How to adjust a Vespa ignition
Рет қаралды 14,381
2 жыл бұрынIn this episode we show you how to set the ignition timing on a Vespa px.
It’s important to have your ignition timing right.
This needs to be checked when tuning a engine or changing the flywheel on a Vespa px.
Don’t forget to subscribe and like 👍
@owengune 5 ай бұрын
Great video, I am still trying to wrap my head round it, but it is a good thing to know.
@Nordicexplorer1 5 ай бұрын
Thanks 🙏
@NickwithInk 2 жыл бұрын
Thank you for taking the time to do this. Def helped! Much appreciated.
@Nordicexplorer1 2 жыл бұрын
Thanks for the feedback 👍
@richardtutton7642 2 жыл бұрын
Hi, I have the same Polini ignition kit that you have. You must set the ignition timing at a fast tick over because that ignition system retards 1 degree every 1000rpm. The Polini ignition kit ignition timing retards 8 degrees at high rpm, so if you set the ignition timing on a fast tick over at 24 degrees before top dead centre. At high rpm the ignition timing would be 16 degrees before top dead centre at high rpm. Hope this helps. Regards Richy.
@Nordicexplorer1 2 жыл бұрын
Thanks for the information, I will look into this. I think the installing description for this system was very poor and did not make it very clear on where to set the timing.
@Nordicexplorer1 2 жыл бұрын
Now I could see in the description that the pre ignition should be 23 degrees at 3500 rpm. I have fixed it now. Thanks for enlightening me. 👍
@Nordicexplorer1 2 жыл бұрын
How much does your bike rev? Mine seems to go up to about 7500-8000 rpm. I thought it would be a bit more. But I haven’t done a proper test yet.
@mejdibenhamida1608 Жыл бұрын
great video, what is your engine setup?
@Nordicexplorer1 Жыл бұрын
Thanks 👍. I’ve sold that Vespa but here’s a link to a video about it: kzfaq.info/get/bejne/pLR8o7KG3t-cmac.html
@rodz7910 3 ай бұрын
Where did you get that air filter/ bellow adapter? Thanks.
@Nordicexplorer1 3 ай бұрын
www.sip-scootershop.com/en/product/air-intake-system-polini-venturi-carburettor-si-2424_20301520
@Nordicexplorer1 3 ай бұрын
This is for the 24/24 si carb, it’s a different type for the 20/20.
@vjxjkd4040 2 жыл бұрын
くさんありますありがとうございます」、
@Nordicexplorer1 2 жыл бұрын
I haven’t got a clue what you’re saying. 😁
SIP Scootershop
Рет қаралды 479 М.
Shedtune Russ & Dom
Рет қаралды 2,8 М.
Sergio Outdoors
Рет қаралды 83 МЛН
ScooterLab.UK
Рет қаралды 15 М.
SIP Scootershop
Рет қаралды 16 М.