How To Add A 12V Fuel Pump To A Predator 670

Рет қаралды 6,575

Күн бұрын

How To Add A 12V Fuel Pump To A Predator 670
Want to be part of our awesome community?
Join our Facebook Group: / thewashnation
Get the best CRM for your business
Try Markate for FREE for 14 days with this link: www.markate.com/?aff=jmesser
Do you want to increase your sales?
Here is a great deal on Yard Signs: lddy.no/10e91
12V Fuel Pump
Bravex Inline Electric Fuel Pump Universal DC 12V Low Pressure 2.5-4 PSI Petrol Diesel (EP12S) amzn.to/3LVCB0p

Пікірлер: 23

@michaelkleckner3007 Жыл бұрын

Did you remove the pulse pump altogether then and if so what did you do with the line from the manifold...plug it?

@KentuckyWashPros 10 ай бұрын

No I left the pulse pump in line.

@johnmunyan1701 Жыл бұрын

Just curious how the fuel pump works for you. I was considering on get the 670 for my build. I have seen before guys changing out the filter with a Honda filter when they first get the engine. I just got an envirospec pump tsg8040 in a 1inch gear drive that does 7.8 gpm bout 3500 psi is what I was told. So my next consideration was the crx680 but it's 19hp n not sure if I ll get the 3500. I got the pump but waiting on getting the motor til I get some more money in. Hondas are through the roof $$$. Right now I can't afford a Honda. Good luck with it, keep us updated.

@KentuckyWashPros Жыл бұрын

Spend the money and get the Honda IMO. I'd get the CRX 680 over the Predator. There is a link to the fuel pump I used in the description.

@johnmunyan1701 Жыл бұрын

@@KentuckyWashPros Yea bro I am gonna get the 680 from small engine warehouse $1099. + 119.00 for shipping. Thanks and good luck

@coltensawyer6761 4 ай бұрын

Hey so I have the motor siting in the box with the factory filter on it. What size fuel line is it ? Quarter seems small to me is it 5/16?

@KentuckyWashPros 4 ай бұрын

Yes it needs a 5/16” fuel line

@putpressureonem 6 ай бұрын

Did this work for you, I am having an issue with my predator 670, I changed the pump to the Briggs and Stratton pump and I can only use my pressure washer for about 20 minutes and then I get a no crank no start. Is there some sort of safety feature on the engine why this is happening.

@KentuckyWashPros 6 ай бұрын

It has worked perfectly for the last 8 months for me and still going strong.

@coff2x508 6 ай бұрын

I purchased the Predator 670 I need to purchase the 8gpm & gear is the shaft on the left or right side

@KentuckyWashPros 6 ай бұрын

www.pressurewasherky.us/product/8-gpm-belt-drive-skid-build-kit/

@realsthvac7942 8 ай бұрын

Do you need to remove the pusle pump to use a fuel pump?

@KentuckyWashPros 8 ай бұрын

Nope just add it in line

@BJMolette Жыл бұрын

Any Updates??

@KentuckyWashPros Жыл бұрын

Everything is running good, so far no issues

@zoski9423 2 ай бұрын

Will it eventually flood the carb?

@countchungalitus7604 2 ай бұрын

good question! personally, I put in a 2 PSI regulator inline. Ran for 65 hours so far and it's going great.

@KentuckyWashPros 2 ай бұрын

These are a low flow fuel pump. I’ve never flooded the carb

@seattleprowash5464 Жыл бұрын

Why are you doing this?

@KentuckyWashPros Жыл бұрын

It’s starving for fuel. It would run 10-15 mins then shut off, I would have to go squeeze the prime bulb I put on it 2-3 times and it would fire back up and do it again. So I swapped it to a 12v fuel pump and haven’t had any issues so far.

@seattleprowash5464 Жыл бұрын

@@KentuckyWashPros did you consider swapping fuel pumps ? I had a similar issue with my CRX and examined all the fuel lines and found they were kinked slightly near the fuel pump. I like your fix though if it works great idea

@KentuckyWashPros Жыл бұрын

@@seattleprowash5464 the fuel pump has been switched previously. I may need to check the fuels lines behind the plastic

@countchungalitus7604 2 ай бұрын

@@seattleprowash5464it's a known issue specifically with the 670. super weak pump compared to what to needs. Easiest fix is adding the inline pump.