How to Age Wood With Vinegar & Steelwool

Рет қаралды 453,373

7 жыл бұрын

This is a video of me brushing vinegar and steel wool on my Watermill where I had to replace the batten strips on the siding. If you want to see the Koi Pond video in full bloom and what the Out come of this process is then click the link below. And be sure to like and subscribe and hit the notification bell 🔔 for updates. Thanks for watching!!
Koi Pond video
• My Japanese Koi Pond i...
How to mix it up.
One BALL jar or it want work. (NOT MASON..🤣)
One cup of White Distilled Vinegar
One cup of boiling HOT water
One triple zero steel wool pad. (Super Fine cut into small pieces)
One capful of hydrogen peroxide
Mine sat for two weeks until I did this job.

Пікірлер: 429

@withit062714 5 жыл бұрын

It works, I kid you not! Right now I'm looking at a pine plank I bought last week at the lumber yard that looks like it's been outside in the weather for the past 20 years! Thank you very much, Mr. Cole, I couldn't have done it without you!

@ColeAviation 5 жыл бұрын

SisterWithit - Good deal. I’m glad it worked out for you. 😁😉👍🏼

@fixit4182 5 жыл бұрын

SisterWithit o yeah!!

@ColeAviation 4 жыл бұрын

Patrick Lowney - Yes I do. I have a 1946 J-3C Cub that may Grandfather left me. Check out my videos.

@ColeAviation 4 жыл бұрын

Patrick Lowney - Yes sir. Burt changes a lot in Aviation. Fantastic guy! He is 77 now. Not 75. Lol

@romaineathey3663 6 жыл бұрын

so i made it too . just by using woodprix woodworking plans :)

@sandygrey5513 2 жыл бұрын

Best plans to me!

@romaineathey3663 2 жыл бұрын

@@sandygrey5513 Glad you love it !

@robduivenvoorde8176 3 жыл бұрын

I tried this and figured out how to speed up the process. Instead of leaving the steel wool in the solution for 3 days, take the steel wool out after one day of soaking let it sit for 10 minutes so it rusts, put it back in the solution and it does the trick

@ardellehenderson906 25 күн бұрын

Bleach and Dawn will take it off your hands. I love your pond set up. You are very talented.

@ColeAviation 25 күн бұрын

Thank you for the tip. I need to make an update video on it now that it’s more natural grown around the pond and water fall. Thanks for watching!

@MickLBrad 6 жыл бұрын

Finally, after years of watching KZfaq videos, I can plainly understand what the narrator is saying. :D Regards, Mick, from southwest Tennessee.

@ColeAviation 6 жыл бұрын

Mick Bradford - 🤣 I hear ya brother. I’m just an old Country boy. Lol. Thanks for your comment! God bless!

@g.a.c.4139 4 жыл бұрын

This is a pretty funny reply. Thanks for your humor!

@jamiecleeves7921 3 жыл бұрын

Brilliant

@bceberhart 3 жыл бұрын

How the hell does 179 people do a thumbs down? Very cool video, just getting started with woodworking. Very excited about it and any little video like this is helpful. Thank you, Sir

@ColeAviation 3 жыл бұрын

Who knows. But that don’t bother me. They probably tried doing it but didn’t follow my directions exactly and it didn’t work for them so they came back and gave it a 👎🏼. 🤣🤷🏼‍♂️ Glad you liked the video. Wood working is very fun. I’ve been doing it all my life. Thanks again for watching! Merry CHRISTmas & Happy New Year!!!🎆

@sunshinencoastlines Жыл бұрын

Those are from those big city liberal types. 😵‍💫😬🙄

@TheLanceFrazier Жыл бұрын

Because they don't like Larry the Cable Guy doing woodwork! That's funny, right thar... I don't care who ya are! Git 'er done!

@MrClarkFamily 6 жыл бұрын

Thanks so much for showing the contrast between the effects of the aged “stain” on the strips and the fresh stain on the door. I have been having trouble getting the aged look but thanks to your video I will let it sit for a couple weeks! And I’m going to get gloves!

