Hey Joshua, pretty sure that’s my drone! Sorry for all the inconvenience, I had no idea I messed up the FC that badly! I sent you a PayPal donation a while ago to hopefully make up for it. Cheers and thanks for helping me!
@JoshuaBardwell Жыл бұрын
No worries at all man! It was a fun project! I appreciate you donating it so I could make this tutorial.
@Masu... Жыл бұрын
Hey! I have same problem. I messed up my drone :) Guy from local drone service bring it back to default. Then 3 times connect and disconnect battery and drone goes pairing mode...
@Azreeel Жыл бұрын
Something to add: the version of beta flight you have flashed is very important if you have an spi receiver. If you are on 4.4 then you will be on ELRS 3.0. If you are on 4.3 then you will be on ELRS 2.0. The lite radio only supports ELRS 2.0, so make sure your receiver is flashed to 2.0 (or you have the right betaflight version if you have an spi receiver).
@Sugalime3D_FPV Жыл бұрын
Yeah and i have a drone with an ELRS receiver (BETAFPV SuperD) on UART. And that receiver has ELRS 3.0 as default. Supposedly, such receivers cannot be downgraded from 3.0 to 2.0. I haven't tried it yet. But somehow funny and an outrage that I can't bind a new BETAFPV ELRS receiver with a new LiteRadio3. This is really incredible...
@Sugalime3D_FPV11 ай бұрын
It seems there is now an ELRS V3 update. However, still a candidate. So do it at your own risk. But this shows that a stable ELRS V3 will definitely be possible or perhaps already is... BETAFPV would have had to do that no matter how if they wanted to keep their remote compatible with new products...
@chantryholdman372010 ай бұрын
@Sugalime3D_FPV I tried the 3.0rc1 firmware and now connecting to the betafpv configuration software the com port no longer shows... has any bound this TX to a pico?
@Sugalime3D_FPV10 ай бұрын
@@chantryholdman3720 i think i had the same issue and coukd not update it. So maybe i understand something wrong or it does not work with my setup... My solution for now is to wait a little bit before i try again...
@freak33a2 ай бұрын
@@chantryholdman3720same issue here, basicly bricked the controller that way.
@AchronTimeless Жыл бұрын
I found the easiest way to bind my Lite Radio 3 was to buy a Jumper T-Lite V2
@istim Жыл бұрын
That’s funny I found similar results by buying a TX16S… in fairness to the Lite Radio 3 it probably shouldn’t be expected to do anything as challenging as actually bind to a quad! Sadly it doesn’t even make a good door stop
@scu-dub Жыл бұрын
I have a lite radio 3 elrs and I had the same problem with the channels jumping around I fixed it by going into Betafpv configurator and changing the channel inputs then I had another issue with the throttle roll yaw ect ect not matching up I fixed that by changing the channel mapping in betaflight and it worked fine i had to do this with 2 quads though however binding was as easy as pressing the binding button on the radio and using crsfr in betaflight hit bind and I was in business 👍🏼
@JustARandomGuyyyyАй бұрын
I'v tryed to change inputs but still not works
@exiledfpv Жыл бұрын
BetaFPV was my introduction to FPV. Ironically, you put this video up on a day when I was struggling to bind a new Cetus X to a LiteRadio 2 SE. My issue was different though and I was lucky I caught it (since I'm still a noob to all of this but I am definitely learning). Connecting the controller to the BetaFPV configurator, the internal module had gotten turned off (I've never owned or used an external module). As soon as I turned the internal module on, it bound without any issues.
@grahamashby2111 Жыл бұрын
How do you turn the internal module on?
@exiledfpv Жыл бұрын
@@grahamashby2111 Using the BetaFPV configurator (not Betaflight), connect the controller and on the setup page, it's in the second section titled 'RF Module Setup', the very first option is for turning your Internal RF Module on or off....switch it to 'on'.
@brianbutler49693 ай бұрын
Thank you for not editing. Learned from it.
@poopfacekillah69 Жыл бұрын
My question is, can you update the elrs to 3.0 on the radio lite? I can't find any information on that.
@W1rbel Жыл бұрын
Not for now, only literadio 3 pro, which uses regular edgetx. See betafpv github issues.
@BatzBenzerFPV Жыл бұрын
@@W1rbel link to this issue plz...
@W1rbel Жыл бұрын
@@BatzBenzerFPV youtube deletes the links... #7 issue in LiteRadio_PLUS repo
@janozako5 ай бұрын
hello one problem, I don't have this"bind reciver" button in betaflight? Can you help me :)?
