Couldn't of said it better myself! We have to keep pushing and supporting everyone to keep it all alive!

Thanks for the support! Means alot, especially if I can motivate and help others with there own projects!

Thanks man!

Thank you!

MazdaMini Garage do you have any more videos on you truck i have a similar one but haven't touched it since ive bought it.?

Awesome!! Thank you

+Cjw Cjw no problem. I will be releasing a video when I do the back and then the air management.

scrappingpavement Did you see my convertible pickup truck on Instagram?

cjw cjw whats your IG name so I can see your convertible truck

Sebastian Cruces it is: UpClass Upholstery by Cleodis

+Lawrence Duarte thanks Lawrence! In the future I'm going to be releasing Mazda and toyota parts as well!

scrappingpavement ok sweet I'll make one if I get to it before you release them. Thanks for the reply

Thanks, I have stopped making control arms until further notice.

Thanks

For sure future video!

Should have some videos of my pops 67 gmc in a month or two

Most definitely!

Sweet! Thanks for watching ❤

Lmao! 22s and body drop on the f100 first

Your f100 or mine? Mine doesn't need it and currently has 19"s on it, I'm planning on selling it that way.

There just your basic 1" spacers. Think I got them off amazon

I've reused the factory torsion bolt on several trucks including this one with no issues. Just use a pair of vice grips to hold it while I tighten the lock nut.

It rides very nice compared to being static dropped. The back bag setup is slightly stiffer because it's set up for weight handling but if your cruising low with air it's a very nice ride compared if you were cruising low with a torsion drop and drop blocks in the back.

I've heard 4wd uppers are longer, beebanicustoms used to make adjustable uppers not sure if he still does or not.

+Kyle Irwin yep. Instead of bag plates you would need coil mounts.

It still has stock turning radius.

They don't offer much to lift hardbodys, rough country has got a kit. If you want to go big lift you will need to do a straight axle swap. I got universal bag kits on my website www.rohdefabrication.com

I dont have any video I'm particular that goes over this. How I do it is figure out your overall wheel amd tire height or mount your wheel amd tire, and jack it up until the bottom of the tire is flat with the frame. This is where you'll mount the bag at full bump which is typically 3", after that you'll just want to make sure you mount the bag as close to the frame as you can without it touching. This is important because you'll need as much room on the other side of the bag to be able to lift all the way up, and bot rub your bag with the spindle while turning. If you google "project body bagged" it was a 3 episode series on the show trucks where they bagged a nissan hardbody and they have a ton of great tips in that video series. Hope this helps!

+Cuttinthruchaos This is a great question! So first off I recommend having at least seperate air lines to each front bag, because if it was a teed line if you blow a bag or line both sides would lose air. As far as an emergency tools here's what I would recommend,,,, union push to connect fittings, Teflon tape, Schrader valve, wrench, small scissor jack. Worst cast pull the bag out and shove a large solid object in there to hold the truck up like a 4x4 piece of wood for example, then just limp your way home.

scrappingpavement thanks for the reply. Also, great video! Yeah, that’s always the biggest worry. Not so much for the rear, but the unforeseen things that can happen in the front, or the wear and tear on the bags. Keep posting your videos. They’re the most informative ones of seen yet that are this in depth concerning air ride!

Ive never worked on full size chevys, so youll have to do some looking around to see what others have done.

I make everything besides the triangulation kit, currently working on a new version of the triangle kit.

@@scrapingpavement gotcha ya I looked again and I saw everything any idea when you may have it available not in a rush or anything just curious

+Exposing The fake ones 17" nissan titan factory wheels. Not sure of tire make but there 195/40/17

+Truck build and tool review it will come with bolts for the new bushing haven't decided on a new lca bolt yet.

Thanks, i set the uppers to match the lower control arm angle layed out. For example if the lower control arm layed out is 20° ill match that angle with the upper bag bracket said 20°. That way when the truck is sitting on the ground all the way aired out the bag is squished evenly. Hope that makes since.

@@scrapingpavement ok yes it makes sense thanks a lot !

We no longer offer upper control arms. They are not necessary for the other kit. We do offer an upper control arm filler kit, which allows you to flip your control arms upside for better bag clearance and ball joint angle.

I have bell tech drop spindles

Oem to the truck 86.5

I'm running 1" spacers to get a really close fitted look

offset bushings?

Brand isn't terribly important, I would just recommend a 220V welder of some sort. A 110v welder could work but not recommended.

+xXIBON3ZIXx lincoln 180hd

No bolt on bag kits for these trucks or pretty much any mini truck. Theres some bolt on kits for the chevy s10

Completely up to you, I think the main reason that is done is because there trying to get a better bag angle when the truck is aired up. But I dont like how the bag sits when compressed because it squishes the bag at a wierd angle amd could cause a rub spot, so that's why I choose to mount mine flat. on the arm.

@@scrapingpavement Thanks bud i appreciate it.. Keep up the good work iv been following on instagram as well ready to invest in some of your product

At the moment nothing for the 720 hit hopefully in the near future. Https://www.rohdefabrication.com

Not the best with the nissan wiring harness myself I try to avoid messing with it. But the bagged on 20s build I'm doing i have to mod the harness so you can see what I do with that in a couple of episodes.

@@scrapingpavement how did u re mount the fuse box and battery with out cutting? Can u show me some pics please im going crazy over thinking it

My truck only needed small tubs so I was able to raise the wiring up. Send me an email blazingcustomz@hotmail.com and I can show you what I did with the blue truck

If you run a really small wheel and tire combo you can potentially not have to cut the wheel wells.

Only if your riding low lol

Not going to lie I miss those wheels....text me sometime I lost your number lol and I'm off social media.

Have you ever seen custom airbag lowered front end on 79 Chevy luv?

17" oem nissan wheels. You can find them on the armada and titan.

Yes

Check my website out www.rohdefab.com

+Cortez Otis no but I may have too. I've had a couple people ask.