@ColeAviation 6 жыл бұрын

Sean Clark 🤣Do ware gloves. 👍🏼 Thank you so much for your comment! Best of luck!! 😉👍🏼

@g.a.c.4139 4 жыл бұрын

I used this process a few years ago...it works great! Thanks for reminding me about it. Cool pond too! Thanks for posting this video.

@ColeAviation 4 жыл бұрын

Thank you so much! God bless!

@johnn8414 6 жыл бұрын

Awesome ! Absolutely Perfect ! Yard looks great, Beautiful pond and mill house. Thank you.

@mellio9077 5 жыл бұрын

that was such a perfect solution. so simple and natural!! thank you! nice 👍

@SubWaySpiderman 3 жыл бұрын

for those who don't know you can boil the vinegar for making using it faster be ready in about an hour. less steel wool lighter stain more its darker.

@saramorisani 6 жыл бұрын

Hahaha, thanks for the bonus! So beautiful your surrounding! Interesting trick! Love your presentation - funny man!

@alekwithak5853 4 жыл бұрын

The fresh/clean pine on top of the weather wood was a really nice look! Provides a nice bit of contrast.

@dumbass3770 2 ай бұрын

I like the little doll house on the other side it's a cool look also

@ColeAviation 2 ай бұрын

Thanks!

@BoomKing69 4 жыл бұрын

All the other videos are about how to refresh old wood. This is awesome!

@julieann6585 6 жыл бұрын

LOL on the gloves! I have an entire house to trim and I want to make it look like old barn wood, going to get myself a Ball jar and mix some right up! Thanks for the instructions, your project looks great!

@ColeAviation 6 жыл бұрын

Julie Ann - 😂👍🏼You are more than welcome. Thanks for your comment!

@chrisinedison 6 жыл бұрын

Beautiful! I can’t wait to try this. Thanks for making what seemed impossible to be possible.

@ColeAviation 6 жыл бұрын

chrisinedison - You are very welcome. Glad it can help you out. 😉👍🏼 God Bless!

@transcendmind 6 жыл бұрын

Great video! Thank you for sharing I will definitely be using this for my planter boxes.

@ColeAviation 6 жыл бұрын

transcendmind - You are very welcome. Thanks for your comment!

@Apassionist 6 жыл бұрын

Really enjoyed watching the yard as well as picking up a new lesson in staining. Thanks a lot!

@ColeAviation 6 жыл бұрын

Has Jav - Thank you so much!

@Sly_Wolf_1 5 жыл бұрын

Thanks for posting this video, you've helped me out nicely. Love the koi pond too, 😥 it makes me miss koi.

@connieunknown6237 5 жыл бұрын

Amazing I just ran across this I need to age some plywood gonna give this a try!

@carbonitegamorrean8368 6 жыл бұрын

I really, really love all the scale stuff about your pond.

@ColeAviation 6 жыл бұрын

Carbonite Gamorrean - Thank you so much!!! I really enjoy it.

@kerrieshannon8650 6 жыл бұрын

So cool...amazing results!!!

@ColeAviation 6 жыл бұрын

Kerrie Shannon - Thanks for your comment!

@isaiasgonzalez7066 6 жыл бұрын

Wow. Thats it? Amazing easy.

@davidjonesthanksto7262 4 жыл бұрын

Thank you so much , great and quick way of getting aged timber look .

@ColeAviation 4 жыл бұрын

David Jones Thanks to - Your more than welcome. Thank you for watching part of my channel! 😁👍🏼

@alexanderthegreat9663 6 жыл бұрын

Fantastic!! Love the old colour! Top fella! Thanks for sharing!!

@ColeAviation 6 жыл бұрын

Bodhi Surfer - Thanks!!!!

@fixit4182 5 жыл бұрын

Thats the one I wanted to see Thank you so much. This is going to be great

@flacoral 6 жыл бұрын

Thanks. I knew about the vinegar and steel wool but didn't know about letting it sit for days or weeks. Great tip!

@ColeAviation 6 жыл бұрын

Mark Simmons - Thanks for your comment!!