@fparkes610 күн бұрын
Neither does mine. Did you ever find the issue?
@mercurymoyes4018 Жыл бұрын
Thankyou for this jb it confirmed I know nothing and messed up the last couple of quads I tried lol to bind like the blind leading the bind! Having no computer makes it harder in some ways.. Its on the list after a few more drones. Thankfully a local nz quad shop @kiwi quads sorted our emax quads with same issue-the boy who opened the clock ,and they were honest and said they hadn't been bound correctly and one had come unbound! They really could have tucked us hard saying I'd fryed this and that and I'd have believed them. So nice to see there are still good humans doing business! Now to send them our betafpv Cetus and beta3" fingers crossed but I'm definite in need of a new radio!
@sunsetpark_fpv Жыл бұрын
LMFAO JB I just went through a similar headache this past weekend with my Meteor75. I am referring to the CLI dumps and Hex files on the website - they were useless. Luckily I had done a "dump all" and "diff all" before I started, and was able to comb through them for relevant data. I then opened the quad and checked the hardware to confirm which FW was needed on the AIO. Installing BF 4.4 solved my headaches. It was a very frustrating 2 days or so. I feel your pain.
@tripletakaoren6328 Жыл бұрын
Rapidly unplug the drone three times until you get a double flashing green, then hit bind on the controller and boom. That’s how I did it.
@user-hi5quadxplorer6 күн бұрын
Can you please make a video about the RM Pocket ELRS on building binding phrase. I know everyone else has one but you explain things in way that I actually learn and you don't waste time telling dumb little stories like others. My SD card won't get a read on any computer in my house (3) and the radio works still bound to my one quad but I can't download it to my SD. What can I do please?
@Fozzedout Жыл бұрын
I went through this pain a month ago. Except there was no connection. Ever. I gave up and bought a Radiomaster TX12 instead. Seems that ELRS 3 support was needed, which that controller does not have.
@W1rbel Жыл бұрын
Betafpv seems bit uncomfortable to use sometimes and touching a lot of issues, but this comes from the wideness of product line and integration level. Finding something like default firmware or settings for less popular customer and product usually even more disgusting. For now, there is the one issue about betafpv impacting me. Elrs 3.x was not ported to literadio yet (work in progress afaik), making you unable to flash betaflight 4.4 and even some minor 4.3 to spi boards, cause this versions already migrated to new elrs, incompatible with previous. Even so, im not 100% sure this issue should be resolved only from betafpv side. See: with betaflight 4.4 you have support for flysky, spectrum, and other ancient spi receivers, but dropped elrs 2.x - why shouldn't it be still available alongside with 3.x?
@HPgamesHPgmes3 ай бұрын
Hi Joshua, What receiver should I buy to fix on HGLRC sector 132 4K PNP version when I have the betafpv ELRS radio already. can you please recommend me one exact reciever to buy please. I'm new to the hobby and live in India. Please advise me a video link to solder the things in a right way. Thanks
@prostheticconscience6707 Жыл бұрын
A few months ago I bought a DarwinFPV AIO 1-2s FC with SPI ELRS onboard, which used this exact firmware. I went through about as much trouble to bind it as you just did.
@user-yc3of7sx3j11 ай бұрын
Have you tried binding it to the BetaFPV Radio Lite 2.0?
@andrewfoster7325 Жыл бұрын
OK---same thing happened to me. Would not bind so I contacted BeataFPV. They said hit the bind button on the radio and plug and unplug quad 3 times leaving it plugged the 3rd time---it did bind but still won't fly. Motors arm for a second the spin out of control. In my case a waste of $109.
@JoshuaBardwell Жыл бұрын
Number one cause for that in a bind n fly is you installed the props wrong.
@andrewfoster7325 Жыл бұрын
The props came installed. It was BNF.
@Jacknoham10 ай бұрын
How do I get the configurator?
@DustStep8 ай бұрын
After purchasing the Cetus x RTF Elrs version, I lost my drone in the reed forest. So I bought a new BNF, but it didn't bind to the Literadio3 controller, so I watched this broadcast. I tried to connect to the Betafpv configurator, but even if I tried to connect with the power off, the serial port kept turning off in loading. Please let me know how to fix it
@ikesparrow24907 ай бұрын
just got this drone and it will not bind with lite v3 remote. also the reciever remains in uart and crsf. i can use any help.
