How to Build a Four Drawer Dresser

Рет қаралды 90,352

Күн бұрын

Step by step how to build this dresser. It's not that hard to do. You can build your own and just adjust the size to your own needs.
Comments or questions My email is:
PawPawsWorkShop411@gmail.com
This channel in part is funded by viewers like you. Please help me continue to creating videos by becoming a patron.
/ pawpawsworkshop
Donate via Paypal to help me purchase a new jointer. I've never had one.
www.paypal.me/pawpawsworkshop
Link to Laser: jtechphotonics.com
Link to Z axis and CNC machine kits and parts for DIY CNC
cnc4newbie.com
Demon Controller By Designs by Phil:
cnc4newbie.com/store/en/demon...
WOW! 15% OFF offer. Used the code below to take advantage of this fantastic offer.
Affiliate Link to Purchase STARBOND GLUE:
15% OFF PROMO CODE pawpawsworkshop15
www.starbond.com?rfsn=2376834.ca9c16
_______________________________________________________________________________________________
AMAZON AFFILIATE LINKS:
As an Amazon affiliate I earn from qualifying purchases:
Link to My Amazon Affiliate Store:
www.amazon.com/shop/pawpawswo...
Frequently needed supplies:
Replacement brushes for DeWalt 611 Router: amzn.to/2Sknovz
DeWalt 611 Router: amzn.to/2Sp7H6l
90 degree v-bit: amzn.to/2WspRDf
60 degree v-bit: amzn.to/2sYTK0k
Freud bottom cutting bits: amzn.to/2H30R00
Router Bit Set: Router Bit Set 1/4" Shank: amzn.to/2G4iQDH
Oramask 813 12"x10' Roll amzn.to/2VrrUe5
Oramask 813 12"x20' Roll amzn.to/2ViovxQ

Пікірлер: 108

@emilylor5328 10 ай бұрын

Upon unboxing, I was immediately upset at how the rails were very noticeably bent. But I kept going, all tools needed to assemble were included kzfaq.infoUgkxqtX4Dxs6aecAZEuz6GY5-d81YecKCshn and I had it set up in about 30 minutes. Honestly I love this thing, make sure to read the measurements and measure your space so you know if it'll work for you. I bought this to put inside my closet, underneath where I hang my clothes and it is absolutely perfect! It is VERY sturdy and all drawers glide easily and mine are stuffed, and they are still flush when closed.

@PawPawsWorkShop 10 ай бұрын

Thank you so much. I appreciate you watching

@wachinegercun Жыл бұрын

hello,, i´m thinking too much how built a chest of drawers for the closets of my boys, i´m not carpenter and your video encourage you to build mine, looks simple, no need to much tools, and my wife said "you're finally going to make them" (LOL) Thanks for your videos Greetings from Cancun Mexico

@PawPawsWorkShop 11 ай бұрын

You got this. You can do it. This is a simple build that does not required special tools. Thank you so much for watching my videos.

@Grassmonkey1978 3 жыл бұрын

Thanks for the video my boys will like the dressers I’m going too build for them this week

@PawPawsWorkShop 3 жыл бұрын

That's awesome! Have fun!

@buddykennedy8786 3 жыл бұрын

Very well explained. You went slow and didn't speed through the project. I've learned a lot, thank you.

@PawPawsWorkShop 3 жыл бұрын

You are welcome!

@richardhyman6981 3 жыл бұрын

Looking for Chest of Drawer ideas so thanks for sharing this.

@PawPawsWorkShop 3 жыл бұрын

You are so welcome! I'm glad that you found this channel.

@notaflightmedic 3 жыл бұрын

Thanks for all your effort. I have learned so much from your videos.

@PawPawsWorkShop 3 жыл бұрын

You are very welcome. I am so glad that my videos have helped you. Thank you very much.

@playsball 2 жыл бұрын

Great video, thanks for sharing!

@PawPawsWorkShop 2 жыл бұрын

You’re very welcome

@michaelegarnerwolfgange5656 2 жыл бұрын

I love your work

@PawPawsWorkShop 2 жыл бұрын

Thank you very much!

@Gamgan 4 ай бұрын

Loved the step by step

@PawPawsWorkShop 4 ай бұрын

Thank you very much

@TheFlanman10 3 жыл бұрын

A lot of good tricks in here!

@PawPawsWorkShop 3 жыл бұрын

Yes, I try to include as many techniques as I can

@AngieWilliamsDesigns 3 жыл бұрын

This is a great build. Thanks for sharing. I don't know why KZfaq has changed things. But as soon as I saw your video pop up I was thinking... I haven't seen him in a while.