@2qlrn273 5 жыл бұрын

Another person claims that adding 1 (tsp or tbsp ?) hydrogen peroxide after waiting just one night . . . but snipping the steel wool into the vinegar to start with . . . and it will darken it quickly via sped up oxidation.

@michebre 3 жыл бұрын

Wow, some fish! Looking forward to your pond video. Thanks Cole!

@tracydavison5531 4 ай бұрын

Your place is beautiful good work buddy

@ColeAviation 4 ай бұрын

Thanks 👍

@michebre 3 жыл бұрын

Thank you Cole, very informative. Greatly appreciated.

@ColeAviation 3 жыл бұрын

Michael Breskin -Your more than welcome sir. I’m glad you like it. Thanks for your comment!

@martinemjt 6 жыл бұрын

wow.thank you for sharing info.

@dwlsml4118 3 жыл бұрын

Nice video and down-to-earth narration. But your yard is the star of the video. Beautiful setup and cool looking buildings and features.

@ColeAviation 3 жыл бұрын

Aww thank you so much!! I hope it helped you. 😉👍🏼 I had just started putting my Koi pond in not long before I made this video on how to age wood. Here is a great video of what it looked like in full bloom during the summer. kzfaq.info/get/bejne/jblmlbGCrdyreok.html

@valkyriesardo278 5 жыл бұрын

Nice work. Thank you. Lovely pond too.

@HelloGoodby 4 жыл бұрын

Very talented builder. You could build and sell the little buildings...........!

@marykatherinerosson213 5 жыл бұрын

Wow!!! Thanks!! Looks awesome!!!

@luetteday4906 Жыл бұрын

This is a game changer!! Thank you for sharing this with us.

@ColeAviation Жыл бұрын

Your more than welcome. 😊👍🏼

@maryherbert2709 4 жыл бұрын

Thank you so much. I needed to know how to do this. Your shed and property is beautiful.

@ColeAviation 4 жыл бұрын

Mary Herbert - You are more than welcome.

@roysanderfurii5255 6 жыл бұрын

You definitely get a thumbs up from me! This is the first time I've ever given one as well! Clear instructions and it was an absolute joy watching your video! Thank you so much!

@ColeAviation 4 жыл бұрын

Wow! Thank you so much Roy! I GREATLY do appreciate your kindness. God bless you bud!

@seacoast4950 5 жыл бұрын

Wow, that looks great 👍🏽

@paintilludrop Жыл бұрын

Interesting, woodmaker just told me this technique, it was nice to see in action.

@ColeAviation Жыл бұрын

Thanks for watching!

@michebre 3 жыл бұрын

No Problem. Love your houses and buildings. They look so authentic! Very cool. Wish I had a yard like yours.

@ColeAviation 3 жыл бұрын

Michael Breskin - I greatly appreciate it. It was a lot of work. I need to do a pond update video. It looks so natural now. My fish are 18” to 24” now. And 4 to 7 pounds. 😁👍🏼

@jedijake77 6 жыл бұрын

Looks good! Fish pond looks good too

@ColeAviation 6 жыл бұрын

Jason Burnett -Thanks brother! 👍🏼

@WollongongSkyWatch Жыл бұрын

Beautiful! Rusty nails in vinegar will give a rich brown tone.

@richardnogan5239 6 жыл бұрын

thank you,very informative. Looks nice. I'm going to try this in an old house that I'm Remodeling to match some old wood in kitchen.

@ColeAviation 6 жыл бұрын

Richard Nogan - You are more than welcome. I hope it works out for ya. Be sure to enjoy some of my other videos as well. 👍🏼😃

@anthonyholmes7123 2 жыл бұрын

It does look awesome. Thanks for the tips.

@ColeAviation 2 жыл бұрын

Thanks

@SparkyMcBiff 6 жыл бұрын

Thanks! I learned something new today.

@ColeAviation 6 жыл бұрын

SparkyMcBiff - More than welcome.

@Yahoomediaclub 6 жыл бұрын

Awesome ⭐️⭐️⭐️👍⭐️⭐️

@spawnofsailor7158 Жыл бұрын

Beautiful! Im going to try this!!

