How I Repaired My Sanitizer Spray Bottle & Fixed it Twice !!

Рет қаралды 408,142

Күн бұрын

This is made inspired from the short video • Sanitizer | Spray Bott...
Recorded by : / @lovaharsha5080
Thumbnail: Used A.I. based image processing tool to convert real world image into cartoon.
0:00 Taking apart the bottle
0:14 Removing the Nozzle Cap
0:55 Opening the Bottle
1:10 Dismantling the Nozzle Assemble
1:45 Sperical Ball inside the pump setup !
1:57 The Nozzle Parts
2:32 All Parts of the Bottle
3:00 Replace, Clean the parts.
3:05 Joining all of the Parts
3:10 Nozzle Parts Assemble
3:33 Pump Parts Assemble
3:45 Inserting the Nozzle into Pumping Part
3:55 Joining the Nozzle with pipe.
4:10 Inserting the Internal Assemble into bottle Neck Cap
4:35 Closing the Bottle
4:50 Fitting the Nozzle Cap on to Nozzle
5:00 Testing the Spray Bottle
5:20 Success Party
Recently my sanitizer bottle stopped working as it fell down.
I opened up to fix it...
I found there is a small spherical ball inside the mechanism which is crucial for the spray to get worked.
That spherical ball has a spring on it and due to fall impact, that spring contact got lost..
so I had to open the mechanism entirely and carefully place the spring on that spherical ball.
check out how the spray assembly works.

Пікірлер: 431

@gogos869 2 ай бұрын

I just took off the hose and added a drop silicone to the nozzle it is attached to. I just went ahead and did it to every bottle I have. It works! Yippee!

@BabjiEManohar 2 ай бұрын

You are awesome 😎

@1vivi 24 күн бұрын

you saved my life

@amypola5903 11 ай бұрын

Seeing how the mechanism works was helpful. I can't take mine apart, the can is pressurized, and now I know the hollow tube that's broken on the outside, can't be pulled out from the outside and replaced. So I'm gonna have to Macgyver something to make it spray again. The can is 3/4 full!

@adeley27 2 жыл бұрын

Just put a needle through the hole where the little bead was. That is the end where the straw was attached. Test it out and see if it is started spraying. I did it and it worked out for me. Did not have to open the when thing. Thank you for the video 😊

@ice._.gyal. 2 жыл бұрын

Thank you so much... this way was so much easier and less complicated.

@stoppablepham6334 Жыл бұрын

I tried this just now and it works for me too, thanks for the tip!

@parul_s_panchal1553 Жыл бұрын

@Ad k it worked for me thanks for the tip 😊😊

@yamunas609 Жыл бұрын

It worked for me too! thanks

@allegrifan4933 Жыл бұрын

it works, thanks so much!!

@bjthomas66 2 жыл бұрын

I had never noticed the tiny ball! It was stuck, and even hot water didn't release it. But a shot of WD40 worked! Thank you for this video!

@adeley27 2 жыл бұрын

Thank you, because your comment I decided to stick a needle to loosen up the little bead, and it worked.

@mohammedsaleem6264 2 жыл бұрын

Thankyou soooo much ❤️❤️❤️❤️❤️ i cried when i broke my mom's bottle but now she is not angry ❤️❤️❤️❤️

@shinygracesanamandra2681 2 жыл бұрын

The pipe is falling into the bottle when i pump it it doesn't stay in place should i stick it with feviquick or what should I do please tell me

@dianegraves339 2 жыл бұрын

Thank you for this video. My bottle got knocked off of the counter and landed right on the nozzle without the cap on, and it wouldn’t work. It saved me from having to buy another product when this bottle was already full.

@ashoksamurai6409 3 жыл бұрын

It's working. Thanks much.