@pheonix2160Ай бұрын
Unfortunately the latest version of Beta Flight has removed the Bind Receiver tab.
@junktheАй бұрын
I can't bind Betafpv LiteRadio 2 SE to my old D8 frsky RX 4channel V8R4-ii, maybe you can explain ?
@KCQuadTronX Жыл бұрын
THANKS FOR THIS GREAT VIDEO AND SO MANY DETAILS
@fabiankocieba Жыл бұрын
How do you bind the literadio 3 pro though
@thiagOrloski2 ай бұрын
Firmware update was interrupted and my Radiolite 3 no longer turns on, but the USB emits an unknown hardware signal in win11
@JamesTsang-be4cf6 күн бұрын
Hi Josh, can you help me bind my Air75 to my lite radio 3? I copied and pasted the bind phrase from betaFPV configurator to betaflight and I’m getting an error lesson in CLI: error in set: invalid name (then the copied code) I can bind my Cetus X to the radio no problems using both your methods but tried with Air75 and I’m getting nowhere ☹️☹️ please help!
@Sugalime3D_FPV Жыл бұрын
I'm very unhappy with LiteRadio3 now. It has ELRS 2.0.1 (from December 2021 !). And there is no ELRS update for the LiteRadio3. So you can't use new ELRS receivers (for example BETAFPV SuperD ELRS receiver on a 5 inch quad) or ELRS SPI receivers with a higher Version of Betaflight than 4.3.
@Sugalime3D_FPV11 ай бұрын
It seems there is now an ELRS V3 update. However, still a candidate. So do it at your own risk. But this shows that a stable ELRS V3 will definitely be possible or perhaps already is... BETAFPV would have had to do that no matter how if they wanted to keep their remote compatible with new products...
@BatzBenzerFPV11 ай бұрын
@@Sugalime3D_FPV Where can i find it?
@Smagsfpv Жыл бұрын
I actually was wondering if I had the Cetus X kit if I could use the controller with that drone or other elrs drones. I think I learned something today 😃
@JonR35 Жыл бұрын
The lite radio 3 pro elrs you use elrs configurator. My problem is binding my lr3pro to my rekon 4LR with sbus elrs and not spi
@stevegigg60664 ай бұрын
Should my LR3 bind to sub250 nano20 via betaflight or betafpv config ? I’m dying out here 😢😊
@kalciferus4792 Жыл бұрын
and at the expense of manual connection, I don't have a "bind reciever" button in byteflight
@jimbo_bp8309 Жыл бұрын
Hey guys I bought an Eachine novice 4 a few months ago, and I’ve had a range of issues with it so far from screws that won’t come out to faulty batteries, after soldering a wire back in and going out to fly the goggles were disconnecting when I armed it, just the feed not the fps information, and I took the drone out today and the goggles basically don’t connect at all, they show twitches of the image but other than that nothing, just the gps information . Any help on the issue would be greatly appreciated Thx 🙂
@FunkySwanson5 ай бұрын
Bind button doesn't work. Great tutorial..
@gsgsgsgs36503 ай бұрын
None of my betafpv products connect with betafpv configurator. What am i doing wrong? I've tried 4 different computers and have the same problem with them all. PS I'm ready to subscribe to your patrion if you can help me.
@blaydgs Жыл бұрын
Hello, great video, I bought this one with elrs system, can I modify it to Frsky without buying modules? Only in the bind as you are showing?
@minusdream440 Жыл бұрын
i update to the hall gimball is quite better now actually is my daily driver from 1 year
@Bossbmx Жыл бұрын
I have a crux35 hd v2 uart elrs and a literadio3 and cant bind them im reading about elrs 2.0 and elrs 3.0 i have a boxer on order but thats not going to ship for another month and its my 1st vista quad so im really looking forward to trying the digital system please tell me there's a way to bind them or im going to have to wait a month min to even try it😢. Also my crux35 came with a polar nano weirdly too thanks Jason
@gaylekakac31310 ай бұрын
I think my Meteor 65S is bound to my BetaFPV Lite 2.0 radio as I see the throttle, pitch and yaw move in BetaFlight Conf. But when I disconnect it it doesn't arm. Any thoughts?
@petrokey Жыл бұрын
I can get elrs byte code (thank your spi elrs video), but how can I convert it back to word?
@JoshuaBardwell Жыл бұрын
You can't as far as I know. It's a one way hash.
