so we can read ...

@XeresKyle 3 ай бұрын

How many dent removal KZfaq channels do you watch? 😂

@OfficialDMPBaby 3 ай бұрын

I agree in that

@alexiss.marquez7096 3 ай бұрын

This is by far the best video on dent pulling very quick but so so much information given. Thank you

@andypacmanperez 3 ай бұрын

I had an amazing pdr guy I worked at the dealership with when I was a recon manager. He showed me so much and I honestly saw him fix things that amazed me. Dude was a joy to watch work and a master in his craft

@dobrofool 3 ай бұрын

Illuminated lines. Absolutely brilliant. As both a mechanical person and a photographer, this one floats my boat on so many levels. Very cool.

@alainlaurent3524 3 ай бұрын

Système de quadrillage pour suivre les lignes parallèles qui indique la déformation est extrêmement ingénieux ! Félicitation

@ernestogonzalez4398 3 ай бұрын

Some people come up with mind-blowing ideas

@mattlacasse5828 3 ай бұрын

Air floats my boat

@joseZirrionJeredia 3 ай бұрын

Me pareció ya solo ingenioso el hecho de que se veía muy bien el golpe en cámara con la luz

@eilzmo 3 ай бұрын

@@mattlacasse5828yeah? Water does mine

@alexandrevaliquette3883 3 ай бұрын

Pro tip: You save time if you skip the hammer part.

@ApeHolder42069 3 ай бұрын

Was about to say it was a lot better before he smashed it with a hammer! 😂

@Papa_Pasghetti 3 ай бұрын

Hahaha, stupid! You sound fun, dude... I actually laughed a bit. Thank you.

@vendingdudes 3 ай бұрын

😂😂😂

@dirkhaar2243 3 ай бұрын

SNL on board?

@charlieellis592 3 ай бұрын

I can't even stand doing it on accident.

@wyaldkingdom Ай бұрын

I don’t do this type of work but there is just something so satisfying about watching it get done. I love this!

@GodBlessTheATF 3 ай бұрын

Excellent work. This man is on another level!

@denttime 3 ай бұрын

Thanks!

@mewvirus9882 3 ай бұрын

That is actually genius. I’ve learned a lot by this 60 second short then most 30 min repairs.

@taylorhochkievich7023 3 ай бұрын

Straight up lmfao.

@Thawhid 3 ай бұрын

@@taylorhochkievich7023 lmfao

@hectortrevino3147 3 ай бұрын

Too much work....just don't hit it with a hammer

@VladimirLem86 3 ай бұрын

Your learn something new every day. The lines made by the light is an awesome technique

@denttime 3 ай бұрын

Thank you! Cheers!

@BunZen 2 ай бұрын

Artists use this technique too, to show a volume

@ARSZLB 2 ай бұрын

it is literally the most basic tool for PDR. every single person who does this has that

@NateForTree 2 ай бұрын

@@ARSZLBkeeps everything clean

@xUSMC_0311x 2 ай бұрын

Virgin vibes. @@ARSZLB

@rattdog777 3 ай бұрын

Looks easier than it is. He's got skill !

@ronaldhaugen5967 2 ай бұрын

This operation has come along way ,that is amazing thanks😮

@joelberkson6922 3 ай бұрын

For those who don’t know this is a super clever method used in optical metrology called deflectometry! It can actually be sensitive enough to see 10s of nanometers of surface deformation

@benmartinez457 3 ай бұрын

Simple English, you nerd! What do you mean? Elaborate, explain, and breakdown? I aspire, and hunger to learn. You have released Oryxen, and Ghrelin through the bowels, and entrails of my inquisitive mind. Now teach, thee nerd.

@cirytowcatitow7842 3 ай бұрын

Tu cola wanga 😂😂😂

@leondelbarrio8613 3 ай бұрын

In other words, It work's? 😮

@iamshredder3587 3 ай бұрын

Optical metrology? Never even heard of it. 😅 Metrology is like the science of measurement or study of measurements yeah? And optical like sight or the phenomenon of sight and it's connection to the visible light spectrum? Or something like that, probably not the best definition haha. So something to do with the science of measurement systems relating to the visible light spectrum and how we humans perceive it through sight? Something like that?😄 There's really a science and an expert for everything these days. )) Interesting though. Thanks for sharing. Can't help wondering how' you'd know that. And nanometer? So, small? Really small? Nano = one billionth of something if I remember right . Or a thousand million. (I used to think it was a million millions for some reason) So ten nanometers = 10/1000 000 000? Or in technical jargon, as I said... real real small. :)) Fascinating though how much we know and are still learning day to day, not slowing down but faster.... and yet how much there is to know and how very very very little of it we as a collective actually know let alone as individuals. Except in the internet of course, where everyone knows everything about everything. :))

@caustichonu 3 ай бұрын

@@leondelbarrio8613No. It works. 😅

@Jack-yg7de 3 ай бұрын

The moral to this story - don't hit your car with a hammer. Cheers.

