How not to remove a Predator 212cc Governor

Рет қаралды 235,005

6 жыл бұрын

Today I show you how to remove the governor from a Predator 212cc engine. It is simple and should be similar on a predator 420cc and honda gx160 engine or similar engines.
One of the best mods you can do to the engine. And its free. And my Go kart flies!!
Do onsider subscribing If you are new to my channel!! Lots more awesome stuff on the way you all will love!!
PS.... I did not cover too much in detail but the video should still help. The (first hole) on top you can thread it and sink a bolt in. Or find a random bolt and weld it in like I did. I used an M6* 1.50
For the Second hole I Used an M10 * 1.0 bolt, loctited it in and welded the nut just to make sure.
If you are not sure what to do with the throttle linkage and carb after removing the governor check this video out: • How to add a return sp...
I did not mention it because I put a whole new carburetor on the engine.
*I used red regular gasket maker from walmart.
**If you have any problems with the cam falling out like mine did, or a problem with engine assembly, see: • Honda 6.5 HP Clone How...
Predator 212cc Engine - Amazon link: goo.gl/MiRULL
Mikuni carburetor: goo.gl/qyz1s8
(Go power sports has a complete kit for 90$)
Outro Song: • Elektronomia - Limitle...
I'm trying to reach 1000 subscribers. It's Possible!!
If you are new, Feel free to check out my content and subscribe. More to Come!! Stay tuned
Things I use (Non affiliate links):
●Editing software: Cyberlink Power Director
goo.gl/dGtpM7
●Main Cam 🎥 : Panasonic g7
goo.gl/w1qHH3
●Mic (Cheap and awesome)
goo.gl/ErV5xn

Пікірлер: 203

@VasilyBuilds 6 жыл бұрын

Sorry, my new videos are much better than this. I promise! *Just to clear up* My timing dots look disaligned, but were aligned. I had just given the pullstart a few yanks just to make sure everything clears. But 10 months later the block still runs fine to this day!!!

@Nickael7 5 жыл бұрын

Never use a steel hammer to take out the crankcase or other engine parts, you may crack the cover. When starting an engine put a wood plank underneath, never run an engine on a hard floor, you may crack the crankcase from the engine vibration.

@GGaievski 5 жыл бұрын

are you using the stock rod? i wanted to make a kart engine with my gx 160, but im afraid the rod will break

@jakechunasamy9642 3 жыл бұрын

Vasily Builds lmao I bought a 420cc preadator with my money and removed the governor and my neither helped me put it on my go kart

@scrapwire1 4 жыл бұрын

As a retired Machine tool mechanic of 48 years, now I'm building a cyclekart at age 65, I never grew up, I still love to go fast, I spent my life building and machining race engines, Never put the wrenches down, someone will always need someone that will get their hands dirty. I'm just changing the flywheel and rod so it doesn't blow up.

@donstemen2282 2 жыл бұрын

I’m 50yrs olds down every one around me is into hot rod cars and demolition derbies but I just can’t get away from the small engines

@luishuerta3890 4 жыл бұрын

That's very good to see a young kid ! Doing something to advance his knowledge!

@Nigelk388 5 жыл бұрын

Watching you work on this engine gave me pdsd

@VasilyBuilds 5 жыл бұрын

Your profile picture gave me pdsd

@Nigelk388 5 жыл бұрын

Haha

@VasilyBuilds 5 жыл бұрын

Haha jk :) my next rebuild video will be way better. this one is very cringy

@Nigelk388 5 жыл бұрын

Vasily Custom Builds I found this video useful I’m fitting a 212cc at the min on a go kart from the 70s new clutch new chain new engine and a lot of welding to make it fit.fun project for next few days jerry rigged the throttle gonna continue with that theme till it’s driving out the road

@anotherone9460 4 жыл бұрын

BLOODY KNUCKLES, this is graphic!!! Hardcore, dude. Thanks for the tutorial! It helped my solve what I did wrong haha!!!

@anotherone9460 4 жыл бұрын

Dat dam cam.

@crowtubecrozier2857 3 жыл бұрын

Not a bad video, a little scary at moments. Well done any how buddy!

@JasonExplainsThings 6 жыл бұрын

Good how to video dude!

@VasilyBuilds 6 жыл бұрын

Thanks man!!

@pomonabill220 6 жыл бұрын

or how NOT to!