@Alex-vl4gu 3 жыл бұрын

Thanks for helping

@shivaniverma4266 3 жыл бұрын

This is insane I just lost that specifically shape transparent ball and find it and fixed that bottle thanx for uploading videos

@BabjiEManohar 3 жыл бұрын

Glad it's helping

@farminglovers7866 3 жыл бұрын

I also lost the small ball

@harshitmodgil9609 3 жыл бұрын

Thankyou sir It's working

@eggheadtwoSCM 4 күн бұрын

We got the exact same bottle this will 100% work

@joanna5200 3 жыл бұрын

I didn't even have to take it apart to your extent and it worked like a dream again. Thank you so much ❤️🙏

@loananzouakou4673 Жыл бұрын

how would you take it apart?

@joanna5200 Жыл бұрын

@@loananzouakou4673 if you watch the whole video, she did show how x

@djoy4ly 3 ай бұрын

Thank you for the very helpful video! I fixed the spray nozzle on my GLASS bottle! Yay!!!

@joealfonso4735 3 жыл бұрын

It works ..thanks

@ankitakhurana9090 2 жыл бұрын

I was about to throw away 2 bottles as the pump was not working, then found this video and yippee it worked. It's such a helpful video 👍👍

@shaymovieslol2748 2 жыл бұрын

WOW! THIS WORKS, I THOUGHT I HAD TO BUY A NEW ONE BUT KNOWING ME I’D FIND A WAY TO FIX IT. IT SPRAYS MORE MIST NOW! I’M LIKING THIS VIDEO!

@gaming30378 14 күн бұрын

Bt wht if it again don't work ??

@janelle2591 3 жыл бұрын

How to fix my spray bottle that gives out big drops instead of really small ones? I lost the small part that make the drops small. Please answer if you know what i mean

@opotumon Жыл бұрын

Superb. Thank you so much.

@adititiwari8274 2 жыл бұрын

Can you tell what to do if that little black circle is missing? What do we call it?

@uditpandey806 2 жыл бұрын

thank you so much ❤

@ayanprince4338 2 жыл бұрын

Thanks brother... It works

@BabjiEManohar 3 жыл бұрын

*Try to repair yourself first* , before buying new. It's plastic. Reuse. Save environment. *Yes, removing nozzle is hard.* Removing it went off the camera frame. Use a plier. Share & Save someone's life ❤️ only if you find it helpful. Clearly, some of you facing hard time removing the nozzle. Please be careful with this part because if you remove it harshly, there could be a transparent Spherical Ball drops off the nozzle assembly. If you lost the spherical ball, try any tiny round piece of pebble or ball bearings of more or less same size.

@a.praneetha1501 3 жыл бұрын

Thank you so much

@alekhyaprabhala3984 3 жыл бұрын

Make that missing part

@jhunusahu8061 2 жыл бұрын

If the ball is Missing then what to do pls make a video

@b06cristobalchristianp.56 2 жыл бұрын

Yes, I'm having a hard time on removing the nozzle and til now, I'm still there AHAHAHAHAHHA

@aparnaarpitadash9716 2 жыл бұрын

@@b06cristobalchristianp.56 Same

@kuleshwarsahu 2 жыл бұрын

Thank you so much Helped me a lot

@piyuthorat7685 2 жыл бұрын

Brilliant....I m actually very happy for you didn't throw that plastic bottle and by repairing you reused it.....otherwise 95% people just throw it...which makes so much garbage

@sh_ri_ni_th_i. 3 жыл бұрын

Wow most wanted video thanks

@pishhh 2 жыл бұрын

Can u pls tell me how to remove tht main part ..its so hard :(

@sanjana8716 2 жыл бұрын

Thankuhh somch ❤️ this video is very helpful 😉

@YuunAya 2 жыл бұрын

I was very happy I could find a tutorial like this! But unfortunately, it didn't work :( even using a plier I couldn't remove the nozzle... I'm definitely substituting my spray

@shaik119 Жыл бұрын

Same

@hamsapriya6933 Жыл бұрын

Thank you so much for this lovely hack! I couldn't remove the pump system but tried blowing on either ends of the pump assuming an air blockage and hola it worked! Thank you thank you thank you so much and thank God for everything!! 😊👍🏼

@hariharangopu513 Жыл бұрын

My friend, Mr. Raghavendra (Handsome guy) got an same issue. We saw your video luckily and we did dismantle and assembled all parts. Respect 100%. Mission passed 100%. LOL..Its working fine now..

