How to boost, recover or fix your older nicad, mnhi batteries with a small bulb.

Рет қаралды 14,640

Жыл бұрын

This is an easy way to boost your old batteries to get more last out of them. All you need us a bulb, 24v bulbs work best.
Never hook a bulb up direct to a lithium battery. As this will distory a new type lithium battery.
#tools #repair ##deandohertygreaser ##powertools #fix #diy #carpenter #makita #bosch #boschtools #battery #batteryfix #batteeyrecovery #nicad #oldbattery #oldbatteryrepair

Пікірлер: 26

@Mark5mith 7 ай бұрын

Good tip for reviving nicd's nimh , it's one of the reasons RC chargers have that function built in, some of my rc batteries aren't used for ages, ive got an old 20 volt Dewalt sds i may not get an adapter for, this keeps it goin, cheers Dean.

@steorris Жыл бұрын

Knowledge is power 👍🏻

@conwaynoel3715 10 ай бұрын

Just subbed Dean great vid . I have a few nicad that don't work and the tools do . I think the Li converter looks like the solution. Thanks again from Galway.

@boberson83 9 ай бұрын

I always thought those lights that came in those old combo kits where just thrown in as a cheap extra to wear our your batteries. Turns out they have a use after all

@sbromose1 5 ай бұрын

Hello. I enjoy watching many of your videos. I have something to add about NIMH cells. Yes, it is older technology, but has improved a lot over the years. I have NIMH battery cells from Panasonic that keep the charge for years, even some Hybrid cars use NIMH as they have li-ion similarities today. What kills NIMH is too low volts per cell, not below 0.9V. No battery cell like to be discharge completly. Nimh is better in cold weather, but the energy density is somewhat less than Li-ion. There are advantages and disadvantages to all types of batteries. I'm not a big fan of li-ion as they are fragile and NIMH is more forgiving.

@peterthebricky 7 ай бұрын

Adapters great I've got a couple of makita to ryobi well handy

@efektmurowany Жыл бұрын

Thanks!!!

@mrtrump-pf1nx Жыл бұрын

Good stuff

@rottiejakeluke 6 ай бұрын

Thank you for the video. Can you please send me links for the bulb, the bulb holder and also the commercially built unit which does the same as the bulb with the charger combined in the routine. Thanks.

@blueback21 4 ай бұрын

Can you plug the battery into your drill and just run it until it dies or does the bulb trick need to be done?

@koicarp0 4 ай бұрын

Hi Dean. i have the identical drill with the same problem, as new but battery charges in 5 mins, and doesent last, im out to buy some 24v bulbs, Thanks Very Much much appreciated

@donien3113 Жыл бұрын

Best place for adapters? Have a few old dewalts and Makita that I'd love to get going on Lithium

@HDXFH Жыл бұрын

Ebay

@stevenbauman3501 Жыл бұрын

Love your videos. Where do you get your parts?

@fordford9133 10 ай бұрын

Tesco or Aldi

@nathanhuitson1418 5 ай бұрын

What watt bulb does it have to be? Many thanks Nathan

@MsMad555 7 ай бұрын

Zlyszalem o wkladaniu do lodówki że to ma zniszczyć nalot na elektrodach katoda o anoda i ożywić baterię ale o tej żarówce nie słyszałem że zrobi to samo!

@johnmorrissey1675 5 ай бұрын

,👍

@doctorlefthandthread Жыл бұрын

Are there any devices to cycle lithium batteries?

@jaywelker5566 Жыл бұрын

the same imax b6 he showed in the video can do basically any battery chemistry.

@doctorlefthandthread Жыл бұрын

@@jaywelker5566thanks

@SnekSnack Жыл бұрын

Well, cycling works only for NiCd/Nimh. Li-on don´t have memory effect. Cycling Li-on battery won´t bring more capacity. Li-on lose capacity with use (charging/discharging), also when they are below 2.5V. When they are below 2.5V, their internal resistance rise (they can´t provide designed current), they lose capacity rapidly and will self-discharge faster, when charged.

@doctorlefthandthread Жыл бұрын

@@SnekSnack I usually discard cells when they are 2.5v all that you said makes sense

@SnekSnack Жыл бұрын

@@doctorlefthandthread When they are 2.5V - They can be charged back maybe without damage. Damage happen, when they sit low below 2.5V (2V, 1V or discharged to 0V).

@johnmorrissey1675 5 ай бұрын

Knowledge is power 😊