It a gu6 code

U not RUMBLING everything u say is BENEFICIAL to us that want to know more OG!! Definitely appreciate all ur content!

After I get my daily figured out I’m going to dig into my 7.5!!!!! Appreciate the info brother!

Nice Bro, keep the tech tips coming, we need it.

Oof when you said 600hp I was like "Oh hell yeah!" Moser axles, quick performance gears, posi, diff cover, stronger caps. Gonna start saving to upgrade my 7.5

Good informational video bra you're doing something alot of people don't. And that's breaking it down in depth.

Hit that thang boy 💪🏾💪🏾💪🏾. Good info everybody ain’t out to build a race car

I appreciate your videos, I'm on a tight budget and this helps. I have both a 1978 Buick regal Ttype all original and a 1998 z28. 8 have plenty of spare parts for my camaro, I think I will drop in the extra posi unit from my camaro into my Regal.👍

Yeah for my 95 camaro, I swapped the whole rear from a 98-02 camaro. The only problem is I accidentally picked up a traction controlled unit so I had to have a hole drilled into the top of the pumpkin for my ABS sensor along with transferring over the brake lines. Otherwise it was an easy swap. I got a zexel Torsen lsd and upgraded 3.42 gears out of this as mentioned. In addition I rebuilt the rear end with my grandfather with new timken bearings, upgrades TA performance diff cover, Moser axles (cuz one axle was shot from bad wheel bearing), and bearing cap studs. I later bought GM 4.10 gears off eBay, but have yet to install. I agree GM gears are the most quiet, but not as strong.

How in the HELL did I just now find this unicorn channel. Definitely coming back here for the knowledge. Keep it up my G

👍always solid info

I love this video. Very informative.

I'm loving your videos. thanks

I got the Detroit truetrac with the moser 28s. They look identical damn there

Good video. I plan one doin my boxchevy like this. 💪🏾💪🏾

Great video man. Lots of info !!Pinion needs to be just a slight bit deeper just so you know to get it perfect 👌

I just got a '80 Monte Carlo. I'm gonna put an LT1 out of a 96 Roadmaster in it. I'm broke and just lookin for a fun burnout machine/cruiser. Anything I can get from a junkyard is right up my alley. Thanks for the info

Great info been following your build for a while now but would like to know specifics like pinion depth and preload, shimm sizes ,and torque specs .for us that need information spoon feed

thx for the info mr_getinthere💪

I got the 8.5 grand national rear end in my 84 cutlass But I’m gonna build a 7.5 this way for my lil bro thanks mr gitinthere.

Yessir 💪🏾

You the GOAT

All the 5spd f-bods are 3series w/3.42 gears. The auto options 3.23 gears w/3 series. The 2 series are the 3.08 and lower.(weak) Factory grs are 2-cut, Need more back lash. Run pattern is centered. I put in 5-cut 3.55's and set 0.004" Backlash. Just took it out and it's great.

Man bro i love the info you have such a break through, i was currious as to axles because these folks out here selling the axles dont know crap anyway will these work in my 83 camino ive also got a torsen zexel M-GRIP ALLOY AXLE SHAFT KIT 1541H - COMPLETE - 28 SPLINE - 8.2" - 5 X 4.75

Thanks bro

MR_getinthere, now when I do my rear-end like u have here, should I stick with the same 3:42 gear size that would be in there when I pull it from the comaro or should I go with the same 3:73 gear size that came in the stock g-body rear end? I apologize if this sounds stupid but I'm real green when it comes to rear ends other than knowing how to put them in or bolt them back up. Granny taught me that the dumb question is the one u don't ask so I'm asking man.

What would you use from the umi rom the rear housing bushing? The rotor joint or the poly. I already have rotor for the arms. Should I use poly to get a good ride or the roto? It’s not a track car just riding around and burn outs

How many bottles of gear oil do you need to fill it back up have the same setup put a hundred miles on it opened it back up left side axle when I pulled and had no fluid running down the tub right side was good put like two and a half bottles in it I don't think that was enough?

I finally got me one I believe it’s 342 gearing off a 98 z28 has the abs ring on it my thing is how do I know to go with ether thick 373 gearing or thin love your content man 💪💪

Will this also work for the jdm 7.5”? Was used in everything from the Toyota pickups-Isuzu pickups, the biggest difference I’ve noticed from research is the carrier comes out the front instead of the rear. I’m LS swapping a 92 Isuzu pup an everyone tells me they use a 7.5” carrier and locker but trying to confirm before I spend $300-700 on a whole kit

He is correct . A Yukon 7.62 posi 28 spline 377 dollars.. Moser axels for 1987 grand national 319 dollars . Motive bearing kit 115 dollars. (Fits 7.5 , 7 5/8 , 8.5.) 8.5 g body axels fit 7 5/8 as well. About 150 for ring and pinion. Around 1200 hundred bucks in parts. And 150 to 300 to set it up. As of 4 July 2023 you’re looking at 1350-1500 bucks total. And it will definitely hold 500 hp.

