How to Apply Reflective Fibered Aluminum Roof Coating on an aged flat roof

No video

How to Apply Reflective Fibered Aluminum Roof Coating on an aged flat roof - Karnak 97

Рет қаралды 208,909

12 жыл бұрын

Protecting and sealing a roof with reflective aluminum asphalt roof coating, Karnak 97. Chris Huettig provides step by step application demonstration while providing helpful product information. Product may lower energy consumption.
Karnak 97 Fibered Aluminum Roof Coating
www.karnakcorp...
LOCATE A DISTRIBUTOR
www.karnakcorp...
www.karnakcorp...

Пікірлер: 56

@jgg204 6 ай бұрын

We have a torch down modified bitumen granulated flat roof. It's about 6 years old and has lost a lot of granules, so more and more of the black rubber is getting exposed. Once we have cleaned all loose granules and debris from the roof and cleaned it, can this product be applied to our modified bitumen granulated flat roof? And will the application of this coat, slow down granular loss?

@KARNAKroofcoatings 3 ай бұрын

Yes, you can apply this product (Karnak 97 Aluminum coating) to your mod bit roof. It will slow down the granular loss when applied. A better solution would be to apply our 220 Fibered Emulsion first before the coating. This will end up with a longer lasting, better result.

@davidspliffingston5349 Жыл бұрын

I'd like to use this in a mural I'm painting. If I used a clear coat anti-graffiti coating, would it adhere okay? Also, would it dull the shine on the Karnak?

@KARNAKroofcoatings 10 ай бұрын

Interesting! We have not yet seen this application. We recommend you try it first on a small inconspicuous section of the wall as a test area. We'd love to hear your results.

@todds5956 Жыл бұрын

What do you recommend for a low pitch metal old metal roof on my house. Upper MI so we get -30. Will this help snow slide off better too? Thanks.

@KARNAKroofcoatings 10 ай бұрын

Our 404 and 501 system would work fine as long as the slope is over 2/12. This means, for every 12 inches the roof moves horizontally, it goes down at least 2 inches.

@fishycomics 5 жыл бұрын

thank you made this look to easy if i had a mixer great if not should I do anything special to the 5 gal can turn it upside down while storing. till ready and then roll it. would doing two coats be better hten one

@shure46 2 жыл бұрын

No don't turn it upside down , it's fine .... just mix it before use

@fishycomics 2 жыл бұрын

@@shure46 when I did mine i did mix it,

@shure46 2 жыл бұрын

@@fishycomics that's fine , my point was "don't store it upside down"

@fishycomics 2 жыл бұрын

@@shure46 I understand thanks.

@KARNAKroofcoatings 3 ай бұрын

Jiffy mixers are very useful in this case.

@freddiejohnson3936 7 жыл бұрын

What about an A-frame do i stand on a good ladder and rolls the roof because im sure not gonna go up a aluminum roof and slide off and hurt myself or worse, also should i dips the roller instead of pouring the sealed on an A-frame roof and rolling it out as im painting a wall, because standing on a good fiberglass ladder and rolling the sealed on should do the trick because it's much safety that way also i have a extension rolling that can reach way over the lips of the A-frame to the other side of the roof top and once i get one side finish can just start from the other side, i think that's better than getting on top of a A-frame roof also much safety

@KARNAKroofcoatings 3 ай бұрын

Please reach out to our technical department if you still have questions.

@satberhoxhaj3347 3 жыл бұрын

which karnak aluminum roof coating is best which there are several 97,169,298,27,28

@KARNAKroofcoatings 2 жыл бұрын

Our 298 is the most premium, as it contains a rubber blend that allow for the product to expand and contract as the building/roof shifts due to settle and temperature changes. The other products are good and just as reflective, but do not contain the rubber.

@klau121 6 жыл бұрын

Which is better? The 97 or 298? Also how often should either be reapplied?

@KARNAKroofcoatings 3 жыл бұрын

298 is our premium rubberized aluminum product. You would reapply anywhere between 7 to 10 years, depending on surface conditions.

@ZSI_GamingBros 4 жыл бұрын

This keep it cooler?

@KARNAKroofcoatings 3 жыл бұрын

Yes! As with any reflective coating from Karnak, it will keep your building cooler and your heating costs down.

