How to carve a wood sign - Start to Finish

Рет қаралды 149,491

Steve's Custom Carving

5 жыл бұрын

This video is an overview of my sign carving process.

Пікірлер: 133

@ins614317 5 ай бұрын

Awesome video and your expertise in explaining details as you work. Thank you.

@PopsCustomSignsLLC 3 жыл бұрын

Steve, this was an excellent video. I'm not sure why I have never seen this before today. Again this was an excellent video!

@ScottishPhotographyCentre 4 жыл бұрын

Excellent. short and sweet! Thank you.

@Forestmcmac 5 жыл бұрын

Awesome job man. I'm so glad I got one of those bases on your recommendation!

@stevescustomcarving1175 3 жыл бұрын

I am so glad you like the base.

@seanj-ski1352 4 жыл бұрын

Great job and video. Thanks.

@Grant_S_M 4 жыл бұрын

Top job, Steve!

@stevescustomcarving1175 4 жыл бұрын

Thanks!!!

@happyhomecrafts 3 жыл бұрын

Very cool, its a beautiful sign.

@leecees.m.u.1802 10 ай бұрын

Super cool love the details ♥️

@hpdiesel 3 жыл бұрын

Great work on the sign and video. I liked how you described what you were doing. size of board used and font size would've been nice as your video made me want to make a sign for a gift. finding the right board/font sign combo was a tough choice haha. appreciate that you did say what type of font you used. thanks to you I made my 1st sign and it turned out great as the family loved it. thanks again for sharing your knowledge.

@danalaniz7314 Жыл бұрын

Excellent video and demonstration. Very easy to understand and the tips you give us make a big difference. Thanks for sharing your expertise and time.

@stevescustomcarving1175 Жыл бұрын

My pleasure!

@daveboisvert5653 4 жыл бұрын

Nice job Steve

@guilhermesampaio5318 Жыл бұрын

This is just amazing, sir! I'm doing kids toys and gonna try your technic to make signs on the shields.

@zitternden 3 жыл бұрын

Excellent. I learned a lot here.

@ptsdbushcraftfaith2300 Жыл бұрын

Awesome video!

@swato59 3 жыл бұрын

Excellent video sir. Thanks for sharing.

@lukeamery6516 8 ай бұрын

Well done mate, I like 👍 your style

@lonesurvivor450 4 жыл бұрын

Great video. It really has stirred up alot of interest. Would you post the equipment (router, bits, etc,) that you used? Thanks & God Bless! Once again, Great work!

@sharontodd6145 3 жыл бұрын

Looks great, cant wait to do one of my own :)

@stevescustomcarving1175 2 жыл бұрын

Thank you!

@Physicsnerd1 Жыл бұрын

Nice job!

@soofihasan 3 жыл бұрын

Beautiful work, you are very steady with the router. Compliments a regards from Palistam

@steveschrecengost6021 3 жыл бұрын

Thank you!

@travisa8176 4 жыл бұрын

Excellent video, thank you very much for sharing

@stevescustomcarving1175 4 жыл бұрын

Thanks Travis. I do what I can. Haha.

@StuffUCanMake 5 жыл бұрын

This is good man! I really like it.

@stevescustomcarving1175 5 жыл бұрын

Thanks Man!

@damrongyutikan8561 2 жыл бұрын

Damrong Yutikan, 8 Pier House, 3 Tide Close, Mitcham, Surrey, London CR4 2GN

@harshabugatti 2 жыл бұрын

Wow! You are super duper awesome at wood carving. You have a very steady hand. CNC router is nothing in front of your palm routing job. I really liked your videos Do you mind posting the router bits used in this video?

@brucepeter3409 4 жыл бұрын

Nice job, good looking sign, Eric & Dave should be proud of your work.

@stevescustomcarving1175 4 жыл бұрын

Thanks Bruce. I definitely owe a lot to those guys.

@yourunclesam6780 3 жыл бұрын

Beatiflul job.Amazing

@stevescustomcarving1175 3 жыл бұрын

Thank you!

@bilalhussain-mg9vq 2 жыл бұрын

Good video, great job

@stevescustomcarving1175 2 жыл бұрын

Thank you!

@mikeseitz2792 2 жыл бұрын

Nice job!!

@stevescustomcarving1175 2 жыл бұрын

Thank you Mike.

@johncoonradtjr.5141 3 жыл бұрын

Excellent job

@stevescustomcarving1175 3 жыл бұрын

Thank you very much!

@philipdavison4066sawdust 5 ай бұрын

Wow I really like that mate. You make it look so easy and I think that I could do it as well 👍👍👏👏👏

@stevescustomcarving1175 4 ай бұрын

Thanks Philip. You can definitely learn to do this. All you need is a small router and a couple of bits. Let me know if you have any questions.

@philipdavison4066sawdust 4 ай бұрын

@@stevescustomcarving1175 thank you that's very good. I do have a small router and a couple of bits so when I get the chance I do want to do something of that nature and If I come across any problems that I think you might be able to help with then If it is ok I'll ask for advice many thanks and I'll share a picture or two

@ahmelmahay 3 жыл бұрын

great job Sir. Im in Ireland and cant seem to find the profile bit you use. would you have a link to where i can get one please?

