How to build a rear diffuser | Part 1| VW R32 Build

Рет қаралды 9,387

4 жыл бұрын

Today we are going to be doing something new on the R32! We will be making a diffuser from scratch! this build will be a multi part episode and cover all the materials need to complete the job! I have been wanting to updated the rear of the R32 and make it look more modern. The design made for the rear is not to aggressive, but just enough to make the rear look different! let me know what you all think in the comment section below. Building a custom rear diffuser for the R32 will be a fun journey and if you are interested in one let me know. I will be making a mold for the diffuser. The VW R32 did not come with a rear diffuser from the factory and no aftermarket companies make a rear diffuser for the VW R32, so we will have to build one for our car!
Don't Forget to LIKE AND SUBSCRIBE!
** The following links are sponsored by ECSTuning and are linked directly to there website. Any purchase made from the following link will help support the Channel and I would greatly appreciate it**
ECSTuning home Page: Check it out for all your VW, Audi and BMW parts!
click.linksynergy.com/deeplin...
Subscribe Link: kzfaq.info...
Facebook: / thatr32
Instagram: / awenman_32
Facebook Driving Group: / 2819573964742470
Discord Group (Volkswagen Enthusiast Club): / discord
Thank you for watching

Пікірлер: 32

@Banch3z 4 жыл бұрын

Really interesting project! cant wait to see how it comes out in the end! will be a cool idea for the MK4 R32

@ThreePedalGarage 4 жыл бұрын

Thank you! 👍🏻🙌🏻

@weyland1000 4 жыл бұрын

Loving that bumper build . It’s going to look sick on your MK4 . I wouldn’t do anything to the rear of my MK5 R32 as I want to keep it original as possible. They are getting very rare in the UK now . I do have a new set of 18 inch Cruize Blade alloys on it and it looks awesome. Your car is so sweet in the tornado red dude . Looking forward to more content .👍⭐️⭐️⭐️⭐️⭐️

@ThreePedalGarage 4 жыл бұрын

Thank you man! Hoping it’s just a little nice touch people will appreciate

@michaelrohandodds1850 4 жыл бұрын

I've been looking, I like

@ThreePedalGarage 4 жыл бұрын

Thanks man! Hopefully it comes out well!

@fredjones5327 4 жыл бұрын

Great job bro!!!

@ThreePedalGarage 4 жыл бұрын

Fred Jones thanks bro! Hopefully I can get it finished up in a few days

@fredjones5327 4 жыл бұрын

Andrew Wenman no problem brother take your time get it done right!!!

@emmanuelliz7158 4 жыл бұрын

Hmmmm. Why not a quad tip diffuser? The idea is nice, but why the subi light in the middle? I like the whole diffuser idea just not the light. Still look forward to the final producy.

@ThreePedalGarage 4 жыл бұрын

Emmanuel Liz thanks man. I looked for other rear lights and they were really hard to find. This light looked the best out of the options I had

@joshuahawkins2548 4 жыл бұрын

Man, great job so far. All that work to make a mold, you could probably sell that diffuser. I would be interested after the turn out.

@ThreePedalGarage 4 жыл бұрын

I’m going to try and sell it! That’s why I wanted to make a mold. Just need to see how the finish product turns out first.

@tjmone74 3 жыл бұрын

I did this to repair a boat. The real problem with the foam is that it's not high density. I used to make prosthetic sockets and we used a two part high density foam. You won't get the air pockets and it's better for carving.

@ThreePedalGarage 3 жыл бұрын

Where can I buy some? I’m looking into currently redoing the part

@tjmone74 3 жыл бұрын

@@ThreePedalGarage 4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (1 Gallon Kit) www.amazon.com/dp/B08T2195F8/ref=cm_sw_r_sm_apa_glt_fabc_D6JK84XCXZ1KX33ZTDHZ

@ThreePedalGarage 3 жыл бұрын

@@tjmone74 thank you so much! I’ll buy some and use this for my round 2 attempt.

@tjmone74 3 жыл бұрын

@@ThreePedalGarage I just posted an Amazon link. It's been like 13 years since I did prosthetics but I'm pretty sure this is the stuff. Just do some research on the weights. The link I sent is 4lb. I saw they also have 2lb. So 4 would be higher density. I'm not sure how hight they go.

@ThreePedalGarage 3 жыл бұрын

@@tjmone74 ok cool ya I’ll do some research before I purchase anything. Thank you for the help

@piero2611 4 жыл бұрын

It's good that you're not using the original bumper for this upgrade. Nice idea incorporating an F1 style rear light. Personally I would have left off the fins or a least trimmed them down so as not to protrude as much as your initial mock up, but hey its all subjective I guess! ! Hope it goes well 👍

@ThreePedalGarage 4 жыл бұрын

Thanks man! Ya I want to try it with the F1 style light and I am working on the fins now. I’m probably going to cut them back just a little. They were to big before.

@piero2611 4 жыл бұрын

@@ThreePedalGarage yeah the overall look with the F1 style light & accentuated exhaust cutouts is a great idea. If you keep the fins really small it'll give the finished look more of an OEM feel. Just my 2cents ! 🤙