What about the Pinion Yoke? Is it the factory GBody Pinion Yoke or the one off the Camaro? Or Does it matter??

What do you order the bearing set for a g body or for the camaro?

💯💯💪🏿👀

How tf do you remove the little keeper bolt mine will not come loose. I’ve gotten impacts and all on it and it will not budge. Never had that much trouble with one.

Is there anything I need to know about series two and three ring and carrier? Thanks for all the help in the work you do.

What up I got torsen the axel too short I can’t put the c clip in might be a inch or two short what you think

Thank you for noticing us brotha we ain’t dogging it all the time but if you catch us at the car wash we might hit it

Hey I’m lookin for 28 spline axles for my 76 Buick they bolt on can you help me out

Are the JEGS BRAND AXELS ANY GOOD ???

What you have too have for that posi unit if you have any

Well you're taking my language

Can you still get the zexel torsen rear for gbody

What gear and pinion is that ?

Hey I found a posi out a 91 typhoon 7.5 28 spline is that ok?

Everyone on here is GM, Chevy, but does this info transfer over to a Ford 7.5 rear end? Because your video caught my eye because I want to beef up my 7.5, it is also 28 spline, so will the Zexel fit a Ford?

Do you have a set ready for a drop in

Yep got mine but you didn't say have to upgrade the axel from 26 to 28 spline.

Sorry for asking on an old video.. could you possibly explain how to reinsert the c clips on the build in this video

You made me laugh about the old man and the cookout comment

What's the best combo for usin all junkyard parts? I'm on a tight almost non-existent budget

Hey when u build that rear end do use a monte carlo pinion or a Camaro pinion ?

I have a problem with mines, too tight and can't adjust backlash. Any solutions?

I have the same rear end, do you have a video of taking the c clips out bc I’m haven a hard time can you send me a video thank you

I have a xbody would that rear end work for my 1978 buick Skylark

Will it not hold slicks at the track with a 475 hp 383?

What'd the name of that set up

U said has to be gbody moser but 8.5 length or 7.5 being its 7.5 rear u confused me

I like how u think...fuck a 9 inch or an 8.8...i dont feel its necessary tbh...i just rebuilt my gm 10 bolt in my 94 firebird formula ..how many miles u think ill get outta the clutches in it? Its a ebay 180 special lol

Does the torsen come with the 3;23 ratio in the 98-02 camaros

Can you do tha same thing with a 10 bolt 8.5 rear-end???

Damn bruh I wish you would answer some questions it would get your subs up too. Jegs sells a rear end with the Moser 28 spline axle for about 1k would this be the same? I live in NJ most mechanics that work on old school cars are white and will over charge and if it's a older mechanic who black and race he does not want your car faster than his.

Will the 28 spline work on a B-body with 7.5 rear end?

901 Checking In

what's up mr getinthere can a 2004 Chevy Blazer backing plate works for box Chevy

Bro do you recommend changing the ring and pinion gears as well? Or will your stock ones work if their still in good shape

Np yeah 3.42 r gu6 3.73 is gt4 codes

Aye bro I'm starting to finally build my SS after stocking up parts for the last 14 years lol. But my question is my housing, axles, and locker have some rust......a littler more than this one, but will it mix with the gear oil and damage anything? I've spend the last two days cleaning it off.

What axles do I need for a Box Chevy?

Big bro I need that I got 83 el co 5.3 cam just getting in the game

What the best way to fit 24 on front of gbody Cutlass, plus wat can I do bout front sway bar

how can I contact so I can have u build me one. 87 elco 350 sbc 700r4 with 22inch rims

I’m doin this To my 85 ss do I get 28 moser 7.5 axel or 8.5 I have the 7.5 rear

How much would you sell one of those units for.... i search through 5 junkyards yesterday no luck

Hey man...is there anyway i can get in touch to get help with my frame-off 85 Monte Carlo ss build...first timer doing frame off and i need some help

Good lord, did u leave any marking compound for anyone else?? Lol.

I know the ring and pinion have to match but is the camaro pinion the right size for monte Carlo rear end because im going to buy 3.73 gears and i dont know i need to buy gears for a 84 monte Carlo or a 2000 Camaro ?

Will this set up work for a stock 5.3 LS in a 1987 MONTE CARLO LUXURY SPORT on 30 inches?

Yo got a video of u redoing a rear end?

305 checking in🔥that whole posi unit come out of a 98-02 camaro right?

I can't find one of these posi units to save my ass. Can you find them & how high are the axels?

Bro were u at I'm in Mississippi

Yo brother How much for a set of 28 spline axles

How much do those axles run?

You got any for sale

Can you email me im trying to get my rear narrowed

V6 cars have the same posi?

Great video I just wish it was in English

"Ill be 1000hp club" lol that aint yo damn car 🤣🤣🤣🤣🤣 i couldn't help myself

Wait u from Nola?

I have a 81 Elco with a 427 small block. Should I keep the same rear end or should I change it