How to adjust injectors on a VW PD engine

Рет қаралды 87,163

4 жыл бұрын

Humanity runs on coffee.😊 ... www.buymeacoffee.com/NinjaGam...
Today we will show you how to adjust the injectors on a VW PD engine (BMP)
Our video is for informative propose and we can not be made responsible for any damage made during the operation. If you are not sure you can manage this operations please contact a authorised workshop to help you out solving the problem!
Hit the like button and subscribe for more videos!
Hope you enjoy!

Пікірлер: 77

@BuddyMechanics 3 жыл бұрын

Humanity runs on coffee.😊 ... www.buymeacoffee.com/NinjaGameSquad

@cincoseistres 2 жыл бұрын

thank you it helped me i had no idea on how to adjust them

@SciFirstMovieTalk 3 жыл бұрын

Very informative video. I have learnt a lot from watching your videos. Thanks for sharing.

@BuddyMechanics 3 жыл бұрын

Glad it was helpful!😊

@loguesboroughfarms1091 2 жыл бұрын

Hi! Your channel is very interesting. My husband will definitely make use of your channel. Great tips!

@luckystarglobal8523 3 жыл бұрын

Great work thanks for sharing with us

@lifeofsaphoya 3 жыл бұрын

Very Cool video thank you for this

@intriguedbynique7821 3 жыл бұрын

Funny my engine just went out in my truck! New friend here to support.

@lifewithrickie151 3 жыл бұрын

I like your video it's very informative

@pricelesslife8175 3 жыл бұрын

Thanks brother

@MaricarandSam 3 жыл бұрын

Thank you for sharing☺

@BuddyMechanics 3 жыл бұрын

My pleasure 😊

@lifewithmax3469 3 жыл бұрын

Helpful clip this is

@foodies8968 3 жыл бұрын

Great job buddy.

@BuddyMechanics 3 жыл бұрын

Thank you! Cheers!🙏

@prometheus160 3 жыл бұрын

thank you buddy

@BuddyMechanics 3 жыл бұрын

Any time!

@TheBlaert 3 жыл бұрын

I thought my cam was worn but turns out the ball pin on top of the injector had stuck in the roller adjuster screw. Now the screw and pin are totally different to another set I have in my garage and I can't find anything online about them. The pin is twice as long and goes inside the adjuster screw quite a bit. I was able to interchange them but could the early PD injectors have been different like this?

@KevsFitnessZone 3 жыл бұрын

Informative 💯

@jaidahhtv4725 3 жыл бұрын

💕

@oorangejuce 2 жыл бұрын

Great video. One question: should rockers constantly touch injectors during the rotation? because i have noticed that there is a little gap between rocker and injector on my tdi, and rocker has some free movement during the rotation cycle.

@tomm579 Жыл бұрын

the gap allows for heat expansion

@BambaGanza 2 жыл бұрын

Can you make a video on replacing the valve seals on a VW PD engine without removing the cylinder head?

@jemmace2586 Жыл бұрын

Ok? So why adjust/tighten the injector's on a diesel pd engine, there's a few videos on this subject but no explanation why??

@MegaSunRise3 3 жыл бұрын

Hello! Is it not necessary to use an indicator dial? How do you know when the injector is fully actioned?

@BuddyMechanics 3 жыл бұрын

1) remove rocker cover 2) Rotate CAM until the rear of the roller of the rocker arm is at its highest point... (thus compressing the injector the most). Rotate the engine clockwise only, and only by turning the engine at the crank bolt. Remove glow plugs for easier turning. 3) screw the adjusting screw in all the way in until resistance is felt 4) turn the adjusting screw BACK 180 degrees 5) maintain position of adjusting screw and tighten the lock nut 6) repeat the procedure 1-5 with the other 3 injectors This is how we do adjustments without indicator dial. If you don't feel comfortable with our procedure, please get support from an authorized workshop. Best regards!

@TheBlaert 3 жыл бұрын

@MagicStick You don't really need a DTi

@GaryTaylorvw 2 жыл бұрын

Hello, is it 180 for the 5 cylinder 2.5 Bnz engine please? Great video, thanks

@ashwilliams4989 Ай бұрын

yes, this procedure is for all turbodiesel VAG with Pumpe Duse (pump injectors) even 5 liter V10 TDI VW Touareg 1st gen.

@ricardopinto1765 2 жыл бұрын

I have a code p0302 on my VW pd engine! Esporadic missfire on the 2 cilinder! Can this be my problem or the injector wiring harness is more possible as it's a esporadic error! Thanks so much ☺️🙏

@dyl5518 3 ай бұрын

Could be wires or injector not operating proper. Did u find the problem

@garymills6702 2 жыл бұрын

Are they adjusted at TDC or BDC? This wasn't clear from the description given.

@BuddyMechanics 2 жыл бұрын

Rotate CAM until the rear of the roller of the rocker arm is at its highest point...

