This video shows you how to properly align dual beam headlights (high beam share the same bulb with low beam headlight) so that you get the maximum lighting, yet you wont blind other drivers. Thanks for watching and if you like our videos, please give us a thumbs up, and subscribe to see more installation videos! New Videos every Thursday.

Helped me alot, especially the first 00:20 seconds talking about which led sits back further. thanks!!

Exactly. Just a few minutes ago a guy, jeep talk, gave me his Led headlights he was going to put in he's wife's Renegade. He said he had trouble clocking them. Think, by watching this video the key is to rotate the ring 180. Glad to find this video right off so can't wait to see if these LED bulbs are better than the silver star.

Thank You! Exactly what I needed to get mine working properly!

Thanks for this video. It just fixed a major headache I've been trying to sort out.

Thanks for teaching the proper positioning of the low and high beam during installation.

Thanks for the video. Oracle instruction are so vague on proper adjustments. This made it easier to figure out the proper way to align mine.

Good Video! Thanks! I didn’t know that and now I Do!

THANK YOU! This is exactly what I was looking for! Fixed my problem!

You are a legend! 🙏

Thank you. You was very helpful.

Easy on the background music sheesh

Thank you!

Awesome thanks 👍

Thanks for sharing .

Awesome informative video bro 😊

It really works..

i tried it on new led bulb... and it worked... before the car in front of me is blinded because of the highbeam in normal switch... but now its already on the right position... thanks for sharing your DIY

Exactly what I needed now off to fix mine

This is the knowledge

Unfortunately newer models don't use this pattern anymore but at least some do mark top and bottom

I love you.

Thank you It was helpful

Groovin’ tunes anchor this informative vid. Thanks for teaching and entertaining. You rock!

Let's do the hula dance🕺🏾💃🏽

Very helpful video, but why is my led with thick build idk how to say it in english but i bought the slim one it works better than the circle one,im sorry for bad english

Is that simple cool thanks

Hopefully this helps in my f250. My high beams hit the ground when I turn them on. My headlights are aimed as far down as possible and people still think my brights are on and I can’t stand people who drive with their high beams on with no consideration for others. I don’t want to be mistaken as that kind of person. Thanks for the information.

What if both sides have single LED strip just bigger one. I installed as facing 12 and 6 oclock and looks like high beam makes bare difference from low beam, so ima rotate and see if 3 and 9 oclock makes difference

What if I have a single low beam (2 sided LED bulb) in a projector headlight. I noticed when i installed mine last night, there is a dark spot/line in the center of the projector when light is turned on.. Is it still 3 & 9 o'clock for projectors?

Hello, question. Is it normal that my left low beam light is lower than my right lowbeam light? My friend said that its okey because it will not cause glare on the approaching traffic. I'm from Philippines and we drive on the right side of the road. Thank you

Hi im using projector light, now i change to led bulb, then my led not getting brighter, so i need to push my led down so led getting brighter, it is just need to leveling my lamp or adjust the pusiton my led?

How do u keep the bulb from wiggling? My clips wont get around the big end where the fan is? Just rig it around with electrical tape

what if both the yellow chips are all equal and 1 beside each other... i have 2 set for my acura.. Aukee h11.. and aukee 9005(Drl and high beam)

What about on vehicles that use separate bulbs?

Hello Sir, In our vehicle there are both reflector (low beam) and projector (high beam) for projector i have installed HID buld and for reflectors led bulb, so how we align the led.

Thanks I put my wrong I will fix it now

Do i need to do this in projector headlight..What is the right direction for 9005 led bulb In projector headlight ?? Up and down or left and right ? Or its the same result???

If i buy X-HL Vision 9008 H13 LED Bulbs Headlights, will they work DRL also or only lowa and high beam? i have nissan nv200 (2015). it is important for me to have DRL, i bought a set from sealight but they work only for low and high beam. so i want to make sure before buying the stuff from you guys. Thanks

So if i want to adjust beam pattern i have to keep inserting bulb in check it take it out losen the screw rotate where i think it needs to go tighten the screw put the bulb back in and recheck ? ( my bulb has set screw) wow thats alot of work and specialy having to work on the car at night so i can keep checking the output sux 🤦‍♂️

How do you adjust it on an H7 1:1 light?