@JBBRAD9267 2 жыл бұрын

In this video you were excited about 1k subssubscribers. Now over 300k. Amazing

@johnwick-ii6il 2 жыл бұрын

There is a washer on the governor shaft that appears to have fallen into the engine when you removed it. There is also a washer under that white part you pulled from the gov. gear, it can fall out if left in place.

@shagnasty115 6 жыл бұрын

Good job! And good luck to you young man

@CootersCarport 6 жыл бұрын

Nice Channel!

@VasilyBuilds 6 жыл бұрын

Cooters Carport Thank you!! this was when I was first starting out

@christianlopez9355 5 жыл бұрын

maybe ur not perfect but it works and u did it

@TEXASpatriot76 2 жыл бұрын

@Vasily builds. So on the 224 with a governor on I was able to get my mini bike to 42mph I just watched a video of someone taking theirs off and when the same speed. In your opinion what's the point bud?

@Customwinder1 6 жыл бұрын

Good job. I was thinking of doing the same on the 16 hp buggy I have.

@tommyrodriguez9683 2 жыл бұрын

I have a predator 212 with a stage 1 kit I remove only the governor after an hour or two of riding it shuts off and have to wait like 5 minutes to cool down and it'll turn back on you think I would have to remove the governor sensor

@dacubbison1 3 жыл бұрын

I removed the governer and arm, now it runs at wide open throttle. Ive checked for air leaks and everything with brake clean to no avail. What am i missing here ? I cant find any solutions online.

@rizalsaputra3718 4 жыл бұрын

From Indonesia What product connections do you use with the carburetor ???

@heavystarch100 4 жыл бұрын

Imma keep my oil sensor! One of the features I like!

@VasilyBuilds 4 жыл бұрын

If your drifting or doing donuts it's going to cutoff the engine

@kbaxtre9290 3 жыл бұрын

my cam fell out and these 2 longs things thats right next to the cam fall down i put them back and and lines my cam up and put the caseing back on and my bike is feeling easy to pull then it sound like it has low compression by the way its a new 212 any suggestion????

@tacojohn69j 2 жыл бұрын

Your rockers fell off the valves when your camshaft fell out.

@PunkCoverMoose 3 жыл бұрын

Thanks for making this man. Have you ever noticed a small rattle in an empty 212 fuel tank? After I put mine back on after removing the Governor, something’s seems to rattle a little when I tilt the engine. It doesn’t seem to roll much but I can’t figure out what it is

@kbaxtre9290 3 жыл бұрын

do it start?

@Everlastandgreen 2 жыл бұрын

You probably left something inside. You do need upgrades inside your engine if you want to make it go faster. Super man cam, billet rod, flywheel.

@juanlamas5605 4 жыл бұрын

How do you hook up the carb cable after removing all that stuff. On the stock carb though

@bretmontgomery794 4 жыл бұрын

@Juan Lamas u can ether use a top plate from gopowersports.com or get creative with the rod from the govenor arm to give throttle

@juanlamas5605 4 жыл бұрын

Thank you. I ended up modifying the throttle lever. To directly control the carb. I put the return spring on the bracket wear the governer use to be.

@Everlastandgreen 2 жыл бұрын

Buy a 40in throttle cable and buy a vm22 mikuni carberator. Both can be bought on amazon. KZfaq videos on how to install them. Black66 makes a good mikuni carb video. This will also make you go way faster

@romeo032982 3 жыл бұрын

It would have been smart to record to more Important parts IE: the removal of the eclip on the white gear and the removal of the oil sensor

@guy_incognito7538 6 жыл бұрын

I just zip tied the spring from the throttle arm to the governor arm and adjusted the top speed using the limit screw... it’s not much higher in rpms than stock... any problems with this?

@VasilyBuilds 6 жыл бұрын

Use a heavier spring

@alexanderautiero4986 6 жыл бұрын

Wiggle the cover off to not rip the gasket

@dandufour116 5 жыл бұрын

mikuni carb with stock internals? Can you do that somewhat safely?

@VasilyBuilds 5 жыл бұрын

Yes. Its only when you are getting heavier springs

@kiwiJetsurf Жыл бұрын

When you add the mikuni carb does it stop the governor from working? or do i still have to do this?

@VasilyBuilds Жыл бұрын

it does.

