How I Made 26 Thin Blue Line Bottle Openers … For 1 Order! / DIY
Рет қаралды 4,444
2 жыл бұрынThere’s no doubt that the Patriotic AF Bottle Openers are too cool to pass up! They’re actually one of my top selling products of 2021 so I like to make sure I always have plenty in stock.
I made a previous video (on the channel!) about how to make an individual bottle opener and now, with getting in an order for 26 custom bottle openers, I decided to show you how I batch out large quantities of these openers!
This is also the process I use when I batch out these bottle openers for fair season! It saves time and money. The only difference here is that these do not have the magnetic catch in them.
Also, everyone has their own methods of doing things. So, if you have one that might make the process quicker or better in some way, feel free to comment below!! Just don’t be a D&$k about it!)
Time:
-2-3 days (depending on glue-ups)
Supplies used:
-Select 1x6x8 Pine
-Painters Tape
-Titebond 2 Wood Glue
-120-220 Grit Sand Paper
Tools Used:
-Dewalt 12” Miter Saw
-Craftsman 10” Table Saw
-Dewalt 20v Drill
-Ryobi Palm Router
-Dewalt Palm Sander
-Shapeoko/ Carbide 3D CNC
Paints and Stains Used:
-Rustoleum Satin Black Paint
-Minwax Oil Based Stain (Navy)
-Minwax Polyacrylic (Finish)
Router Bits:
-Chamfer (Edges)
-60 Degree V-Bit (Stars)
-3/8” Keyhole Bit (Backs)
www.amazon.com/dp/B08BF6B6Z1/...
If you liked this video, hit that like button for me!! And if you want to see more like it in the future, hit SUBSCRIBE!
Thanks All!
Mike
True American Craftsman Co.
Using power tolls is a dangerous process and proper knowledge is required before applying the use of these tool to any projects. This video is for demonstration and entertainment purposes only and should you follow this video, it is on your own accord and no liability will be held against the video/video owner if injury occurs.
@breslaj4 2 жыл бұрын
Dude, level out that table saw before you get hurt. Great video!
@Rescue896 2 жыл бұрын
Do you have the instructions on how to build the Key hole jig ? For the Bottle opener
@jameymeekins1752 2 жыл бұрын
Do you make them with magnet to catch bottle cap? If so do you have video?
@garyjohnson8573 11 ай бұрын
What is the size of the stars that you carved
@ralphdomenic7933 2 жыл бұрын
I used Miniwax Royal Pine for the Thin Blue Line. It turned out great. Yours may be better.
@Rescue896 2 жыл бұрын
I plan to make a 5x10 wood flag, and would like to know from your side how big the flag jig to build or the 2 by 4 foot jig is enough to support the larger size.
@erindavis3648 2 жыл бұрын
They look beautiful! But why do you rip them down and then glue them back up? Couldn’t you stain the center, tape it off and then spray paint?
@dougfield5301 2 жыл бұрын
What brand and model CNC machine do you have?
@charlestouchton4871 2 жыл бұрын
Do you have a file for the stars and a mock up for the key hole jig?
@charlestouchton4871 2 жыл бұрын
@@TrueAmericanCraftsman awesome thank you
@jackhealy8467 2 жыл бұрын
@@TrueAmericanCraftsman great looking project! I don't have CNC or lasers. Are there stars I can stick or glue on? Thank You
@jackhealy8467 2 жыл бұрын
@@TrueAmericanCraftsman thank you very much!
@jesseknowles7155 2 жыл бұрын
Where can I purchase a CNC router like this?
@jesseknowles7155 2 жыл бұрын
@@TrueAmericanCraftsman thank you and which bits do you recommend dor the router?
@jesseknowles7155 2 жыл бұрын
Actually can you send me a link for everything that's needed for the shapeoko 4.
@danhickey1186 2 жыл бұрын
Can I ask you what you charged for one?
@danhickey1186 2 жыл бұрын
Thanks!
True American Craftsman Co.
Рет қаралды 7 М.
True American Craftsman Co.
Рет қаралды 49 М.
True American Craftsman Co.
Рет қаралды 16 М.