How to Add More Oil Pressure to a Stock Oil pump | D16Y8 Turbo build | Part 4
Рет қаралды 1,516
2 жыл бұрынThe procedure is pretty simple! The materials I used were
-Dremel & bits
- 320 grit sand paper
-Drill (optional)
-spare 2mm washers
This method has been proven to work, I’m not the first person to do this many people have done this trick before. It’s just a lot cheaper then buying a race oil pump.
www.google.ca/aclk?sa=L&ai=DC...
@abeast9811 2 жыл бұрын
Love the vids
@smallenginekid6252 2 жыл бұрын
Thanks !
@GTRliffe 10 ай бұрын
shimming doesn’t help oil pumps that bleed into the gears. you will cavitate
@dougqick 4 ай бұрын
i added one washer to my oil pump and it ended with spun bearings from loss of oil pressure and everything was still tight on pump never again will i shim the oil pump
@smallenginekid6252 3 ай бұрын
You didn’t clean it properly or then. I ran this never had an issue.
MOONCAKE FACTORY
Рет қаралды 19 МЛН
Banjo Built
Рет қаралды 2,2 М.
BLUE OVAL DUDE
Рет қаралды 19 М.
Barbas Life
Рет қаралды 6 М.
Top Moments Films
Рет қаралды 3,1 МЛН
Сельхоз Ростовский 761
Рет қаралды 1,6 МЛН