@PawPawsWorkShop 3 жыл бұрын

Welcome back! Make sure you hit the notification bell. It is crazy what is happening in the KZfaq world.

@zacharywalley4679 2 жыл бұрын

Cool stuff

@PawPawsWorkShop 2 жыл бұрын

Awesome! Glad you liked it. Thanks for watching

@frank8534 2 жыл бұрын

Got some good ideas thanks

@PawPawsWorkShop 2 жыл бұрын

My pleasure. Thank you very much

@andrewjohns6823 3 жыл бұрын

excellent ty

@PawPawsWorkShop 3 жыл бұрын

You're welcome!

@joeyleerobbins 3 жыл бұрын

I wish you were close here to Tennessee, I would love to come and spend some time in your shop learning from you sir!

@PawPawsWorkShop 3 жыл бұрын

Every time you visit my channel and see the project that I am doing, you are in my shop with me learning. Thank you very much for visiting

@joeyleerobbins 3 жыл бұрын

@@PawPawsWorkShop true sir thank you for doing them! God bless you and your family.

@lynardburt5992 3 жыл бұрын

Like being his grasshopper... right?

@1988brettc 3 жыл бұрын

Great job, very informative.

@PawPawsWorkShop 3 жыл бұрын

Glad you enjoyed it! Thank you very much.

@elizabethrogers6897 5 ай бұрын

Your videos are great, BUT I would LOVE to see you build this without all of the fancy equipment. I have a regular size table saw, a circular saw...no track, a jig saw and a few other pieces of standard equipment no cnc routers or anything else. Can you do a video for total newbies??😊

@PawPawsWorkShop 5 ай бұрын

With that selection of tools you can build almost anything. I have a beginner series. I’ll also answer any questions that you may help to help you get started

@constructionkings6846 3 жыл бұрын

Mucho Gracias por compartirlo saludos

@PawPawsWorkShop 3 жыл бұрын

Mucho Gracias

@smitty2jones 3 жыл бұрын

Now I'm excited to build a dresser when the price of wood drops! Geesh!

@PawPawsWorkShop 3 жыл бұрын

Build the dresser now, I do not think the wood price is going to drop.

@smitty2jones 3 жыл бұрын

@@PawPawsWorkShop now you're making me sad, paw paw 😂

@PawPawsWorkShop 3 жыл бұрын

Sorry.

@shelby50411 3 жыл бұрын

Great video paw paw...Pretty soon we see paw paw on hgtv he very popular..soon 100k subscribers and youtube multi millionaire :)...its so nice when a hobby can make you millions

@PawPawsWorkShop 3 жыл бұрын

You are very kind, thank you. However, I am so far from that possibility that it is not even a remote consideration.

@pamelagonzales4206 4 ай бұрын

Thank you

@PawPawsWorkShop 4 ай бұрын

You're welcome. I’m glad it helped you

@jongtoehaha 3 жыл бұрын

I subscribed and shared this video as well... Best wishes from Indonesia

@PawPawsWorkShop 3 жыл бұрын

Thank you very much.

@ChildofYHVH 2 жыл бұрын

Good job on the channel. I truly enjoy it. I also see that you are from the boot as well. I’m on the other side around Lake Charles.

@PawPawsWorkShop 2 жыл бұрын

Thank you very much. I hope that you and the area are recovering from all the hurricanes last year

@ChildofYHVH 2 жыл бұрын

@@PawPawsWorkShop Yes sir. Everything is finally getting back to normal. Appreciate it.

@bambiharzott26 3 жыл бұрын

I Love how you show and explain. How can one make a dado cut with no table saw?

@PawPawsWorkShop 3 жыл бұрын

You can use a router. I did a video showing how using two simple boards as a simple jig.

@oskardv12 Жыл бұрын

SUSCRIBED, LIKED AND SHARED

@alexalvarez7884 3 жыл бұрын

Just liked and subscribed paw paw

@PawPawsWorkShop 3 жыл бұрын

Awesome! Thank you very much.

@sylvainhebert5001 3 жыл бұрын

I prefer your projects with cnc

@PawPawsWorkShop 3 жыл бұрын

I have many more CNC projects coming very soon.

@Gettrying101 7 ай бұрын

Game on bud

@PawPawsWorkShop 7 ай бұрын

Ok, thanks. Love to see your finished project.

@ayotaamer 3 жыл бұрын

Awesome 💐🇮🇶

@PawPawsWorkShop 3 жыл бұрын

Thank you very much.

@user-ww2lc1yo9c Жыл бұрын

Is using glue on the end of the plywood a good idea? Using wood on timber end grain is bad idea since the end grain will just absorb the glue.