@hariharangopu513 Жыл бұрын

Thanks for Raghav hard work and love towards KZfaq. 😍

@govindarao37 3 жыл бұрын

Good it's very useful

@rahulppazhani4601 2 жыл бұрын

Yes... It works... Thankyou

@VVS_Craftworks 2 жыл бұрын

Thank you so much🤝

@sijokxavier Жыл бұрын

Wow. Kudos. I just was doing 1 step wrong again and again. Anyways thanks a ton. Superb

@nusratvlog7975 2 жыл бұрын

i just done it today....and it’s work....thanks

@clairenime 2 жыл бұрын

Will definitely try after school my conditioning bottle suddenly stopped spraying

@mythily8103 2 жыл бұрын

Really awesome video.. I never notice the tiny ball. When spray bottle stuck I removed all parts of spray bottle but I didn't notice the tiny ball.. I think I have lossed it..after fix all parts without tiny ball it's didn't spray..after saw ur video I noticed tiny ball is missing now I fix using another tiny ball in spray bottle now it's spraying.. Thank you for sharing this video

@rolexcreations6753 2 жыл бұрын

Thanks bro ❤

@nausheenkhan1289 11 ай бұрын

Thanks for sharing 😊

@Pizza_eater001 Ай бұрын

So glad that u made this video Saved my day

@amanmehar05 7 ай бұрын

Thank you very much bro ❤🤩

@user-tk2ft8wf4y 4 ай бұрын

Thank you so much!

@Tk_s_CHANNEL 2 жыл бұрын

i cant fix that bottom to that pipe i triad so mamy times what i can do now??

@Karthiktime 4 ай бұрын

Thanks dude it helped me...👍👍👍

@BabjiEManohar 3 ай бұрын

Glad it helped

@shabanabegum8092 2 жыл бұрын

Ya it's work thank you 👍

@JaskaranSingh-oz5dn 7 ай бұрын

wow...vry helpful video

@Tamil_Status_Edit 5 ай бұрын

Thanks you its working

@adansisters8396 Жыл бұрын

This was so easy and help full thanks

@hacksvanshndivyanshi 3 жыл бұрын

Wow❤️

@sagarkundu4133 2 жыл бұрын

Thank you🙏

@genniegidney Жыл бұрын

My spray nozzle won’t spray. The mechanism is fine. I have another spray bottle I took the first cap off (it doesn’t fit the top but it allowed me to test. It’s just the cap part that’s clogged. I’m soaking in hot water. Idk how to get it to work. I’m trying but it’s like it’s stuck.

@donnacarraway9182 Жыл бұрын

Thank you!

@rizwanatyagi9964 Жыл бұрын

Thank you fir this video

@t2tmedia933 2 жыл бұрын

thnx it helped me a lot

@FreyaRuizables 3 жыл бұрын

So which part gets broken?

@harshvarshney5278 2 жыл бұрын

Thanks it works

@kaushiknaik4872 2 жыл бұрын

Ahh 3:00 AM content 🙂

@rajdangi9629 Жыл бұрын

Really its works, thanku

@aashishyadav5812 Жыл бұрын

I tried it's really working 😊

@rejithomas9976 3 жыл бұрын

Thank you

@BrandGamox 2 жыл бұрын

Thanks brother

@shaikthaseen740 2 жыл бұрын

Thank u so much

@PuriBabaPunjabi 2 жыл бұрын

Very nice 👌👌 helped alot

@reshmivishwanath5244 3 жыл бұрын

@Manohar plz help me I cannot remove the nozzle .please tell how to do it

@andymandy1975 2 жыл бұрын

Same even I'm unable to remove the nozzle

@priyankaagrwal249 Ай бұрын

Even I am unable to remove the nozzle...even in video it was skipped

@priyankaagrwal249 Ай бұрын

I wonder if comments are or not genuine

@swathibehara 2 жыл бұрын

Helpful

@dreamergirl4386 2 жыл бұрын

Can i re use sanitizer bottle to fill my homemade serum is it safe

@megarajvembarasi5480 20 күн бұрын

Thank you it's working

@BabjiEManohar 6 күн бұрын

You're welcome!