@sukosdcristian5287 10 ай бұрын

So I did everything exactly, and the engine starts and works perfectly but I have no power. Check't everything from turbo, vacuum valeve, vacuum lines. Everything, absolutely everything is fine. Yet I have no power when accelerating it's as if I don't have a turbo on 😢

@dyl5518 3 ай бұрын

I don't see you using a dial tester indicator are you just judging by eye the lowest point of compressed spring tryna figure out till I do me own

@mikemiklavic1930 2 жыл бұрын

If these are out of spec could it cause rough idle and vibration in the cabin?

@kazzng2087 2 жыл бұрын

Did u get an answer to this bruh? I'd also like to know.

@le1ght 2 жыл бұрын

I'm having same issue.i have checked my values an no 2 is it .

@ynnnc 7 ай бұрын

Did u get an answer to this bruh? I'd also like to know.

@c4r5on88 2 жыл бұрын

What does this do please?

@davidhughes2755 10 ай бұрын

What if the injectors have been reconditioned? Im putting a set back in but the part that meets the adjustment screw is sitting very proud to the injector spring, is this normal?

@abirdseyeview7587 Күн бұрын

ive just done my seals and ive got a nasty tick from the rocker cover - so going to try this! Watch this space!

@SayWhaaaaaaaaaaaaaaaaaaaaaaat 3 жыл бұрын

SO HOW THEY UNSCREW IF NEEDED TO SCREW SO MUCH TO 'CALIBRATE' ?

@sithjediemperoroverlord7337 2 жыл бұрын

what does adjusting the injectors do

@ynnnc 7 ай бұрын

Thats also what I am trying to find out

@pawknudsen3902 3 жыл бұрын

Is the engine hot or cold when you adjust?

@BuddyMechanics 3 жыл бұрын

Cold... The engine was cold when we did the adjustments.

@pawknudsen3902 3 жыл бұрын

@@BuddyMechanics thanks - i will try your methode on My skoda Octavia BKD 2.0 TDI

@basstard13 3 жыл бұрын

@@pawknudsen3902 did you try on the BKD? Is it the same procedure?

@LazarRadunovic Жыл бұрын

Is this adjust the same on 2.0 sdi engine

@jean-marcgabriel8129 8 ай бұрын

Yes

@Dylan-zd4sv 3 жыл бұрын

Dose that work on a 04 tdi bew?

@BuddyMechanics 3 жыл бұрын

This Engine was used in the following cars: 2002-2005 VW New Beetle 2006-2010 New Beetle 2009-2010 New Beetle Convertible 2002-2003 Golf (Made in Brazil) 2004-2007 Golf (Made in Brazil) 2002-2005 Jetta (Made in Mexico) 2003 - 2006 Jetta Wagon We don't remember to see this engine in our workshops, but from it's description (1.9 Diesel TDI Turbocharged Inline-4 SOHC Unit Injector (PD - Pumpe Düse) 100HP) we say that's same procedure.😊

@dylanlafleur4272 3 жыл бұрын

By making this adjustment, does it inject more fuel?

@josephseymore8560 Жыл бұрын

It ensures ignition timing, that the injectors start spraying at the right consise time

@palelekasss 2 жыл бұрын

What about 16v engine?same 180 degrees?

@dovalad 2 жыл бұрын

In 16v 2.0tdi 103kw it is 225 degrees

@pawknudsen3902 3 жыл бұрын

Its as on a bkd engine and it works fine 👨‍🔧💪🏻

@dovalad 2 жыл бұрын

on BKD it is 225 degrees back, not 180 as in this video

@Anthonymvpr 2 жыл бұрын

@@dovalad 225 is for Siemens injectors, 180 for Bosch ones. It explains that in the AutoData.

@sline3660 7 ай бұрын

I though it's 90° Isn't it?

@tabanmarius5394 Жыл бұрын

Se pricepe tati la mecanică😁🙃

@fivedotsdave9723 2 жыл бұрын

What would be a sign of needing to adjust the injectors?

@danielmoasa9709 2 жыл бұрын

engine shake at idle

@patriciandapewa3046 2 жыл бұрын

My car consuming to much fuel

@ynnnc 7 ай бұрын

Should have canceled the 4motion

@ioflorinio 3 жыл бұрын

180? OR 225? degrees?

@BuddyMechanics 3 жыл бұрын

180 degrees

@ioflorinio 3 жыл бұрын

@@BuddyMechanics see here minute 47:14 kzfaq.info/get/bejne/q7t9p9uAv9nGlqc.html&ab_channel=SYDiagnostics

@ioflorinio 3 жыл бұрын

if you tighten wrong, you risk damaging the pd injector ( inside pump ), can you explain what happens if you tighten more than manufacturer specs? lets say 90 degrees...

@BuddyMechanics 3 жыл бұрын

@@ioflorinio you have to check the specs for you engine in a workshop software like Autodata... If do not feel safe, please go to an authorized workshop and let a certified mechanic do to the job.. regards 😊

@BuddyMechanics 3 жыл бұрын

@@ioflorinio as you said above, you will damage the injector... our video is for informative propose... This is how we adjusted the injectors for this engine... We don't say to anyone to do like this or that is the right way... This is just how we did this and it worked perfectly.😊 Cheers mate!