@TheAnneFrazier 3 жыл бұрын

What a great idea! Thank you for a great video.

@ColeAviation 3 жыл бұрын

Glad you liked it. 😁👍🏼

@jeffnarum1373 6 жыл бұрын

You work hard. I hope you get the time to enjoy it. Great looking place.

@ColeAviation 6 жыл бұрын

Jeff Narum - Thank you Jeff! It is indeed a LOT of work for sure. Have you seen my latest Pond video? If not go check it out. 😉👍🏼

@jeffnarum1373 6 жыл бұрын

Chad Cole I will.

@dungshogun7271 5 жыл бұрын

Great! Thank you!

@jacquelinefoote8081 6 жыл бұрын

Excellent ☺thankyou just what I was looking for.

@ColeAviation 6 жыл бұрын

Jacqueline Foote - Your more than welcome. 👍🏼😉

@rob327c 7 жыл бұрын

Wow that's cool

@ColeAviation 7 жыл бұрын

robortian - Thank you for your comment!

@JellyrollHorton 4 жыл бұрын

Very good demo, Mr. Cole. Thank you for sharing.

@ColeAviation 3 жыл бұрын

More than welcome. So sorry so late on seeing your message. Must have over looked the notification.

@JellyrollHorton 3 жыл бұрын

@@ColeAviation No problem. The info is still good.

@jerrymorganjr 4 жыл бұрын

I build guitars and age most of them. I've always used graphite or dyes. Never tried this. Thanks for sharing!!

@ColeAviation 4 жыл бұрын

Jerry Morgan JR - Thank you so much for watching! Best of luck with your guitars!

@the10thleper 6 жыл бұрын

Nice, good job Sir. Thank you, from a boat builder.

@ColeAviation 6 жыл бұрын

the10thleper - Thank you sir for the kind comment! Check out my other videos of my pond and water mill. 👍🏼

@bluegill2030 3 жыл бұрын

Awesome!!!!

@scotgarland7526 6 жыл бұрын

Great job and some excellent work and vision. Finally somebody who talks like i do. Keep up the good work brother

@ColeAviation 6 жыл бұрын

Scot Garland - 🤣 Thanks brother! I appreciate your comment. Be sure to subscribe. I’ll be uploading more videos of my pond and old mill soon. 👍🏼 Have a Blessed day!

@nicolestewart 2 жыл бұрын

Omg this is amazing 🤩 thank you soooooooo much for sharing this. I love your garden 🪴

@ColeAviation 2 жыл бұрын

Thank you so much for watching. You should see it now. I need to make a update video on it. I think I’ll do that SOON. I have been to busy working on my airplane. 🙂

@BigDaddee1983 3 жыл бұрын

Thanks. Great video.

@squarelevelplumb 5 жыл бұрын

this is the third video I have watched for three different products and all that any of them do is color the wood. Not do anything to affect the grain to really make them look weathered

@LukeTheJoker 2 жыл бұрын

Thanks for the tip!

@ColeAviation 2 жыл бұрын

More than welcome. 😉👌🏼

@jamessizemore558 6 жыл бұрын

You can also add rusty nails to your mixture!

@averageschmo963 6 жыл бұрын

Great job!!!!! Thanks!!!!

@ColeAviation 6 жыл бұрын

Thanks! 😉👍🏼

@woodhenge4413 7 жыл бұрын

GOOOD!!

@creativehearts7127 6 жыл бұрын

Very nice. Going to use that in making my camper shell interior look rustic.iam going with a western cabin theme

@ColeAviation 6 жыл бұрын

Creative Hearts John Villanueva - Thanks John! That will be cool!!! Let me know how it works out. 👍🏼

@terryhiggins1561 3 жыл бұрын

Awesome!

@Craig_Humphries 4 жыл бұрын

Thanks for the tip. Think your water mill looks great, too!

@ColeAviation 4 жыл бұрын

Craig Humphries -Thank you so much!!!

@Craig_Humphries 4 жыл бұрын

Chad Cole - You’re very welcome! Can I also ask how old that maple tree is? I think you mentioned that you’d just planted it there - Did you plant it from a large pot or did you actually dig it up and move it?