@artityagi6291 2 жыл бұрын

Thanks a ton

@ArtiKumari-ie8kx 9 ай бұрын

Thank u 100 times

@vivekjasrotia7247 3 жыл бұрын

Wonderful, I did nothing jut remove the parts and cleaned it and it works .Thank you so much..

@karuneshbaranwal 2 жыл бұрын

Thanks Edit: You are awesome.

@skullgammer6720 3 жыл бұрын

Bhai thank you mummy ki chapal se bacha liyaa yrr bhai love you se tane❤️👍🏻

@andymandy1975 2 жыл бұрын

Bhai nozzle nikal hi nahi raha 😰😢😖😖

@mahendrakhobare2921 2 жыл бұрын

It's amazing

@bluejeans712 2 жыл бұрын

this was helpful...i found out my spray bottle doesn't have the black rubber but has a lock to keep the nozzle and spring in place....i had to remove it bcoz it was too thick that prevents the spray from sucking water... thanks !

@harshitha8088 2 жыл бұрын

Can u please explain wht to do, if that black rubber is not there

@bluejeans712 2 жыл бұрын

@@harshitha8088 my bottle has a different design, i did not have the black rubber but in its place is a lock(white in color)... if you need a black rubber you have to find a something to take its place.or maybe your bottle is like mine.. disassemble it and find eahc piece that matches the one in the video. i figured out i do not need the lock(black rubber) after all

@reshmabanu8489 Ай бұрын

Thank u so Mach😊😊

@madhuuwee9287 2 жыл бұрын

Thank you soo much

@shyamp8134 2 жыл бұрын

Thanks a lot

@craxonff6468 2 жыл бұрын

Bhai wonderful

@sandipchaudhary7107 3 жыл бұрын

Thank you so much it's really helpful ☺️

@comi.d7873 5 ай бұрын

It was a struggle to take it apart but after a few sore fingers later I managed to fix it. Thank you for this helpful video. I now got a working bottle and new knowledge

@sapnasingh1217 3 жыл бұрын

i am not able to remove the parts

@vishnugowda9466 3 жыл бұрын

Wow super

@pranavagnihotri7030 2 ай бұрын

Thanks for the information,maza a gaya bro, ab new bottle kharidna nahi padegi❤🎉

@badisochkabadaprayas4880 3 жыл бұрын

Thanks

@shalugupta1432 2 жыл бұрын

I am unable to remove the spring, what can I do?

@MohammedHisham737 Жыл бұрын

How the hell do I remove the set 😖 I even tried to get it out with a cutting pair 😩 still that was stuck tho. Plss help

@vaishalimundhe1035 2 ай бұрын

Same with me

@sathikutty5071 3 жыл бұрын

It's sanitizer bottle nozzle Is joined type? What I do?

@GeorgeTheIndianFarmer 2 жыл бұрын

You have made a simple but useful Video on the subject. Also I like the animation as well. Good job. Keep it up.

@BabjiEManohar 2 жыл бұрын

Thank You 🙂

@hritikgautam5126 3 жыл бұрын

Bhai spray toh nikal raha h par andar se sanitizer bhi bahar aa raha h cap se please help, reply asap

@hazelboyce7230 Жыл бұрын

My two nozzles does not have in that little ball and they won’t work at all. Liquid is being pulled up but it isn’t getting to the actual nozzle to spray out. Nice video though, it is the only one that gave me hope.😂