@grahamashby2111 Жыл бұрын
I have a 2022 meteor 65 pro elrs and a radiolite 3. In order to bind them to I have to use the conigurator or can I just use the bind buttons?
@davidgoodman8996 Жыл бұрын
Joshua, searched high and low have some questions on FPV and looking for some is insight issues. Being vague because posting on KZfaq isn't the best
@JoshuaBardwell Жыл бұрын
You can email jb@joshuabardwell.com
@kalciferus4792 Жыл бұрын
unfortunately it doesn't work that way( I do everything the same, I write this phrase in beta fpv configurator, copy the result to betafpv, but nothing happens after that
@MCsCreations Жыл бұрын
Well, I hope you can at least fly it, Joshua. 😬 Anyway, stay safe there with your family! 🖖😊
@petrokey Жыл бұрын
May bind it to cetus x, but using a pairing word)
@EagleEyeShooting Жыл бұрын
Hey Josh. Appreciate your tutorials. I upgraded my Cetus-X to 4.4.0 to install a future GPS. Having issues with this Betafpv lite 3 radio to bind. Im assuming the ELRS is not updated to 3.0. Is their a firmware update for the remote? Also, unable to update firmware on this remote or it simply wont flash in Windows 11 Betaconfig
@JoshuaBardwell Жыл бұрын
This remote can't be updated to elrs 3.0 I believe so you can't bind it to BF 4.4. You have to stay on elrs 2.x.
@abracadaver7687 Жыл бұрын
Putt battery in plug unplug 3x and bind radio button the 3 time 🤷♂️👀
@petrokey Жыл бұрын
Btw, does this lr3 supports elrs3?
@JoshuaBardwell Жыл бұрын
Not yet. They say they're working on it.
@626jonny12 күн бұрын
Hello I’m new to this hobby and honestly I’m giving up because I bought a hummingbird and a controller that T-Lite Jumper but can’t bind them together. I use 3 of your videos and download beta fly to update the drone for I could bind to the Control, but as I download it better flight to a laptop that I end up buying just for this hobby end up killing the laptop. I took it back to the store. they asked me what did I download and I told him Beta flight they did their test on it and they told me I caught a virus and it killed the laptop completely. So if anyone knows if I could buy a drone & controller kit that’s bind already I would appreciate it. Not trying to lose money on laptop because of software.
@ellisonchan6204 Жыл бұрын
Hi Joshua, can the BetaFPV drones be used with regular ELRS transmitters, like the RadioMaster?
@JoshuaBardwell Жыл бұрын
All elrs hardware is compatible no matter who makes it.
@micbanand Жыл бұрын
thanks for your videos. but please turn your mic settings down a little. it distorts slightly, and therefore sounds very bad :)
@JoshuaBardwell Жыл бұрын
No offense, but are you sure it's not your speakers? My mic definitely is not clipping. The mic gain is very low, like peaking at - 25 dB during normal speech, to avoid clipping. I carefully level to -14 lufs and then I run a hard limiter at -1 dB at the end of my audio chain to catch any transients. I do notice my standard audio level of -14 lufs is louder than most other channels use, so maybe it's causing your speakers to distort. But it's easy to turn down the volume.
@micbanand Жыл бұрын
@@JoshuaBardwell I dont think so other videos sounds fine. but I will have a closer look :)
@devanshshah92748 ай бұрын
How to bind without a configuration
@ЖЖЖЖЖЖЖЖЖЖЖЖЖЖ Жыл бұрын
Аппаратура LiteRadio3 из комплекта Cetus X начала шуметь вертикальной осью левого стика после 10 часов в симуляторе. Вертикаль левого стика сильно дрожит при плавной проводке. Видимо брак потенциометра! Обращался очень аккуратно. Братьев и детей которые могли бы сломать в мое отсутствие нету.
@Mostvisible Жыл бұрын
I just simply want to already knowitall and not have to put my brain through all this learning😖🤣 If it were not for (BSquared of Fpv) Bardwell and Blunty are helping us tremendously.
@brandonw987 Жыл бұрын
I dont think you copied the compete set of numbers and pasted them in the cli. It looked like some of the numbers left off.
@fantasybeast7202 Жыл бұрын
If you did a weekly drone giveaway that 275k subs would shoot tf Up. Let'sGo! #Challenges / entertainments for DroneNerds alongside the avg dude. #GetOutTheNiche
@JoshuaBardwell Жыл бұрын
I give away between $400 and $800 in prizes every month on the new product roundup, and a separate give away on my Patreon every month. I do it because I want to give back. Realistically, giveaways are a bad way to get subs. People sub only because they want the prizes and then don't watch your content. It inflates the sub number but has no actual value.