@PawPawsWorkShop Жыл бұрын

Plywood already is made use with a lot of glue. The end grain will not absorb as much as you think

@jeffgomzalez5597 Жыл бұрын

A New Life

@PawPawsWorkShop Жыл бұрын

Thanks

@dhtango Жыл бұрын

Drawers are big. Hold a lot of clothes. Will the bottoms be strong enough and not sag? I was thinking a bigger dado and use 5/8 plywood for the bottom.

@PawPawsWorkShop Жыл бұрын

These drawers are stuffed with kids clothes and have not failed at all. Thanks for asking

@kuravani1963 3 жыл бұрын

Nice work. what sealer is your favorite. Regards from Maldives

@PawPawsWorkShop 3 жыл бұрын

I use different ones depending on the project. For pen projects I use the Starbond CA glue which produces an excellent sealer and finish. Many of the projects I use schellac. For the cabinets and most of the furniture I use polyurethane.

@ohske 3 жыл бұрын

😯👍👍👍👌♥️

@PawPawsWorkShop 3 жыл бұрын

Thank you

@CVYR490 5 ай бұрын

Hi, i recenlty trying to make a dresser using a non structural 12mm thick plywood... But its a complete failure, because the plywood just warp and warp despite spraying water accrodingly to youtube advise and adding weight. After flattened, the moment you nailed it and glue it, it warp back again and its out of dimension and out of square. I have to scrap the half done project and need to redo it again. Question is does your plywood warp? Are you using a 15mm, 18mm thick plywood?

@PawPawsWorkShop 5 ай бұрын

My plywood is very stable and I have not experienced this problem at all

@mikemalone9896 3 жыл бұрын

Thanks for sharing! I would like to know what plywood you use? I want to paint my cabinets. Thank you

@PawPawsWorkShop 3 жыл бұрын

This is a paint grade and cabinet grade plywood that is sold at The Home Depot. It has the ability to be stained but it will show varying degree of grain.

@mikemalone9896 3 жыл бұрын

Thank you for replying. I have learned so much from your vlogs.

@PawPawsWorkShop 3 жыл бұрын

You're welcome

@paskellsr 3 жыл бұрын

Quick question. How much space did you allow between each drawer? Thank you sir. Jim Paskell

@PawPawsWorkShop 3 жыл бұрын

1/8”

@paskellsr 3 жыл бұрын

@@PawPawsWorkShop Thank you sir.

@javierherrera6179 Жыл бұрын

Hola buenos días, podrían traducir al español, gracias.

@PawPawsWorkShop Жыл бұрын

I look to see how to do that.

@rabakomaba4562 3 жыл бұрын

Great to see it. I did it too. The plans from Woodglut helped me a lot :)

@PawPawsWorkShop 3 жыл бұрын

@rabakomaba4562 3 жыл бұрын

@@PawPawsWorkShop All the best to you and all your family friend 🤙✌️

@garrettpayment998 3 жыл бұрын

what is the material list for one of these dressers?

@TylerSquires-ly4uy Жыл бұрын

I would. Like. It to be longer

@tagwatts2 3 жыл бұрын

Sir: I realize why you do not list your phone number, we would all be calling you day and night as you do such a great job. But I would like to ask you questions about The NewB CNC Kit for the X-Carve 1000. Is there an area I can go to to write to you about this item?

@PawPawsWorkShop 3 жыл бұрын

Use my email address: pawpawsworkshop411@gmail.com.

@Olskeeter 2 жыл бұрын

Yo yo yo

@PawPawsWorkShop 2 жыл бұрын

Thanks

@weirdlilhomie 3 жыл бұрын

Can someone make a supplies list?

@PawPawsWorkShop 3 жыл бұрын

This is not an entry level build. I can give you the basic measurements if that helps

@shaenahale4603 3 жыл бұрын

Is there a materials list?

@PawPawsWorkShop 3 жыл бұрын

Sorry, I do not. It is made from .75" plywood.

@user-ww2lc1yo9c Жыл бұрын

you checked for squarness, what if it is not square?

@PawPawsWorkShop Жыл бұрын

On the long measurement you need to bump the corner toward the center until both measurements are the same

@maxbecker5868 3 жыл бұрын

comment.

@PawPawsWorkShop 3 жыл бұрын

lol, thank for the "comment"

@063317Art 5 ай бұрын

You should have showed how to position the drawer glides.🙁 I have watched numerous videos and have yet seen how to do it

@PawPawsWorkShop 5 ай бұрын

I have shown this numerous times in difficult videos. What is your specific question?

@najibsabor2624 Жыл бұрын

You don't explain about the slide and it's distance

@najibsabor2624 Жыл бұрын

Too much talk