@ColeAviation 4 жыл бұрын

Craig Humphries - Me and my late dad planted it beside his Japanese Koi pond in 2000. It is called a Dragon Lace Leaf Maple. But I went over and dug it up about 3 years ago or so.

@buzzwaffle 6 жыл бұрын

Perfect for what I need < Thanks!

@ColeAviation 6 жыл бұрын

buzzwaffle - Good. Hope it works out for ya. 👍🏼

@klandaverde2000 4 жыл бұрын

Looks amazing!!! And way cheaper than stain

@ColeAviation 4 жыл бұрын

Killa Catfish - Thanks! And yes it is. 😁👍🏼 It works perfect if you mix it just like I have it listed in the description of this video. Thanks for watching!

@billpruitt69 5 жыл бұрын

Good job !!!!!

@ColeAviation 5 жыл бұрын

Bill Pruitt Thanks buddy!

@csjmoore 6 жыл бұрын

Enjoyed. Like the pond!

@ColeAviation 5 жыл бұрын

Charles Moore - Thanks!

@RumbleFish69 3 жыл бұрын

Excellent video! I'm already chomping at the bit to weather-out some things I have lying around! Thanks for the video, brother!

@ColeAviation 3 жыл бұрын

Glad you like me it. 😁👍🏼

@RumbleFish69 3 жыл бұрын

@@ColeAviation Oh yeah, great stuff!

@ColeAviation 3 жыл бұрын

@@RumbleFish69 Thanks! Be sure to check out some of my latest videos of my J-3 Cub airplane restoration. 😁

@PrimitiveVsns 3 жыл бұрын

Made this solution and tested it after only three days. It turned white pine a dark brown. Going to test it again at the two week mark as per the video description.

@ColeAviation 3 жыл бұрын

PrimitiveVsns - Yep. It will turn it brown if you try to soon. That’s why it said two weeks. 😁👍🏼 Thank you so much for watching and for your comment!! God bless!

@PrimitiveVsns 3 жыл бұрын

Cole Aviation thank you for replying. I miss spoke, the wood I tested is Douglas Fir and the project that I’ll be staining is Douglas Fir. Been testing it every day just to see the different colors so I have an idea for future projects.

@ms.vel_1359 5 жыл бұрын

I have my steel wool and vinegar aging. One week now. I’m going to apply it to old wood to see how it comes out. Wish me luck!

@kennethrada9074 6 жыл бұрын

I just poured distilled white vinegar into a mason jar and put in one pad of 000 steel wool and put the lid on. I am going to let it sit for two weeks and give it a shot. I will let you know how it looks. Thanks for the video.

@ColeAviation 6 жыл бұрын

Kenneth Rada -Good deal. It will work better if you cut the steel wool into small pieces. 👍🏼

@mariachacin557 3 жыл бұрын

Really liked the video and the pond. 👍

@ColeAviation 3 жыл бұрын

Thank you so much!! 😁

@transamgirl4443 5 жыл бұрын

So.....i fell through someones deck repairing their roof......and its an old deck sooooooo....you just saved my ass

@ColeAviation 5 жыл бұрын

Nicole A REALLY??? 🤣👍🏼

@sandeebond4514 Жыл бұрын

Love it🤗❤️

@ColeAviation Жыл бұрын

Thanks! 😉👍🏼

@timoverstreet9925 2 жыл бұрын

Cool!

@lakeishagalloway8765 6 жыл бұрын

Is that your backyard? If so it is beautiful. It looks so peaceful and Surien like a country nature wonderland. I would love for you to do a video tour of your backyard. And if you can please include the construction process and what was your inspiration for the creativity of the overall look that you wanted to achieve.

@ColeAviation 6 жыл бұрын

Lakeisha Galloway - Thank you very much for your kind comment. We put this koi pond in - in remembrance of my late dad. He LOVED Japanese koi ponds and Japanese maple trees. I was able to go back to where I grew up and the people that bought his house was nice enough to give me my daddys Laceleaf Japanese Maple tree that me and daddy planted next to his koi pond. If you watch one of my other videos of the pond I tell the story behind the pond. 😉👍🏼 Koi pond video. kzfaq.info/get/bejne/jblmlbGCrdyreok.html

@pureforce56 6 жыл бұрын

Could you get a closer shot of your face? I can still see your ears.

