How to Apply Floor Epoxy Like a Professional in Enclosed Trailer! (Plus Undercoating!)

Рет қаралды 16,507

3 жыл бұрын

This video will show you how to apply Rustoluem epoxy coating in an enclosed trailer! We give tips & tricks on how to make this job look professionally done. Also, we decided to do the undercoating on the trailer because their were some frame areas/spots that weren't coated. The frame was coating before the plywood installation so it was exposed wood. We painted the plywood to make it protected against the road conditions and rain/snow. All this work was completed while the trailer was new so we would have an easier time to do this work with not much necessary preparation.
Thank you for watching this video and hope you enjoyed! Please like, comment, and share to show some support! And go and press the subscribe button to see more videos from our channel!
Created with Wondershare Filmora

Пікірлер: 34

@joseluiscarias218 2 жыл бұрын

The best trailer rustoleum video I've seen

@wigglesforce2085 Жыл бұрын

Thanks 😁!

@brahdislloyd 3 жыл бұрын

Nice video. I've always been taught to "feed the chickens" when throwing the flakes.

@nestorm3221 2 жыл бұрын

Very helpful thanks for the video

@josemartinez-on3pt 3 жыл бұрын

Very good job you and your father did

@cjlst8 2 жыл бұрын

Did the floor screw dimples or plywood joints show through? I am debating on using wood filler to smooth the joints and screw holes.

@kwboost 3 жыл бұрын

Great idea on the under coating. what did you paint the underside with?

@wigglesforce2085 3 жыл бұрын

We used rusteluem performance black

@TheManari06 2 жыл бұрын

It is wood so I believe that using the spike shoes would of definitely left the spikes indents on the wood floor! just my 2 cents!

@retroworldseries7159 2 жыл бұрын

Did you prime the floor or tape the seams?

@wigglesforce2085 2 жыл бұрын

We did no priming or taping

@Bonebags 2 жыл бұрын

Have you received any cracking on the plywood seams since you've applied it?

@wigglesforce2085 2 жыл бұрын

So far it's looking 👍

@geraldwilliams3898 3 жыл бұрын

What was total cost, I am trying to budget for an 8.5x24ft trailer. I have looked at vinyl flooring etc.

@wigglesforce2085 3 жыл бұрын

About $8,000

@geraldwilliams3898 3 жыл бұрын

@@wigglesforce2085 I came in way under 8k, thank you

@HighOctaneGamer 3 жыл бұрын

8k to paint your floor? I just did the same thing for 400$

@wigglesforce2085 3 жыл бұрын

@@HighOctaneGamer trailer

@gapu263 2 жыл бұрын

How has the epoxy held up since applying it?

@wigglesforce2085 2 жыл бұрын

Its still in good condition, like new!

@gojeep714 3 жыл бұрын

What products did you use for the epoxy

@wigglesforce2085 3 жыл бұрын

Rustoluem Garage epoxy, thanks for watching!

@stevegottschling8094 3 жыл бұрын

What kind of clear coat did you use

@wigglesforce2085 3 жыл бұрын

Rustoluem clear coat, high gloss I think

@slatsgrobneck7515 2 жыл бұрын

Is the floor and ramp slippery when wet?

@wigglesforce2085 2 жыл бұрын

No because the flakes give it a rough texture

@gonzo116p 2 жыл бұрын

What’s the exact name on the box

@wigglesforce2085 2 жыл бұрын

Rustuelum rock solid garage epoxy, I think

@kameshajohnson7918 2 жыл бұрын

What size?

@wigglesforce2085 2 жыл бұрын

7x16

@mmconcretesolutions6624 2 жыл бұрын

Actually depending on your decking materials you don't want to seal both the top and bottom as the newer decking materials need to breath & they are a chemical composite product & are made to not be completely sealed.

@wigglesforce2085 2 жыл бұрын

The material we painted was plywood so I think will be fine, we painted it black underneath because we didn't want to get dirt and road salt all over it so we painted it once it was still new.