@hasantahsinertugrul654 3 ай бұрын

😂😂😂

@fierosanon2525 3 ай бұрын

😂😂😂

@luckyluck6622 3 ай бұрын

THE MORAL OF THIS IF YOU CRASH YOUR CAR JUST HIDE IT AND REPORT IT STOLE AND GET A NEW ONE . BODY SHOP DONT WANT BODY DENTS ANYMORE

@deenugent473 3 ай бұрын

I wonder how long it would take to use this technique on hail damaged cars?

@Simon-pl2zi 3 ай бұрын

herp derp

@user-ui6bt4jz6j 3 ай бұрын

내 경험상 우선 페인트를 갈아내고 스팟 용접기로 눌린 부위를 뽑아내면서 면을 잡아야합니다. 물로 뿌려가며 수축시키고 면을 다듬고 최종 도장으로 넘기죠. 저 상태에서는 철판이 조금은 늘어난 상태일수도 있겠네요.

@Zanooz 2 ай бұрын

The lines are actually genius, well done.

@CheyenneMarket 3 ай бұрын

Cactus juice: It’ll quench ya

@denttime 3 ай бұрын

😊

@Dolovsky 3 ай бұрын

It’s the quenchiest!

@PersonManManManMan 3 ай бұрын

Very quenchy

@RicardoLopez-ts3sr 3 ай бұрын

@@Dolovskyzaka?

@JonnyParker- 3 ай бұрын

milky goodness

@johnnytr0uble 3 ай бұрын

Holy crap. That light with the lines is amazing!

@ugsskywatchermckenzie4319 3 ай бұрын

@BeanieKing 3 ай бұрын

Thanks, they've been making flashlights since the 1800's!

@dirkhaar2243 3 ай бұрын

Might even be better with squares, but...

@GeorgeGooner86 3 ай бұрын

What’s the brand?

@evidentloss 3 ай бұрын

My toxic trait is that I'm absolutely positive I could be incredible at this in 6 months time. This is right up my alley.

@PintuMahakul Ай бұрын

Glue pulling show brought up! We highly appreciate your effort and time. Thank you very much for sharing.

@denttime Ай бұрын

Our pleasure!

@drewdavis7244 3 ай бұрын

The crazy part if you think about it is the fact that the metal is being pulled back into shape by the paint.

@denttime 3 ай бұрын

Yes

@rfcbass6810 3 ай бұрын

Yup

@RicDrgn 3 ай бұрын

The purpose of the body is to hold the paint and glass.

@leonidasking7502 3 ай бұрын

@@RicDrgnand stop 80mph wind and rain smashing you in the face

@RicDrgn 3 ай бұрын

@@leonidasking7502 I don't know where you live but that would be exceeding the speed limit here! 😂

@courtlandstephens92 3 ай бұрын

The lines in the light are something I’ve never seen before. Thanks for sharing your insight and knowledge.

@CB_7th 3 ай бұрын

This is very hard to learn but you don’t have to, pay this guy

@peteywee318 11 күн бұрын

I had to watch and listen 😆 🤣 😂 I learned something new today

@user-ci2xg7rq5y 3 ай бұрын

I had a very strange "dent" in my new Audi SQ5 that a PDR guy near me did an awesome job with. He called it a buckle as it really looked like the spot had been compressed and pushed upwards. No clue how it happened and zero paint damage. Cost me $380 and it's gone completely now. These guys have gotten really good at this.

@Rhaspun 3 ай бұрын

Yes. I remember when I first heard about this. I think it was in the early 80s. There was an article in Car & Driver magazine. They had mentioned the use of pointed metal tools to get rid of dents. The skills levels have improved greatly.

@user-uy7ff6zz5q 3 ай бұрын

Should of just bought those bullet hole stickers . Lol

@Papa_Pasghetti 3 ай бұрын

Madonna...! There's a dent on my girlfriend's car I've always thought I'll fix someday, when I get around to it, etc. Now I'm 100% convinced I gotta find a REAL professional like this guy to fix it., Bravo!

@denttime 3 ай бұрын

Thank you.

