How to add the NEW Juniper vEX Switch to EVE-NG (vJunos)
Рет қаралды 7,228
Жыл бұрынIn this video I show you how to add the new vJunos switch from Juniper to EVE-NG. This switch is also known as the vEX as it is essentially the virtual EX switch appliance.
NOTE: Your EVE-NG VM must being running software version 5.0 or later to add this device to your lab.
Enjoy and subscribe!
Use the link below to download your copy of the vJunos switch:
www.juniper.net/us/en/dm/vjun...
@mattlane1573 11 ай бұрын
Just discovered your channel whilst studying for the JNCIA, awesome content
@jongreenit 11 ай бұрын
Nice, happy labbing!
@SirNigel85 9 ай бұрын
Helpful as always. Thanks Jon.
@choi3759 Жыл бұрын
Thanks a lot! You are a good juniper influencer
@jongreenit Жыл бұрын
I appreciate that
@bph3649 Жыл бұрын
Please pay attention,his eve-ng is Pro version so he does not need to do anything else rather than put the image inside a folder in qemu directory.If you use eve-ng community version you have to install git,then update the the template inside the /opt/unetlab/html/templates directory then you will see EX switch in your inventory list.
@jongreenit Жыл бұрын
Thanks for sharing this tip
@priviledgekasambira1157 Жыл бұрын
@@bph3649,can you do a video on this for community version?
@jongreenit Жыл бұрын
@@priviledgekasambira1157 sure thing
@radouanebrahmi8325 9 ай бұрын
Please more explanation, what do you mean by git ? what is it, hwo can i get it, thanks
@hamzadrif1356 10 ай бұрын
First of all, I would like to thank you for this explanation and this excellent video. I would simply like to suggest that you include the download links for the vjunos image in the video description and share it via a link on a drive to make access to the image easier. Thank you again :)
@jongreenit 10 ай бұрын
Hi @hamzadrif1356, thanks for the feedback and I'm glad you for the video helpful. Post reading this comment I've updated the video description with the Juniper link. Unfortunately I personally am unable to redistribute this image via a sharable link due to legal reasons.
@JustCuz... Жыл бұрын
Don't talk about me and my rock lol... Awesome vid perusal 😊
@jongreenit Жыл бұрын
Haha I’m a few weeks late myself, don’t take it personally
@mtnsolutions 9 ай бұрын
Very funny…“ unless you’ve been living under a rock,“ you say…. I’m not under a rock, but close…Seoul. And primarily trained in Cisco but have my JNCIA. Been looking to make Juniper my main focus for a while. I love the programmability they offer
@jongreenit 9 ай бұрын
Haha… expanding familiarity with different vendors is always good. The cli of Juniper can be a learning curve at first but it’s nice to know the command line interface was built with automation in mind
@pooter4e552 Ай бұрын
Great video man! I'm moving from doing Cisco for the last 13yrs to Juniper these last few days. I took a position supporting the government and everything we deploy is Juniper. I need to pickup the basic syntax and start working on VXLAN Mist, but not sure if this switch supports it.
@jongreenit Ай бұрын
Nice, glad to hear your you enjoyed the video. So the vEx is supported in Mist however Mist won't allow you to configure a evpn fabric using this device even though vxlan is supported. So this function may come in the future.
@ranjithkumarmadhu8193 Жыл бұрын
My EVE-NG version is 5.0.1-13-Community I followed your steps to set junos-vsrx3-x86-64-21.3R1.9.qcow2 successfully. But vjunos-switch-23.1R1.8.qcow2 just won't appear as an option in my LAB add new node page. please clarify my query
@jongreenit Жыл бұрын
Hi Ran, it looks like there's a small difference between installing this new image on the community addition vs installing it on the EVE-NG pro addition. In this video, I used the pro version to perform this process. Putting together soon for the community addition version.
@terrylwilliams Жыл бұрын
I've been seeing conflicting reports. Does your eve-ng have to be a bare-bones install or can your use the switch on a eve-ng installation within ESXI. I read it had to be on a bare-bones because of the nested vm, within a vm x 2 or 3.