@themagicloaf8327 4 жыл бұрын

Ok so I just removed the governor on my tecumseh powersport 6hp and when I start it the engine runs by itself and doesn't stop? I connected the throttle directly with a metal wire but that didn't do anything still? What do I need to do?

@andrewsavage1872 4 жыл бұрын

Diygokartforums and post pictures. I'd bet you have some linkage wrong or the cable hooked up wrong.

@beastnsuwoop9974 5 жыл бұрын

I took that govenor pin out cut it then put it back in leaving the linkages and took the govenor out.left the oil sensor in there just incase I needed to return it for warranty purposes. (They will never know)

@tavocarrillo7183 3 жыл бұрын

So I am suppose to remove the little governor arm caused I watched your other video and my engine really isn’t running the best

@achochong3647 5 жыл бұрын

thanks

@84baggedchevy 4 жыл бұрын

I'm sending prayers for your entire Jerry rigged motor

@corysatterfield7570 4 жыл бұрын

Whys it rigged bro? Cruz u can't do it? Stfu

@stinkymans5002 5 жыл бұрын

Vasily Custom Builds I did this and I’m confused on how to re hook up the throttle without the arm. Help

@redearedslider321 5 жыл бұрын

Did you figure it out ?

@chriscapello7423 3 жыл бұрын

It hooks up directly into the carb.if you look at the top, there is a black rubber boot it goes through. There is a cylinder with a slot that the cable hooks into. When you hit the throttle to go, it lifts that cylinder that has a needle at the bottom that comes up with it and opens full flow

@flip_flop_farmer 4 жыл бұрын

i did this now i have no compression and it wont start i think it has to do with the 2 round valve things that go up and down do they have to b in a certain position and i lined the dot up with the other dot

@kbaxtre9290 3 жыл бұрын

yo did you fix it caue mines having that problem?

@propabilityfpv303 5 жыл бұрын

What do you thing the chances of bending a port or something would be? I'm thinking about doing it on my razor Vespa gas conversion but I don't wanna damage my expensive brand new engine by over-revving it

@VasilyBuilds 5 жыл бұрын

thing that would go first is the rod. Not sure what type of engine you have, predator 212 can go up to 7000 safely with stock everything

@propabilityfpv303 5 жыл бұрын

@@VasilyBuilds yeah I got the 212 it's stock except for a carb I pulled off a briggs that seems to run better during the winter (runs too lean in the winter with the stock carb so I just swap them out) I guess I just have PTSD from my lawn mower vertical conversion that I removed the governor from and it threw a rod (jug looked fine) but i got so scared from it that I didn't work on 4 strokes for a good year or so other than lawn equipment

@propabilityfpv303 5 жыл бұрын

@@VasilyBuilds but anyway ive been watching your videos for a while just never thought to sub till a few weeks ago. Really enjoying the good content keep it up bro!

@joeytm____133 Жыл бұрын

Do you have to tourque the bolts

@gabrielgalaxygh 4 жыл бұрын

Will it blow faster since flywheel is plastic? My only worry

@wm565 4 жыл бұрын

Only the fan is plastic. The flywheel itself is cast iron,

@spikemandan 6 жыл бұрын

@5:00 you dont weld steel to aluminium you dip dizzy swizzle just saying

@gt20modding88 6 жыл бұрын

Tap and put a bolt in the hole numb nuts.

@masonm255 4 жыл бұрын

@@gt20modding88 Relax dude, guys like 16, no need to be a dick

@erikkaliang6855 6 жыл бұрын

you have vidio tutorial change carburetor mikuni 24MM for to honda gx270/340,???? I from indonesia,

@VasilyBuilds 6 жыл бұрын

No :(

@erikkaliang6855 6 жыл бұрын

Vasily Custom Builds ok,thanks...☺

@ericwang4763 5 жыл бұрын

You add anything like 18lb springs or aluminum flywheel?

@VasilyBuilds 5 жыл бұрын

I added 18lb springs in a later video

@ericwang4763 5 жыл бұрын

@@VasilyBuilds Where'd you get them?

@VasilyBuilds 5 жыл бұрын

gopowersports.