@AlanGresham 3 ай бұрын

I had a crack on some dents and learned very quickly how impressive these guys are. Then when I got a dent in my main car I got a professional to remove it and he did a very ordinary job. Ironically.

@lapprentisage7926 3 ай бұрын

@@denttime bonjour votre travail est juste impressionnant merci beaucoup pour vos vidéos nous apprenons beaucoup grâce à vous j’aimerai savoir quel est le marteau coulissant utiliser ? Et où se le procurer ? Quel est la différence avec les marteau coulissant de chez métal médic ou SG sticky gum ? On dirait les mêmes sont ils plus efficace ? Merci de m’informer s il voulait je souhaiterai acheter ce genre de marteau

@SteveSiegelin Ай бұрын

Thank you for all of this, this whole short was solid gold what's for me because I did not know half of these tricks.

@awesomelife1799 Ай бұрын

This was so satisfying to watch, i love it

@mball5764 3 ай бұрын

Yep very informative. Cactus juice send this guy a case.

@denttime 3 ай бұрын

Thank you.

@Player16 3 ай бұрын

Then he can use it on a hail damaged car... as if.

@HeartInLight 3 ай бұрын

The lines make it so visible, Genius whoever came up with the idea.

@davidpossien3061 3 ай бұрын

It’s like magic, Magic!

@woodiewill1907 3 ай бұрын

Having the right tools and knowing how to use them.

@TimothyHigdon 2 ай бұрын

I dont know what in this video im most impressed about.

@Iburn247 3 ай бұрын

Had to comment twice cuz this was amazing. Love to see someone take pride in their craft

@user-lh9cq7nq1b 3 ай бұрын

hdhshdhhdhddhhdhddhdh

@horsetowater 3 ай бұрын

Seriously huge skills there. Amazing work

@ivanboesky1520 3 ай бұрын

Yeah, fixing a dent in a car. Human society altering work. LOL

@rojakskills7851 Ай бұрын

I'm a panel beater...i love this skill..

@davidwindal1450 Ай бұрын

This is absolutely incredible. Genius.

@subliminal128 3 ай бұрын

Great video man!

@denttime 3 ай бұрын

Appreciate it!

@tubedude54 3 ай бұрын

What he did with the light is what's called a 'Ronchi test'... it is used in optical tests to determine the shape of glass surfaces... also works on any reflected light surface.

@kevinmoney4847 23 күн бұрын

Crazy just started doing body work engine & trans man for years this is amazing

@proximTeaMine 21 күн бұрын

When the customer doesn't pay you enough and you need to make sure the your pocket stays full 😂

@franciscobarcelo359 3 ай бұрын

Wow 🤯. The light. Simple, effective, genius.

@Michael-bx7ru 3 ай бұрын

Best man👍 greetings from Germany

@denttime 3 ай бұрын

Thanks for watching and greetings back! 🙏

@mistermaniac7042 2 ай бұрын

That’s actually insane 😮

@tiredoldman5329 Ай бұрын

Your really good at that!

@Fiendclub 3 ай бұрын

That’s art man! I have tried a few times to push dents out iv watched a few really good dent removers in action when I was a detailer your an artist!

@denttime 3 ай бұрын

Thanks 👍

@goosenotmaverick1156 3 ай бұрын

I spent some time in a dealership (parts) and we had a huge hailstorm. We set up extra space for PDR guys to work. I spent every lunch break for like a month watching them work and talking to them. Fascinating work, this stuff. And it really is an art

@PM-vb4od 3 ай бұрын

@@goosenotmaverick1156Yeah I bet they loved you bothering them while they were trying to work 😂

@goosenotmaverick1156 3 ай бұрын

@@PM-vb4od honestly they were super chill and encouraged me to buy some tools and a salvage door and practice. Not all of them are that cool, but the guys we had working on site then were awesome. A few of em were around my age and didn't seem to mind. I wasn't slowing down their money making process.

@goosenotmaverick1156 3 ай бұрын

@@PM-vb4od I bet you feel better being rude on the internet 😂😂 Have a better day.

@olegsamoshin9304 3 ай бұрын

Hi which lightning do you use? Great work by the way

@denttime 3 ай бұрын

I use many types of lights from Anson PDR, Elimadent, Stuckey Tools and Ultra Dent Tools.

@olegsamoshin9304 3 ай бұрын

👍👍👍👍👍👍

@Dkthearn Ай бұрын

This is the first video short that actually explained what it was thank God

@J.C... 19 күн бұрын

And this is why PDR > * These guys are absolute TECHNICIANS. Highly skilled tradesmen. 👌 I worked in auto body repair and refinishing so I know a tiny bit about dent repair.