@jongreenit Жыл бұрын
As long as your pc CPU supports virtualization within virtualization you should be good. I’m running this image on a VM using VMware workstation on windows.
@sajiby2k 10 ай бұрын
@@jongreenitAre you running baremetal? I am seeing the vm goes to boot loop because this. Juniper also say that they do not allow to run the vm without baremetal. How you are doing this under vmware workstation?
@tonythomas8173 Ай бұрын
Do you have any options to have Juniper Mist cloud for vEx switches to test in Eve-ng
@jongreenit Ай бұрын
Yes so as long as you provide internet access to the vEX switches within your EVE-NG lab you can successfully discover them within the Mist cloud. They should show up as a EX9214 switch.
@tomtebloss89 6 ай бұрын
When I boot up the vEX and in shell trying to enter cli by the command 'cli' i get the error message: "could not open user interface connection: management daemon not responding" any idea?
@jongreenit 6 ай бұрын
Sometimes this can be due to the device not done loading all the way up yet but if you're still encountering this issue try "right clicking" the device and selecting "wipe node" and then click "start" to boot the device or just add a new node to your lab environment. Let me know if this helps
@Ryan.C24 Жыл бұрын
I follow your steps, but finally execute "/opt/unetlab/wrappers/unl_wrapper -a fixpermissions" on EVE-NG The system did not respond with any messages. Even so, I log in to web eve-ng and create a new node, but I still can't see the vjunos option. Reinstalled EVE-NG checked every step but can't solve the problem...
@jongreenit Жыл бұрын
If you logout of your EVE-NG lab, what version you’re running
@Ryan.C24 Жыл бұрын
@@jongreenit My EVE-NG version is 5.0.1-19-Community I followed your steps to set junos-vsrx3-x86-64-21.3R1.9.qcow2 successfully. But vjunos-switch-23.1R1.8.qcow2 just won't appear as an option in my LAB add new node page. The only difference is when the verification command is executed on eve-ng I don't see "check state valid"
@jongreenit Жыл бұрын
@@Ryan.C24 Hi Ryan it looks like there's a slight difference between installing this image on the community version vs installing it on the pro version of EVE-NG. Putting together a tutorial soon.
@iamsri9265 7 ай бұрын
Added device in eve-ng . But failed to reach the device due to high packet loss. Some times it work but fails most. Do you know cause of the issue.? Appreciate your help.
@jongreenit 7 ай бұрын
I know the vEX device is a very resource intensive device. Check your computers utilization using task manager when running the device.
@muhammadalimilah 6 ай бұрын
Hai does need bare metal server or virtual server for running the EVE-NG ?
@jongreenit 6 ай бұрын
You can run either, however you get better performance from EVE-BG by using a bare metal server
@mtnsolutions 9 ай бұрын
also..followed this vid t oa T and the switch doesn't pop up in the drop down list on EVE. running 23.2R1.14 community. any thoughts?
@jongreenit 9 ай бұрын
Yes, this is a known issue in this video I was using the pro version of EVE-NG. Checkout this on for the community edition: New vJunos Switch (vEX) not showing up in EVE-NG kzfaq.info/get/bejne/rdagYNGp06e6f2g.html
@jongreenit 9 ай бұрын
Your EVE-NG templates need to be updated
@campsputra1255 Жыл бұрын
Hi sir, i used eve-ng version 5.0.19 and install in GCP, but when running vjunosswitch/vEX interface can't come up,,, can help me?
@jongreenit Жыл бұрын
Hey Camps, what error do you get when starting the device?
@campsputra1255 Жыл бұрын
@@jongreenit interface not showing, and status fpc absent/offline
@campsputra1255 Жыл бұрын
@@jongreenit can you share fix image for vEX and include template vjunoswitch to email
@jongreenit Жыл бұрын
@@campsputra1255 Unfortunately I haven't tested using this image on GCP platform are you using the community version or EVE-NG pro?
@sergiot2014 Жыл бұрын
what telnet client are you using? Also when i started my junos switch I do not even get to the "root>" part for me to enter commands. You have any idea or help to point me in the right direction.
@jongreenit Жыл бұрын
Hi Sergio, still having issues? What prompt do you see when you start the device?