@dustinlee9995 Жыл бұрын

What's top speed after u remove the governor

@caspertv753 3 жыл бұрын

What kind of new carburetor is that

@morganhill1238 6 жыл бұрын

great comedy...ty

@VasilyBuilds 6 жыл бұрын

haha. I've grown up since

@yemyesil28 6 жыл бұрын

Educational

@dereckschmit6127 6 жыл бұрын

what is your carburator

@VasilyBuilds 6 жыл бұрын

Mikuni vm22

@devonhill8127 3 жыл бұрын

You could of just tapped the governor arm hole with a 1/4 20 tapper then put a 1/4 and 1in bolt then put some red lock tight. But either or works

@GratefulEd907 2 жыл бұрын

A tap only cost about $5

@Jax0238 3 жыл бұрын

Welding mild steel bolts to an aluminum case....what could go wrong? hahahahaha

@jessicacordova5024 3 жыл бұрын

That’s what I was thinking would’ve been much better to just tap it and thread in a bolt or a fitting to use it as a vent tube.

@christianlopez9355 5 жыл бұрын

good job man

@VasilyBuilds 5 жыл бұрын

Thanks!

@zacharylewis4860 4 жыл бұрын

hey man , we took the governor out and the engine seems to be running not correctly, the go kart is spurting some smoke and the engine doesnt seem the be revving at the rpms that it was before(the go karts really slow). where did we fuck up pls help

@loufernando7617 2 жыл бұрын

Did that now feels like I have to much compression and hard to pull n won't start

@Mini2vista 3 жыл бұрын

I did this and when I try to pull start there’s like a lot of pressure??

@sterilesongs6442 3 жыл бұрын

This is because its hydrolocked...just remove the sparkplug and pull the cord a couple times to get the oil out of the cylinder.

@sterilesongs6442 3 жыл бұрын

Btw sorry if this info is late....

@CameraPonselChannel 5 жыл бұрын

Stock rod?

@andrewsavage1872 4 жыл бұрын

Yes, and it works just fine.

@GratefulEd907 2 жыл бұрын

A tap is only like $5. You could have tapped those holes and then just put a bolt in with some lock tight.

@gangstarsnowman7773 3 жыл бұрын

okay the thing is you didn't have to open up the engine you bypassed the governor with the new carb

@theofficialvayne0420 2 жыл бұрын

That's not how that works

@gangstarsnowman7773 2 жыл бұрын

@@theofficialvayne0420 oh really? Care to explain why you think that's not how it works.

@theofficialvayne0420 2 жыл бұрын

@@gangstarsnowman7773 Having a new carburator doesn't just bypass the governor, the only way to actually bypass the governor is by removing it.

@gangstarsnowman7773 2 жыл бұрын

@@theofficialvayne0420 that is completely false the governor works by limiting the throttle input. As the engine gets to too high in the rpm range the governor arm pulls back on the throttle arm. That's why when people bypass the governor they either zip tie the spring so the arm can't pull back or they set the linkage directly to the throttle arm and not the governor arm. By putting a new carb on the engine you have a separate throttle setup which bypasses the old one. There is no governor arm to pull back on the throttle to govern the engine. kzfaq.info/get/bejne/gb50eMmKmM3Top8.html

@kiwiJetsurf Жыл бұрын

So if i use mikuni carb i dont have to do this?

@megametal9034 3 жыл бұрын

Could you put a caption in Portuguese? I give more value to the project of these people out there

@insanbiasa5035 5 жыл бұрын

👍top

@RR-cl3et 5 жыл бұрын

Top

@shannonshull6989 6 жыл бұрын

Welded a steel bolt into an aluminum block? Hmmm.

@VasilyBuilds 6 жыл бұрын

shannon shull 🤣🤣 #itwillbefine

@JayGraphix 6 жыл бұрын

LMAO ... Nice ... duct tape or Elmers glue woulda been better ... bubble gum ... He's a young guy ... but at least he is having fun and learning. Great video!

@groomlake51 6 жыл бұрын

Lmao my first thought!! You actually welded a steel bolt to a aluminum case🤣🤣🤣holy shit bat man it works!! I’m trying to build a cheater 212 for my sons gokart for a practice engine. He is running box stock brigs that I can’t put To manny laps on!! I have found out to leave the second ring out of the piston between the oil ring and the compression ring. It frees the motor up and don’t even burn any oil

@josephatnip2398 6 жыл бұрын

I would have just tap the hole installed a bolt and use some Loctite but hell you could have probably just sealed it up with J-B Weld

@Nickael7 5 жыл бұрын

@@VasilyBuilds You could had filled the hole with epoxy glue or with some JB weld.

