this is the first time i see a fox flying with thermal! great.

ur model is pretty fine and stable as well!!

vous gére bien le modélisme chapeaux

Thanks you :) I glued in the wing a plastic tube and a carbon rod link the wings. The servo are glued too. Yes the little rods where is link the servo arm are glued and when I want to disassemble the wing I just put off the servo arm of the servo.

I's like to thank you. Build my own one yesterday. Due to lack of hills in Holland, I will take it up under a big plane and drop it like a parachutist.

great vid

very nice and simple way of conversion, I have done two and this type will be next as your set up is very sweet, thanks for sharing and happy landing!

Nice plane had the thought to mod it when it first came out. Power all the way for me .... but it is all in location no hills for updraft.

@mickeydetanneron Very well done! By the way, a "bubble of warm air" in English is called a "thermal". Take care, Rocky

Hi, thanks you very much for the comment :) So two servo of 3.7g each, a lipo 1S of 7.5g, a receiver of 7g and between the wing I use carbon tube of less 1g TOTAL : 3.7+3.7+7.5+7+1=22.4g with the polystyrene that I take of for put servo receveir and battery you have approximately : 61g (22.4+39=61.4 less the polystirene a final rc sailplane of 61g) I hope that I answer back of your question. Don't hesistate if ou ahve another question ;-)

Really great conversion! Is the wing centre section glued in, and the servos too? Are the servo arm CF rods glued into the wing panels? What is the material you use for the wing tube? I think this is the way to go in Fox conversions, really good job!

Thanks you so much!!! :)

Hi I'm really impressed by your creative work. I am about to try something similar and I wonder, what kind of akku you used. It must be a really light one :) Greetings Pascal

that is really cool how did it fly?

thanks you so much for your comment soon i gonna to post a video of an airplane that i completely imagine and it's gonna to be the first airplane that i gonna to sell in the firm that i'm creating

Thanks you so much for the com :) I love sailplane so for me it's not boring to fly with but maybe before the summer I gonna to increase the wingspan in order to have a better "sailflight" and if I'll do this I gonna to put an another video ;-)

Hi, I'm sorry but i put all photo that I taken during the making of on this video. Thank you so much for your com and if you have another question you can send to me message :)

Gutsy place for slope soaring. Nice flights.

I'm glad to see that I inspire you to create your own :) If you will made a video I'll gonna to watch it, it's a good idea to drop the fox with a bigger plane. Have nice fly ;)

Nice work, So 60g was AUW? The wind looked like about 18-20 mph- My FOX flyng wing had to be ballasted to 2.20 ounces to fly. Doug

Absolutly cool!! loveit :D

It fly very well but it's better with some wind for make long flight and if you want make some aerobatic just had 10 or 20g for more inertia

hey, you should stick the white plastic tube in the wings before you cut the wings, so you make sure that everything is aligned ;-)

I love the set up. do you have any more pictures showing the servo set up?

@rockyabq Thank you for the word ;) and in French is a thermique

Just had his maiden today. Just throwing it up in the air. Needed 75 expo. One of the servo's broke off after hard landing. I will put some extra foam between the servo's to make a stronger connection. Also talked to the dude with the biglift at the club. He was afraid the fox would disintegrate due to the strong airflow of the biglift. Next plan is to put it under a quadcopter and deploy it using a electromagnet and a servo-switch. Maiden next thursday. Will make movie

Thank you and landing good to you too ;)

Hi the main spr mesure approximatly 15 cm and I use a carbon tube for the weight and the cg is approxiamtively at 1/3 of the edge

@th3dud3007 thanks you for your comment :) The day of the video there wasn't strong wing I just put the glider in a buble of warm air ( lol I dont know the word in english) You see true the wings are holding by the servor arms. I have an another glider with pitcheron system and the two wings are holding by a rubber band : there is a hook under the eginning of each wing. lol I know for the carmeraman lol

nice make plane

Thanks you very much :D

@erlebnisraum Hi, thanks you :) I use an 80mAh lipo 1s

Wait you are not controlling elevator with the horizontal stabilizer just with pitcherons?

that is a mini version of the multiplex easystar

Hello great project can you explain how your system wing work?

How do you keep the wind halves from sliding on the rods away from the fuselage?

It is very impressive. I have buy a Fox. I have measured 46 gr for the plane. I remove the ball mass and it has 39 gr. If I have a good lecture of your video you have a final RC sailplane of 61 gr. 61 - 39 (the plane without ball mass) = 22 gr !!!! How did you do for having an electronic system of 22 gr. Have you an AM radio ? Can you measure the mass of each element please ! Can you tell me about the reference of those elements ! Thank you for your reply. Best regards. Aleksander M.

Hi, with a cutter

Where can we buy all kind that thing for make great it up ? Kind like remote control n motor n battery n body ?

hi, how did you cut the flaps? please help me.

Ah juste ca!

with rudder of the servo

yes :D

stick a 8000mah 3s lipo in there :D

Tu fais comment pour que les ailes tienne et ne se barre pas?

lol it's true!!!!!

lol :)

Hi I'm really impressed by your creative work. I am about to try something similar and I wonder, what kind of akku you used. It must be a really light one :) Greetings Pascal