@fantasybeast7202 Жыл бұрын
@@JoshuaBardwell #MoreMarketing!
@mercurymoyes4018 Жыл бұрын
@@JoshuaBardwell prizes bring the scammers out like flies ,kinda sux I like giveaways but I don't trust half the web sadly why I don't have PayPal and got rid of my debit card..now shits hard to do:(
@fisioclinicacm Жыл бұрын
Definitivamente esto no funcionó para mi teniendo, una literadio 3 y un modulo externo nano elrs de betafpv. Actualicé mi cetus X a la 4.4 de betaflight y el modulo externo nano TX a 3.x de elrs y no funciona y los controles en betaflight estan bloqueados, sin embargo en betafpv configurator van a la perfeccion... Asique he decidido vender la literadio 3 y comprar una radiomasterzorro para tener mas opciones de actualizacion y de modificacion de parametros. Definitivamente la literadio 3 no es recomendable si quieres profundizar el mundo del FPV.
@Sugalime3D_FPV11 ай бұрын
It seems there is now an ELRS V3 update. However, still a candidate. So do it at your own risk. But this shows that a stable ELRS V3 will definitely be possible or perhaps already is... BETAFPV would have had to do that no matter how if they wanted to keep their remote compatible with new products...
@BatzBenzerFPV Жыл бұрын
literadio with ELRS module does NOT work with ELRS V3... Only V1... Confirmed by BETAFPV... Returned...
@W1rbel Жыл бұрын
Nop. i'm flying elrs version 2 actually
@Sugalime3D_FPV Жыл бұрын
@@W1rbel Mine is at 2.0.1. BUT the newest ELRS reciveres (BETAFPV superD, and a DarwinFPV ELRS receiver taht was with my drone)) I have bought have ELRS 3.0. BETAFPV shame on you that my LiteRadio3 doesn't work with these receivers yet. Thus, the LiteRadio3 is really rubbish at the moment! According to a KZfaq post, 3.0 receivers cannot be downgraded to 2.0 either...
@Sugalime3D_FPV11 ай бұрын
It seems there is now an ELRS V3 update. However, still a candidate. So do it at your own risk. But this shows that a stable ELRS V3 will definitely be possible or perhaps already is... BETAFPV would have had to do that no matter how if they wanted to keep their remote compatible with new products...
@BatzBenzerFPV11 ай бұрын
@@Sugalime3D_FPV great. thanks..will test it soon. it will be a sim controller for a kid, so I will have no dramatical impact, if the radio link sucks.
@Sugalime3D_FPV11 ай бұрын
@@BatzBenzerFPValso put the BETAFPV hall gimbals on it. After 7 months my poti gimbals was defective... The good thing is, it's easy to change.
@Editer38738 Жыл бұрын
I've tried with no success Cheers from Knoxville
@ShawnEngland Жыл бұрын
This is painful... Why would anyone choose to support a company that does this?
@ssgllc7007 Жыл бұрын
Me. Because I bought the Cetus x kit before any binding tutorial. It honestly wasn’t All that bad. Might be a good option for a kid, if they have access to a laptop that is. The drone is absolute trash, and the tune is crap. Constant desyncs I think, falls out the sky on sharp turns.
@W1rbel Жыл бұрын
@@ssgllc7007 Yep, cetus is a separate pain... tended to be easier in use than others, but... fpv hobby is not something that easy to make easier
@CodedGames Жыл бұрын
Unfortunately everyone watching this video probably already owns a BetaFPV LiteRadio, but if you haven't and are thinking of getting one, don't. It's literal trash. And my experience is almost everything BetaFPV makes is also garbage. The fact that you need a dedicated video about how to bind a radio and a bunch of problems happen show that BetaFPV's products are terribly designed. It's ELRS, it should work like every other ELRS product but doesn't because BetaFPV thinks they can do it better but ultimately does it way worse.
@JoshuaBardwell Жыл бұрын
For the record -- and I think I was clear about this in the video -- the problems in this case were because the guy who owns this quad couldn't get it to bind and did all kinds of crazy things with the config and flash and messed it up. This one is NOT betafpv's fault.