@Sahidali-xx1ki 3 жыл бұрын

How much carboreter sit and menifold

@bryanmcpherson3576 5 жыл бұрын

Is it the same on the 8 horse 302

@VasilyBuilds 5 жыл бұрын

Bryan Mcpherson little different exhaust flange. But pretty much the same

@AxelReyes-bl9fz 2 жыл бұрын

What a mess friend.😄😄😄👍🇺🇸

@johnfloyd2551 Жыл бұрын

Next time use ultra grey or ultra black rtv sealer...

@faroukabd5293 6 жыл бұрын

nice demonstration thank s

@candelariohc 4 жыл бұрын

All I had to do was take a screw off and I’m going bout 45mph

@joecampbell7171 4 жыл бұрын

What did you change

@josepena2024 4 жыл бұрын

liar

@candelariohc 4 жыл бұрын

It’s a screw wear the throttle arm is that limits it just take it off and your zooming

@marksantucci4180 3 жыл бұрын

That what I did but there's much more with the governor off , dare you tap the power lol

@saavedravideos258 5 жыл бұрын

I like how they say it’s free but if you mess it up it’s not free any longer 😂

@Ram-re5em 5 жыл бұрын

I work on engines on my bench made of wood not on the ground with concrete. Home deport for a screw?

@staggerproof5589 4 жыл бұрын

Uh, if you are installing the Mikuni, none of the governor linkage connects to it, so you don't need to go inside to remove the governor.

@fever4174 4 жыл бұрын

Bernard Allan I made this mistake. I thought it would be fine but it always keeps the engine at idle speeds so you need to take it out actually

@johndeesfpv9289 Жыл бұрын

you can get the governor arm out without cutting it , i just did it lol

@zachlamanske5363 4 жыл бұрын

Dude you didn’t put your cam shaft back in right bro!!!!!!

@VasilyBuilds 4 жыл бұрын

You not read the very first comment?

@adariushickmon293 Жыл бұрын

That’s what I need too do is remove my governor but my brother in law won’t do it for some reason

@justinrectenwald5647 5 жыл бұрын

Do you half to move the oil censor

@BraydenBarlow 5 жыл бұрын

@andrewsavage1872 4 жыл бұрын

But you do need to disconnect it at the wire if it's on a kart or mini bike, the oil sloshing will tell it the oil is low and kill the engine.

@ashton6478 5 жыл бұрын

Why make a how to video if you didn’t even record the thing you were making the how to video on

@bdog7262 4 жыл бұрын

Ahhhh. I will never get those couple minutes back. Damn bro

@shepherdricks55 3 жыл бұрын

I wouldn’t take “all this throttle crap off your throttle might get stuck and you’ll have no way of stopping

@dylanweldon1363 5 жыл бұрын

I know this is a old vid but you forgot to take the washer out from the arm

@VasilyBuilds 5 жыл бұрын

no, otherwise I would've felt it tearing my engine apart

@dylanweldon1363 5 жыл бұрын

@@VasilyBuilds it's held on by grease you have to take it off it doesn't fall off like the other omes

@abhvgas 6 жыл бұрын

lol what are you doing welding aluminum to steel. kids dont do this at home, tap the hole, then put screw in with loctite.

@VasilyBuilds 6 жыл бұрын

Looking back, that was kinda stupid :/

@EFLO3D 5 жыл бұрын

NPT pipe threaded plug.

@liveandletlive2894 5 жыл бұрын

I dont understand the mistake anyone care to explain

@andrewt9204 5 жыл бұрын

@@liveandletlive2894 You can't weld steel to aluminum. Well, not with a good hold, the aluminum tends to burn away before the steel will melt. The bolt was steel, the engine block is aluminium. Like he said, tapping the hole is the only good solution here.

@liveandletlive2894 5 жыл бұрын

@@andrewt9204 thanks for the reply!

@sammyrothrock6981 5 жыл бұрын

You dont have to totally remove governer inside engine there are many of good you tube videos put there on how to just pull a few springs off and eliminate and reroute

@VasilyBuilds 5 жыл бұрын

Right

@fafajr1989 6 жыл бұрын

do u have a link to the carb you have in the video

@VasilyBuilds 6 жыл бұрын

www.ebay.com/itm/Mikuni-VM22-Carburetor-Fits-Honda-CB125-CB125S-CG125-125cc-Dirt-Bike-Carb/263279206085?hash=item3d4ca9dec5:g:6TIAAOSwCi9ZwKGR

@zanecrocker9091 5 жыл бұрын

Pls tell me internals are stock 🤞🏻

@VasilyBuilds 5 жыл бұрын

Yessir

@jigsgarcia5852 6 жыл бұрын

Do not run the engine in a solid concrete put some rag under it to absorb the vibration.