@sergiot2014 Жыл бұрын
@@jongreenit I'm good to go. A little bit of research and found the answers. Could you do a video on how to use superputtybin eve Ng by chance?
@sergiot2014 Жыл бұрын
Hi so that unl_wrapper command -a fixpermissions command. When i entered that in my eveng VM I didnt get a message that said "online check state valid."
@patzferrera8371 Жыл бұрын
Hi Sergio, I am experiencing the same. Instead of getting to root>, I get to root@~:. It seems that Junos OS didn't run well and runs the normal Linux OS only. Can you help?
@jongreenit Жыл бұрын
@@sergiot2014 Good to hear your issue has resolved, I'm not too familiar with superputtybin - what are you seeking to do?
@elmehdibenseddik2689 6 ай бұрын
I am using eve-community version the latest one, I have installed the templates, config-scripts, and icons and when I start the node I got the FPC 0 in an absent state, no ge* interfaces are showing up, any idea please, thanks
@jongreenit 6 ай бұрын
Hey, sometimes it takes a moment after booting the device for the device's interfaces to come up. Are you still encountering this issue?
@amigodiba9560 6 ай бұрын
I have the same issue, it continously booting up without any FPC there
@jongreenit 6 ай бұрын
@@amigodiba9560 Hi, I've had some people performed the steps outline hear and were able to get it working. Try reinstalling the image using the steps outlined in this video: kzfaq.info/get/bejne/rdagYNGp06e6f2g.htmlsi=FnOqiAtFrxn6vDY7
@RanjanRanjan-jf5xs 2 ай бұрын
Junos image uploaded in EV-ng but when it starts and stops immediately.
@meysemsdk8196 2 ай бұрын
same!
@jongreenit 2 ай бұрын
Try checking out this vid I put together: kzfaq.info/get/bejne/rdagYNGp06e6f2g.html
@davidgarita1643 24 күн бұрын
having the same problem. already followed the other youtube video and still starts and stops immediately
@tkoauto Жыл бұрын
follow your steps, but finally execute "/opt/unetlab/wrappers/unl_wrapper -a fixpermissions" on EVE-NG The system did not respond with any messages. Even so, I log in to web eve-ng and create a new node, but I still can't see the vjunos option.
@jongreenit Жыл бұрын
Have you tried restarting the EVE-NG VM?
@ThelongWatches Ай бұрын
This is also my case, the system did not respond any message or prompt any Valid messages.
@RandomsVideoS123 9 ай бұрын
this juniper image file contains which juniper devices
@jongreenit 9 ай бұрын
This is the an virtualized version of the Ex9212
@cochenpants5492 6 ай бұрын
I can only use switch. Any work arounds on how to use 2 or more as the 2nd one will not boot up
@jongreenit 6 ай бұрын
These devices are a bit resource intensive
@jongreenit 6 ай бұрын
It could be due to resource consumption on your pc
@cochenpants5492 6 ай бұрын
I'll try the older one. Are you able to load load 2 and more ?
@mohammedelimam3325 7 ай бұрын
what about pnetlab ?
@jongreenit 6 ай бұрын
Interesting...i've never heard of pnetlab - I'll have to check it out
@tkoauto Жыл бұрын
and im running 5.0.1-19-Community
@jongreenit Жыл бұрын
@tkoauto you will need to manually update the templates on your EVE-NG node. See the first three steps in the link below to perform this process: www.eve-ng.net/index.php/documentation/howtos/template-icons-and-config-scripts-update-from-git/
@christostz03 8 ай бұрын
@@jongreenit Thanks vermuch for the extra video!!!
@jasonmelville4104 Ай бұрын
I keep getting the following message " --[end kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance) Cannot enter any thing else after message.
@jasonmelville4104 Ай бұрын
The vEX vm is not starting up on EVE-NG. Following the process to install it and installed templates. The EVE-NG is the supported release for the vm.
@jongreenit Ай бұрын
Ah yes, this seems similar to an issue I ran into in the pass try following this video here and let me know if that resolves the issue: kzfaq.info/get/bejne/rdagYNGp06e6f2g.html
Lame Average Techies
Рет қаралды 21 М.