@CodedGames Жыл бұрын
@@JoshuaBardwell I don't think you should entirely blame the guy. If you check reviews on Amazon for the Meteor BNFs you'll see a bunch of other people saying that the firmware was broken. I even bought a Meteor65, did not mess with the firmware and had the same problems shown in the video. At the time I didn't find a solution so I just returned it on Amazon. I've just had nothing but bad experiences with BetaFPV products and since many of their products are marketed toward new pilots I think it's good to steer people toward other companies (had good experiences with iFlight, Happymodel). Besides software issues the LiteRadio 3 has horrible durability. Everyone I know who's had one has had the gimbles randomly start freaking out after 1-2 months of use. The Zorro is so much better
@truckgurry4921 Жыл бұрын
I have exactly same issue but not with beta fpv but with jumper t lite v2 My betafpv lite radio 2 bound no problem
@FunkySwanson5 ай бұрын
Betafpv sucks. I can't get this trash to bind to my drone. I have no clue how to figure out what is wrong. Fpv community is toxic on reddit.
@freak33a2 ай бұрын
With elrs 3.0 it got even worse - now you need betafpv configurator 2 and once you managed to update the literadio 3 to elrs 3.0 usb is not working anymore. Dont ask why. Also it will only bind to one of the recievers i tried so far, all on 3.3.0...
@ZenoMinus Жыл бұрын
I tried LiteRadio last year I don't recomand this radio to anyone, I had keep recalibrating the sticks and is so unprecise
@GardoRotor Жыл бұрын
If you like to punish yourself use a lite radio. Lol
@W1rbel Жыл бұрын
literadio 2/3 still most compact rc transmitters with integrated antenna. Also highly likely literadio 2 forms was stolen by (great and terrible) jumper t-lite. While literadio was copied from xbox controller. While literadio 3 looks self-designed. While jumper t-pro stolen again from dji. Lol
@CDRaff Жыл бұрын
Why did I watch the whole video for a quad I don't nor will ever own?
@sunsetpark_fpv Жыл бұрын
Because you learned something today :)
@CarbonGlassMan Жыл бұрын
Quick, learn how to bind it before the gimbals stop working.
@JoshuaBardwell Жыл бұрын
You're not wrong
@CarbonGlassMan Жыл бұрын
@@JoshuaBardwell I wish I were. I got 3 weeks out of the V1. 2 weeks out of the V2. Not even going to try the V3.
@BowOneFire Жыл бұрын
@@CarbonGlassManif you upgraded to the hall gimbals it would last years though
@istim Жыл бұрын
@@CarbonGlassMan the gimbals in v3 I had didn’t even work out of the box….
@CarbonGlassMan Жыл бұрын
@@BowOneFire I considered it, but the price of the gimbals was about what the radio was, and the only reason I bought this radio was to have a very inexpensive D8 radio. So instead of buying upgraded gimbals, I bought the V2 radio for a few bucks more than the price of just the gimbals. I'm happy with BetaFPV's receivers, their 2.4 and 915mhz modules, but their little radio turned out to be a waste of money.
@J.D.Vision Жыл бұрын
Oh, they're selling a white one now? 🤷Cool, I guess!
@borisdamole Жыл бұрын
White is the old one, black with a screen is newer
@Kmart_FPV Жыл бұрын
Oh BetaFPV…Why are you the way that you are?
@macofish1Ай бұрын
I click connect and the button stays blue and won't connect.
@Cvft9929 күн бұрын
same thing happens to me, were you able to figure it out?
@macofish129 күн бұрын
@@Cvft99 Yes! A different computer and then there was no USB conflict which I d/l all the "suggested" fixes. Try a different computer or google USB fixes first, (which didn't work for me). Once the other PC was able to "Connect" I assigned the bind phrase and saved. Then in betaflight config I assigned the same bind phrase and now it works everytime. I can explain further or give you a video if you need help. Cheers.
@tacticalFPV Жыл бұрын
They could totally just put a standard Elrs RX on that quad, makes zero sense to do what they do.
@JoshuaBardwell Жыл бұрын
Not exactly. The SPI receiver saves the cost and board space of the ESP chip, which is significant.
@tacticalFPV Жыл бұрын
@@JoshuaBardwell I guess I’m talking about the bigger picture, the cost of maintaining software to do a job that other software already does and does a much better job of doing. My personal experience with this exact equipment was the FC getting bricked by betafpv config when updating to match the controller firmware, and betafpv refusing to exchange for another. So i foolishly bought another and it wasn’t recognized by betafpv config. It’s dodgy software that they need to either ditch or put a lot more money into, or just put a regular RX and call it a day.