@ColeAviation 5 жыл бұрын

pureforce56 - WHAT IN GODS NAME ARE YOU TALKING ABOUT?? 🤔

@anavrinhsub6081 5 жыл бұрын

Chad Cole I think he means back up a bit on the view of the camera

@gearhead6424 5 жыл бұрын

Good job

@ColeAviation 5 жыл бұрын

Dale Schellhamer Thanks!

@AussieFIag 5 жыл бұрын

Thank you soooo much 😀

@ColeAviation 5 жыл бұрын

MJ M - You’re more than welcome. 😁👍🏼

@livinglife8333 5 жыл бұрын

You can heat your vinegar in your jar, wash out your steel wool with a bit of soap to get the factory oil out. Squeeze out the water and snip it into the hot vinegar. Let it sit over night. In the morning add one teaspoon of hydrogen peroxide and it will darken, then just paint away. No waiting a week. 😉

@connieunknown6237 5 жыл бұрын

Ok gonna try this~

@swstiglich 5 жыл бұрын

Wendy and David do you use same water amount as his recipe or no water?

@artsmith103 5 жыл бұрын

swstiglich I don't think anybody is using water unless they are making a stain with tea.

@mitch5077 5 жыл бұрын

I've done that and my wood turns kinda reddish?

@donvandenberg5301 3 жыл бұрын

Used something similar (vinegar that I had used to remove rust from some old files) on the handle of an opinel knife. Let it soak overnight and it turned almost black.

@wttransport5834 4 жыл бұрын

Great vid chat👍🏿

@ColeAviation 4 жыл бұрын

WT Transport - Thanks for your comment!

@khyron6 4 жыл бұрын

Cool thanks :)

@RDnAC 6 жыл бұрын

Genius

@TheAlphaBette 2 жыл бұрын

"Ball jar, not a Mason" 😄👍

@johnhubbard6262 3 жыл бұрын

works great age leather as well

@ColeAviation 3 жыл бұрын

Really now... that’s awesome!! 😁👍🏼

@boneheaded9751 5 жыл бұрын

Nice little spot ya got there.

@ColeAviation 5 жыл бұрын

Bone Headed Thanks!

@been2all505 3 жыл бұрын

Followed the instructions exactly. The wood turned dark brown. I could have much easier used walnut stain.

@ColeAviation 3 жыл бұрын

What kind of wood did you use?

@samsiler9339 6 жыл бұрын

Thanks! I so love this! Your yard is amazing! Do you make house calls, would love to have this whole area in my yard!

@ColeAviation 6 жыл бұрын

Sam Siler - Thank you for your kind comment! I’m sorry I do not. 😊

@goodolarchie 6 жыл бұрын

I like you chad, you'd be fun to do projects with and you clearly made some nice structures by the pond

@angiehowell5859 4 жыл бұрын

Thanks for a great video, Chad! You have a great space there - love the waterwheel and the koi pond. I do have a question. I really want to weather some pressure-treated wood that was used to put a tin roof over a swing. We are going to use some old barn wood for the gables, but you can see that ugly lumber and it really messes it up. Do you think the treatment will work on this lumber? I made a batch using your recipe and am letting it set up for the two weeks. Thanks for any advice and keep the great videos coming! You're awesome!

@ColeAviation 4 жыл бұрын

Angie Howell - Hello Angie! First off thank you so much for watching my video! I really hope you get what you need out of it. I hope you and your family are staying safe through out this CRAZY CRAZY WORLD. But as far as the treated wood goes I’m not a 100% sure how it will turn out. I’ve never tried it on pressure treated wood. Please let me know how it turns out when you do it. God bless!