@punkuk1979 10 ай бұрын

Is this my best option for a flat roof with BUR sheets

@KARNAKroofcoatings 10 ай бұрын

It's a great option as an aluminum reflective coating! But a better performing one would be our 298 Alumin-R.

@mrleroy345 9 жыл бұрын

i have minor leaks in the roof will it seal those areas? also should i polycloth on the seams?

@KARNAKroofcoatings 9 жыл бұрын

jeffery Leroy Hi Jeffrey. Thank you for the question. Roof Coatings do NOT repair leaks. You have to use our Mastics such as Karnak 19 Ultra, Karnak 19, Karna-Flex WB, or Karna-Flex to perform repairs. And yes please polyester cloth or mesh is a good idea as it will reinforce the mastic repair prior to the application of the roof coating.

@kerberos824 3 жыл бұрын

Can this product be put down over existing aluminum roof coating that needs to be redone?

@KARNAKroofcoatings 3 жыл бұрын

Yes, 97 can be applied over previously aluminum-coated asphalt roofs. The roof should be clean and dry before coating.

@kerberos824 3 жыл бұрын

@@KARNAKroofcoatings Thank you very much!

@sweepthelegnyc 11 жыл бұрын

What applications would non-fibered aluminum coating be better? What is the advantage of fiberated coating?

@KARNAKroofcoatings 3 жыл бұрын

Non-fibered aluminum coatings work well over metal roofs and roofs that have been previously coated with an aluminum coating. Fibered will be stronger and more resistant for longer, but will cost more for the material.

@bobbymancini9069 2 жыл бұрын

Can this be thinned to be used in a spray rig?

@KARNAKroofcoatings Жыл бұрын

We would not recommend thinning the product at all as that would push it out of the approved specifications. We do have a sprayable version of some of our other reflective coatings, like our Silicone 670HS coating.

@12Radius 6 жыл бұрын

Can you put non fibered coating over the fibered coating ? thanks

@KARNAKroofcoatings 3 жыл бұрын

Yes, you can do that

@SlawKingOG 2 жыл бұрын

can Karnak 97 be used for TPO roof or Karnak 298 ?

@KARNAKroofcoatings 2 жыл бұрын

No, aluminum coatings should not be used on single ply membranes. Some better alternatives would be our 502 system.

@alterbr33d 6 жыл бұрын

Would this help keep a car cooler than metallic white car paint?

@KARNAKroofcoatings 6 жыл бұрын

It is not recommended for application on vehicles. But to answer your question, white coatings are typically cooler than silver coatings.

@TaiwanBobby 3 жыл бұрын

Run it

@shure46 2 жыл бұрын

DO NOT PAINT YOUR CAR WITH THIS STUFF !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! C'mon

@davidmckee1676 6 жыл бұрын

Can it be applied to a vertical surface?

@KARNAKroofcoatings 3 жыл бұрын

Yes, it can be applied to a vertical surface.

@takkikayo 10 жыл бұрын

how many years this coating will last?

@KARNAKroofcoatings 3 жыл бұрын

It should last 7 to 10 years based on a few factors

@jonnyappleseed2282 6 жыл бұрын

Definitely not going to spray fiber out of an airless no way false information

@KARNAKroofcoatings 3 ай бұрын

Huh?

@mediocre923 6 жыл бұрын

How many coats?

@KARNAKroofcoatings 3 жыл бұрын

Just one coat is necessary!

@fuckgoogle4704 9 жыл бұрын

Whats the reflectance %?

@KARNAKroofcoatings 9 жыл бұрын

Initially, it is 63%, and after 3 years' weathering, it is 55%. If you are looking for an aluminum coating with higher reflectivity, check out our 298 Alumin-R (kzfaq.info/get/bejne/iZ11fc-oxNfQj4U.html). For even higher reflectivity (in the 80-90%), we have acrylic white coatings (listed as 501 and 501). Hope this helps! Feel free to call our Technical Dept at 800.526.4236 for more information.

@jonathanrivas6718 5 жыл бұрын

How much would it cost me to do a 2900sq flat roof?

@sixmagpies 4 жыл бұрын

@@KARNAKroofcoatings I have a NEW 2000 ft2. and presently uncoated solid concrete slab roof in equatorial area Is this an appropriate product for that roof to seal it, as well as reduce heat absorption?