Hello - my LED Head lights Have a slight issue the full beam is the deep and the deep one is the full beams... will this fix the issue?? Like everything works etc but this light aiming issue is bothering me...

Now it make sense why it seems like my high and low change position💀

Hi for a Subaru impreza limited 2013 Headlights High beam and low beam which would be the indicated

Anyone know why my Low beams are bright but my high beams just seem kinda dim although they seem to shine farther. Have this on my car and truck, the high beam seems like it’s aimed normal just a little higher than low

After this video, I feel like I dropped about half my intelligence..

Should I roll a spliff for this project? (The music lol)

Sooo…if my high and low beam are operating in the opposite way, i should twist them 180 degrees?

Omg...I can't seem to find a video that clearly shows the correct direction that the headlights should face...so...which direction should the flat part be? Facing side to side (out...?) Or facing up and down? I have separate bulbs for the high beams.

So the most forward led goes on top? Little confusing video btw

What if I am unable to get the high beam strip in the bottom position, only the opposite is possible, there’s no way to adjust it any different

Background noise made me feel like I'm getting a tour guide on the islands

Is it best to use your high beams while following a car so he knows youre there and doesnt stop suddenely?

I can't seem to rotate mine, there's some kind of set screw

I’m confused. The high beam and low beam on my car are two completely separate bulbs

I was waiting for the adjusting and aiming.. never came.

Rotate that chunk lmao

I think the part you call a chunk is really called a Chuck??

Chunk? An industry inside word I guess for plastic ringy thingy that does not fit the LED bulb. It would sure be nice if these Chinese import things came with SOME kind of instruction sheet and fit that for which it was intended, even though supposedly for this model and year truck. I have my 2003 Ram 1500 dismantled, fuse box out, to access the rear of the lights. I just came inside, after having been eaten alive by no-see-ums, to view further instruction videos as it is also dark outside. I guess I need to buy a lit garage and gloves before I attempt what should be one of the simplest replacement corrective maintenance jobs around. Oh to have my '72 Beetle back...Please!!! I look on the bright side though. Car designers do not design aircraft.

The "chunk"? Is that the technical name?

Regardless of it being a single or dual led light what is the correct orientation of the led? Should the LEDs be at 12 and 6 or 9 and 3 o'clock?

No wonder I feel like nothing happens when I change to high It may be wrong I'll check

How do I align my leds with projector headlamps??? I can’t tell if they are correct or not

It's "CHUCK" not "CHUNK" by the way. Otherwise, very helpful video.

Good informational video but horrible music.

I used to do this but not anymore, there are already 360 deg LED bulb out there where it mimics the light distribution of Halogen, just use 360 led bulb, better intensity and light output plus no dark spots like 2 sided LED

Another video that doesn't explain the LED kits with the shields on the side, I need to know if they should be installed facing up or down.

180° gets you back to original place. You mean 90° you are welcome

Why is one light shown to be shining lower than the other one?

good,,,but the music,,,,,,,,,,,,,wowwwwwwwwwwwwwwwwwww

Would have been better to show before and after of wrong and right so we would know what to look for

Dude, whats with the mariachi band music, it sucks in case you werent aware

Led tipe a produck

So where’s the kick pattern ?

TOKKALO MUSIC APANDIRA BABU. ..

Good information but the background music needs to be removed. That's just so annoying when your trying to listen to what your saying.

Aspect ratio ?? I can't see what your even filming 😂

Sorry to blow a comment but those led chips aren’t aligned correctly LOOK OF THE CHANGES ON THE POITIONS OF THE CHIPS RIGHT WHEN THE VIDEO STARTS AMD FLIPS IT ////both Led chips should be place identical on both sides SS these are opposite

MUSIC NOT NEEDED!! TAKE IT OFF!! THANK YOU.

The music is sooo annoying you are teaching!

Leave the music away . It's terrible.

Music is too loud. I had to stop watching

Great informational video, terrible music, Way too loud for a teaching video can't hardly hear what you're saying

Dont put it on these headlights. Its dangerous for other.

Get rid of that music.😡

get rid of the horrible music

The music is so annoying

You do realize, headlights can be adjusted without taking out the bulbs?