@HomeImProveMentHow 6 жыл бұрын

That's excellent I've not heard of this I do Woodworking and staining and custom stairs but that's definitely something to experiment with thanks for sharing. For what it's worth I've just subscribed to your Channel and gave you a thumbs up as creators we definitely need to support one another now more than ever keep up the good work bro, Ken

@ColeAviation 6 жыл бұрын

Easy To tips and tricks Etc Etc - Thanks Ken! Yes sir I returned the favor already. 😉👍🏼 I appreciate your comment. I use to build houses with my dad prior to 2004 before he passed away from lung cancer. Installing stair cases was my favorite thing to do. I’ve built some that will knock your eyes out. 😆😉👍🏼

@HomeImProveMentHow 6 жыл бұрын

Chad Cole do you have any pictures or videos on it I have some I've made out of it two-by-fours 4 by 3 points that I handshape with the grinder added detail to the edges with my router the videos are not together on my page but I love to see what kind of work you've created for sure and thanks for subscribing I will also share your channel on my Facebook page I need to have a page just for my KZfaq channel I haven't created one yet that'll be next I guess I should do that like right away. Thanks for getting back to me I appreciate it looking forward to seeing some pictures all right take care bro God bless Ken

@HomeImProveMentHow 6 жыл бұрын

Chad I'm sorry to hear about your dad, I was taking care of my dad before he passed and it sure is a sock in the gut to say the least for sure! My dad and I also worked on houses Framing and stacking doing what's called pick up here in California yeah it's a shot in the heart. But I believe you're a Christian from how you're talkin and I take it your dad must have been a believer so that can you know put peace in your soul for sure all right just wanted to touch base on that then it mean to overlook it in your first response God bless and looking forward to seeing some of these pictures of these houses you've done if you have any that is. I sign my wife up to subscribe to your Channel she also has a channel but I was just trying to help you get to your thousand subscribers and I may have another person I'll have sign up as well alright take care By4now!

@ColeAviation 6 жыл бұрын

Easy To tips and tricks Etc Etc - Thanks! Yes sir my daddy was my best friend for sure. My daddy taught me everything I know about working with wood and Heavy equipment operation. Then my Grandaddy (my moms dad) taught me everything I know about flying and airplanes. 😃👍🏼 And yes sir I am a BIG Christian believer in the Lord Jesus Christ. 🙌🏼 Sorry to hear about your dad. That’s awesome that y’all worked on houses together to. I really don’t have any pictures of the staircases I installed. 😏 My dad’s widow/WITCH took all of our photo albums that my late grandmother(daddy’s mom) made over the years.

@ColeAviation 6 жыл бұрын

Easy To tips and tricks Etc Etc - THANK YOU SO MUCH for helping me reach 1K subscribers. 🤙🏼😃🤙🏼 I will be making an update video on my Cub probably the end of this week. I’m still a long way from putting the wings back on. I’m having to change out both wing tips with wood like it was from the factory. My new leading edges will be in Wednesday afternoon. It’s coming together SLOWLY. Lol. I’m gonna have about $40k in it when it’s all said and done. I just payed a guy $23k last week to build me a brand new Continental C-85-8 engine. The factory matching number engine I took off was a wore out A-65-8.

@samesaw6340 6 жыл бұрын

Smart

@cherryvaleleatherock6900 6 жыл бұрын

Thank you for this wonderful video. I'm wanting to do this in m bedroom using pallet wood. It's just the look I'm looking for - and the wood is FREE. 8-) I subbed and gave you a thumbs up ! Looking forward to your videos. Thanks again.

@ColeAviation 6 жыл бұрын

CherryvaleLeatherock - Glad you like the video. 😉👍🏼 Hope it helps you out. Thank you so much for the subscribe! God bless!

@wiolettawesolowska8145 3 жыл бұрын

Hi there, very useful video! Thank you 🙏 I have a question, can you use this method in treated wood ? Also do protect the wood from weather conditions after ageing process? I love the old look style, but I don’t want my new build cabin to get rotten and damage . Can anyone advice ?

@ColeAviation 3 жыл бұрын

I wish I knew but I’m really not sure if you can use it on treated wood. As far as a protectant I’ve never use anything on any of my projects after using this method. Sorry I’m not much help. Maybe someone else can reply to it. Thanks for stopping by and watching! 😁