How I Made a Custom Crankshaft
Рет қаралды 12,281
Жыл бұрынPart fourteen of my engine build, in this episode I carry out the final machining operations on the crank pin, finish pressing together the crankshaft and use my new V-blocks to true it up.
The goal is to create a running V-Twin Lifan engine, inspired by Allen millyard's ss100 V-Twin builds. I want to use as many standard parts as possible to make the build as easy as possible and reduce the number of parts I need to make.
/ oddsandendsmachining
#honda #vtwin #cnc #machining #project #foundry #casting #engine #homemade #ss100 #c50 #homemadeengine
@AutoBeta2T Жыл бұрын
Great work. Loving the progress and looking forward to seeing the engine run. Cheers
@RotarySMP Жыл бұрын
Nice one.
@jamesellery6866 Жыл бұрын
Awesome work! Enjoying your "get it done" attitude. Looking forward to hearing it fire up.
@OddsandEndsMachining Жыл бұрын
I’m definitely looking forward to wrapping this project up. It seems the more I get done the more there is to do haha.
@kwaka140 Жыл бұрын
I had a pin made years ago for an MB100 with an offset centre reducing the stroke. Cost about $1k including the dummy pin used for assembly and testing. Also cut down a FZR. Turned a 4cyl into a twin, the reverse of your work. Slowly working my way through your vids
@OddsandEndsMachining Жыл бұрын
They sound like some pretty neat projects, were you using them for bucket racing?
@kwaka140 Жыл бұрын
@@OddsandEndsMachining yes, for bucket racing. The MB made 30hp at the wheel in the end. The FZR has seen 32+ at the back wheel but it had a little accident. The new motor is sweet so far. Time for some boost
@kwaka140 Жыл бұрын
@@OddsandEndsMachining I have an MB engine in an FZR250 chassis making an easy 24.7hp at the moment
@OddsandEndsMachining Жыл бұрын
That’s pretty cool, seeing the fzr would be pretty neat. That’s a lot of power for a bucket.
@iancampbell6002 Жыл бұрын
You should watch CEE out of Australia..he's an amazing machinist and I bet he would give you some tips..on another note I love your work man 🤘
@OddsandEndsMachining Жыл бұрын
Thanks, I’ve been watching his channel for a while now, he’s a pretty clever dude, he deals with some big jobs.
@anthonydibiase3373 Жыл бұрын
Hi your machine is to fast slow it down so if you are doing 125 mm. per min. go to 95 mm. per min. i hope this will help you
@josephwaldner7752 Жыл бұрын
desynced audio
Gufee.medalin
Рет қаралды 9 МЛН
Miniature RUNNING V-Twin - 45 vs 90 degree V-twins - ENGINEDIY mini ENGINE unboxing, review, startup
driving 4 answers
Рет қаралды 80 М.
Allen Millyard
Рет қаралды 628 М.
Павел Хмурчик
Рет қаралды 128 М.
KOMPUKTER
Рет қаралды 186 М.
Buy Smart┃Магазин ноутбуков
Рет қаралды 310 М.