I just installed the V3 kit myself on my '22 Ghost. It seems complicated at first but YOU NEED TO TAKE YOUR TIME. Patience goes a long way. If you're technically inclined, you'll actually enjoy the process. I installed everything correctly but still ended up getting an error; "F1" on my screen. After multiple attempts to troubleshoot I realized the Regen module they sent me in the kit was faulty. I emailed support and within a few hours they got back to me and shipped me a new Regen module. Apollo Support is excellent! When you purchase this scooter, just know that the Canadian company really cares for their customers. I'll update here once I install the new Regen module and everything works fine.

I was able to get her done with by 2021 Ghost... Very satisfied. My advice to the serious amateurs (like me) is just take it slow, don't force anything, and watch/pause the video over a few times while you are doing it. A few things that tripped me up: 1) The wires that are doubled with two connectors for the LEDs are two for the left front and back and two for the right front and back. Makes sense once you know... He doesn't do a great job of explaining that and the wire colors don't match the video. As @Josh M7 points out "I've learned the Green Black double connector is the Right Front/Rear Leds." The other pair is for the left. 2) There are other relevant comments here - like don't forget to add the foam protecting the wire on reassemble. 3) I set the scooter on top of a small box for bench testing. It took a while to get the calibration step figured out. You can turn it on just to see that it is working and play around with the controls. Once you do that, turn it off. Now press the power button quickly - then immediately 10 times quickly to get the calibration mode going. If you wait too long after that first press it won't trigger. I was in kickstart mode - so I had to rotate the wheels to get the motors started when I throttled... 4) Reassembly is more of an art than a science, take your time: one step at a time. Good example left up to you is the bell doesn't get discussed... I left it off, but there is probably a position that could work... I did zip tie each connector as was done on the original install from factory. Also that little step on sealing the wiring harness into the deck is important if you want to keep her fairly water tight - i used some black silicone. Hope that helps!

I want to say thanks for doing this. No other scooter company would do this for their customers. I am comfortable doing this upgrade myself and just got it in the mail.

Hey Apollo Team, Got a question on the current Ghost 22 Mach 1 upgrade kit. I was fortunate enough to have an Apollo service center near me. $100 USD for upgrade installation for those interested. Will the lights be able to be turned off fully with an update? If not how will this effect the battery life of said scooter? If battery drains and dies out fully will the warranty cover this issue because of the upgrade? Can an extended warranty be purchased after purchasing the upgrade kit? Will a added piece or solution be available for the deck hook once the lcd monitor is installed? Unfortunately this can be an issue since it’s not lockable and if you want to transport the scooter manually by hand or car you risk a chance of the lcd monitor to crack or break since it’s not secured. Thanks in advance

forgot the foam on the battery =(

It’s nice to see the new one is way less jank then the old version.

I recommend re-shooting this video with the production version of this kit. The wiring harness shown and described in this video does not match the production version. I would also recommend a "demo" video of the production version of this kit to show what it is ACTUALLY capable of to perspective buyers.

I’d love to be able to add a super powerful headlight to the scooter that could connect to the main battery. The integrated lights on my 2021 model are basically useless.

Do u have tips about the battery use for this kind of electric scooter.

Hi, what about the foam covers for the wires that you emphasised at the beginning that we need to be careful with and not remove fully so we can reuse them. You then didn’t replace them. Can I have a free upgrade kit please? Thanks

Why is this video impossible to find by searching on KZfaq? I have to go through a link you guys provided in a video to find it.

Cool. But certainly won't be attempting the upgrade myself.

Hate de recevoir le miens !

Curious why are you sending out Ghosts with these free upgrade kits? Why not just install it for the consumer? I assume it's something about warranty? Do you give up your right to warranty claim if you do this upgrade?

I guess those foam bits covering the wire arent necessary to add back? Because he didn't in the video

Can you still switch from single to dual motor as well as eco mode now that we have removed those buttons?

I did the install my self. Everything turned on as soon as i plugged in the battery so i turned it off. Turned it back on again (could tell by the deck lights) but the screen was black. Went ahead and pressed the power button 10 times and the calibration started and finished while the screen was black and blank. Off and on again, the lights work, breaklight work but still no screen, the throttle doesn't work, and no turn signals. Hmmm...guess i need to call support.

UPGRADE 2.0: If your wire colors don't match the controller in the video, you may need this video instead: drive.google.com/file/d/1ed0xwa2gULo6L3uFQlboZO--ERNxonK_/view

Does this upgrade kit only work on the 2023 Ghost, or older models too?

Will I get more range with this upgrade?

When doing these tutorials please make sure that the information you are relaying matches what was sent to us. The colors of the wires in the video don't match the color odf the wires we recieve!!!! We spend a lot of money on this and literally TAKE APART THE ENTIRE SCOOTER TO TRY TO INSTALL THIS THING AND NOW WERE STUCK WITH NO CUSTOMER SUPPORT AT ALL!

When will this kit already be installed on the ghost?

can this controller do 60V?

Anyone in the Denver area want to install this for me?

5 min in and i already know i am never going to attempt this.

Apollo expects the average rider to do this upgrade? Completely unrealistic.

Pretty pricey. Considering the current screen is basically un readable.