@HappyHoldingCards-to9ic Ай бұрын

The fact that he puts the dent in himself shows how confident he is in his work.

@mr.tactown.253 Ай бұрын

Wow, this person can copy and paste top liked comments, lets reward this behavior with many likes . . Said no one ever . .

@RRachwal21 3 ай бұрын

You don’t need to put a dent in a car. I would have gladly offered my car for you to practice on.

@rockysworlddavis1296 3 ай бұрын

Lol good buddy .

@hasantahsinertugrul654 3 ай бұрын

😂😂

@joshuajohnson7183 Ай бұрын

Very cool! I work in the Paint Department at the Peterbilt Assembly Plant. That striped light is ridiculously cool!

@denttime Ай бұрын

Thanks! 🙏

@jaimescafegarage4111 3 ай бұрын

Beautiful man !

@denttime 3 ай бұрын

Thanks!

@Musicreach101 3 ай бұрын

Damn!! You have some mad skills brother !!

@denttime 3 ай бұрын

Thank you.

@yououtuber4176 3 ай бұрын

I've never seen someone using cactus juice in this way before. Man, this juice has potential.

@chadjoneslsu 2 ай бұрын

I know a guy who does PDR in Portland been doing it for like 20 years. Makes the big bucks . Not gonna say how because I want his niche to be for him

@kent4786 3 ай бұрын

Great work. Are you located in California?

@denttime 3 ай бұрын

Thank you. I am (Escondido- just 30 min north of San Diego)

@DirkOz 3 ай бұрын

Are induction tools better than glue tabs in this situation? Thanks for sharing your techniques.

@denttime 3 ай бұрын

Sometimes but depends on the sharpness of the center.

@ThestuffthatSaralikes 3 ай бұрын

That was flippin’ FASCINATING!!!

@infamousbgaming 2 ай бұрын

Literally watched it so many times cause those little taps to line up the lines was so satisfying to watch

@robburke8867 2 ай бұрын

Ok, I’m impressed!

@AngelReyesSkates 2 ай бұрын

That’s professional asf ❤ love that dude explains it all without having to go to much in detail

@mrmiagi6052 Ай бұрын

This is so cool, using the lights is genius.

@dr.fillyblunt7505 23 күн бұрын

Damn thats brilliant with the lights.

@MangoTreeWildAndFree Ай бұрын

Smart craftsmanship 👍

@bradfordjones71 Ай бұрын

This technology is absolutely amazing

@tomwhite9034 Ай бұрын

That's really cool I like that a lot. Very smart thinking

@ashwin8637 Ай бұрын

That was pretty cool

@FitnessAndHealthLife Ай бұрын

I have never seen anything like that before. Stunning and amazing.

@JymTMPH Ай бұрын

The lighting is so clever!

@therealanthony4978 2 ай бұрын

Just seeing your light and line tech that deserves a follow !

@denttime 2 ай бұрын

Awesome thanks 🙏

@rb2287 9 күн бұрын

This is an expert level stuff! Well done!

@dougkeyes4406 3 ай бұрын

The perfect use of symmetry in a job.

@Jart-qe3om 3 ай бұрын

Damn dawg, youre an absolute master! 🔥

@denttime 3 ай бұрын

Thanks! 🙏

@ansheljimenez9097 3 ай бұрын

Man.. this video shows me randomly and I'm speechless, who invented this technique? And this guy executed awesome

@Goodthingz78 2 ай бұрын

Love seeing professionals at work

@Suicaedere666 Ай бұрын

You rule🙌⚡️🙌

@szablitho3439 3 ай бұрын

Thats Smart using light reflecting lines. Best video showing how fixing dents is done

@CounterclutchHD Ай бұрын

It’s like a complex piece of art I love it

@johnfarscape 3 ай бұрын

That light is an absolute game changer, I was a panel beater and spray painter almost 30 years ago, and used to just have to try and get your head as flst to the panel, to look along the surface, it was a resl pain.

@COUNTINGSLURPULA 3 ай бұрын

That is genius!!!

@MitchellPierson 3 ай бұрын

Light glare to get a clear look at it, is really genius.

@jarvish.1898 2 ай бұрын

This is why specialty work gets paid really good until someone like this comes along and shows everybody how to do it

@DenttimeSanDiego 2 ай бұрын

And 100% of those people who try to do it themselves without proper training and knowing the details between these steps will make their Dent more worse and more work for the real PDR pros that will charge twice as much if the consumer didn’t try it in the first place. 😉 thank me later.