@VasilyBuilds 6 жыл бұрын

WIll keep that in mind

@Snailmailtrucker 5 жыл бұрын

Let me see if I got this right.... You TITLED your Video "Predator 212cc Governor Removal" and you didn't actually show yourself Removing the Governor ! I call that a FAIL ....but, you're young and and your head seems to be screwed on right ! Glad your engine runs !

@RustyHondas 3 жыл бұрын

Not anymore lol

@phillipflickinger5852 4 жыл бұрын

Sorry engine you had to go through this you should have the dignity of no oil death.

@scor440 3 жыл бұрын

Why take the governor wheel off you took the arm off

@VasilyBuilds 3 жыл бұрын

Mo PoWaH BaByY

@zubairjutt4292 4 жыл бұрын

Bro i same work in saudi arabia

@utuhkacipikdianggaluh9254 6 жыл бұрын

👍👍🔝

@user-rh4ul9sw9v 4 жыл бұрын

I want to do this but I’m scared I’m gonna throw the rod.

@masonm255 4 жыл бұрын

Same

@masonm255 4 жыл бұрын

But it's too late for that now

@user-rh4ul9sw9v 4 жыл бұрын

Mason M you threw a rod? That sucks bro

@masonm255 4 жыл бұрын

Giants 212 nah nah but I removed my governor whilst still using stock internals and flywheel. Only upgrade is 18 pound springs

@user-rh4ul9sw9v 4 жыл бұрын

Mason M oh, good to hear you might want stage two tho.

@MAHESA12345 4 жыл бұрын

Emang bisa gk fake governor'

@marcospineda1128 4 жыл бұрын

🥴😴😴😴😴

@bajaspacebandit6127 3 жыл бұрын

My Engine won’t start after doing this

@aidentayes941 3 жыл бұрын

Did you mess with the cam shaft

@bajaspacebandit6127 3 жыл бұрын

Aiden update I did mess with the cam I pulled everything out of the block to properly remove the governor. The reason I couldn’t get it started was there was some water in the gas tank and I didn’t notice so I just sprayed starter fluid in the carb and it started right up

@user-dg8zb1dy8c 9 ай бұрын

Puts a video on how to remove governor but doesn’t record it lok

@amaillo 6 жыл бұрын

Dude I recomend you to not disassembly any motor anymore, ever! You almost destroy it. Before starting to mod engines, please take some basic lessons. Also, if you reassembly it without gasket, like you did, you must take care of clearance for the crankshaft axis. That's not a good practice.

@VasilyBuilds 6 жыл бұрын

I assembled it correctly and the engine still runs great to this day.

@robspear03 6 жыл бұрын

Adrián Maillo Ya know how you learn small engine repair? Tearing apart small engines. Idiot.

@Deucealive75 6 жыл бұрын

Engine may have enough crankshaft end play to begin with which may be why you could get away with using RTV to seal up the side cover. Easy enough to check once the side cover is bolted down. As long as there is some end play it should be fine.

@patrickr3400 6 жыл бұрын

Where's your videos Mr.Expert.

@obs.joshhh 4 жыл бұрын

your an idiot

@butterbagelgaming3654 5 жыл бұрын

6:10 *starts the engine on the concrete*

@ashleymcdaniel1301 5 жыл бұрын

Busch league.. smh

@mattcat1148 2 жыл бұрын

212 dislikes 🤣🤣🤣

@sanesaint8725 3 жыл бұрын

Don't do it unless you don't open it up for more than a minute it will die you can't red line for more than a minute you have to let off the gas as I pass you

@tommyrodriguez9683 4 жыл бұрын

You didn't show anything thanks for wasting my time

@corysatterfield7570 4 жыл бұрын

F off loser

@claytonblanchard4451 4 жыл бұрын

Why not just disconnect it? Like I did. No reason to open the case. Welded a steel bolt to an aluminum case? Yeah, right. Before you teach, first learn.