@sebastianrolandi3893 3 жыл бұрын

Hi, great job. What type of paint do you use? I have tried painting and then varnishing and the black paint went bad. Thanks a lot!!

@zainalabidin6390 2 жыл бұрын

I like this video..👍

@coreymerrill3257 2 жыл бұрын

I'll keep my eyes peeled for the sign if I am ever out that way. I used to go fishing alot out near Standish at the narrows bridge for bullhead and small mouth bass.

@Leafers 3 жыл бұрын

You mentioned using a sanding sanding sealer. Which one do you use, and do you apply it before you start carving out the letters?

@stewandumps 3 жыл бұрын

Man youre good.

@mohdshanimz7180 4 жыл бұрын

Beautiful ❤️.Which wood you are using

@skylane1969 4 жыл бұрын

Really nice! Where do you get your artwork and letter stencil?

@israelwaismel-manor805 2 жыл бұрын

Thanks. Which bits would you recommned to do projects like mashrabiya moroccan screens? They are lovely but do require the removal of all the material and should be able to cut straight angles, not just rounded shapes. I'll appreciate your suggestions.

@mange2 4 жыл бұрын

Just found this. Its like watching a Dave Rhoten video. Identical patterns, Font, procedures and finishes. I had to double check the channel name.

@stevescustomcarving1175 3 жыл бұрын

That is funny. I got started by watching Dave and Eric's videos.

@donm4452 Ай бұрын

@@stevescustomcarving1175 Me too! Eric and Ryan are doing a fine job keeping the tradition of Dave's work!

@brianp1993 5 жыл бұрын

Enjoyed it very much, beautiful sign! Maybe some closer up shots so we can see when your describing how you carve, how its done. Other than that great job

@stevescustomcarving1175 5 жыл бұрын

Thanks Brian! I really appreciate the feedback.

@jasonfitch9341 3 жыл бұрын

Oh ihhhh

@Jaycee37 3 жыл бұрын

Can I use a profile bit on a 1/4 trim router ?

@gcarmichael 3 жыл бұрын

what model router are you using and where do you get the two bits you used?

@davidsandoval2846 Жыл бұрын

Hi I like your video did you freehand the camper and pine tree before you carved it. And are you still making signs today

@keyaanderson7089 4 жыл бұрын

Thank you for the video. What bits do you use? I want to try to make a sign but not sure what bits to get or where to get them. Thank you

@steveschrecengost6021 4 жыл бұрын

Hi Keya, I started with a 60 Deg, 90 Deg V bits. I also started with a 'profile' bit, Whiteside SC55. You can use a round over or 45Deg bit for the edging. I still use these bits for most of my signs. I hope this helps. Let me know if you have any additional questions.

@kennyg9018 Жыл бұрын

Good job Steve. If you get primer on your shirt you can turn it right side out. :)

@steveschrecengost6021 Жыл бұрын

Haha. I didn’t realize it was inside out until I was done filming. Oh well. 😂

@bradcrane8965 3 жыл бұрын

Iv`e been looking for a similar scene for a sign. Where can I find that one?

@davidsandoval2846 3 жыл бұрын

Nice work there can I find the pictures to carve thanks

@friendsofhenllyslnrchrispa3507 3 жыл бұрын

Hi Steve, that is so beautiful and you make it look so easy. What is in the spray can at the very end?

@Serega_Siniy 3 жыл бұрын

What is the name of the drill? Where can one buy? Like from Belarus !!!👍👍👍🎈

@monteashmore3730 3 жыл бұрын

How much would you charge for a paper print of your camper from this sign. Its the nicest one I've seen.

@walterdavis8085 2 жыл бұрын

What route bits did you use.

@abendunduk2176 3 жыл бұрын

hello dude, what name this tools machine driller ?

@GregsTake 2 жыл бұрын

Hi, love the video. I'm looking for a belt sander for the first time. What are you using and what are the specs? My 5" orbital, even with 80 grit to remove black, isn't cutting it. Thanks, Greg in Nashville.

@stevescustomcarving1175 2 жыл бұрын

Thanks Greg. Much appreciated. I use a Skill 3x18" belt sander. Nothing special or expensive. Haha!

@GregsTake 2 жыл бұрын

@@stevescustomcarving1175 Thank you for the feedback. I opted for a Dewalt disk sander. Holy cow. Used it the first time today and it melted that paint right off :)

@usernamemykel Жыл бұрын

SUPERB. Subbed. Question: Could I use my existing 1/8" shank Dremel bits, with a 1/4-1/8" adapter, to use with my DeWalt DWP 611 palm router? Thanks, in advance.

@steveschrecengost6021 Жыл бұрын

I have used 1/8" bits in my DWP611. I do not believe they were made for a Dremel. Be careful. You DO NOT want the bit to come out or break while using. That could be dangerous. Good Luck!

@martinneps9387 3 жыл бұрын

That came out absolutely gorgeous do you make them for other people please let me know thank you very much comment back thank you for this video

@stevescustomcarving1175 3 жыл бұрын

Yes, I do a lot of custom work for others. Thanks for watching!

@martinneps9387 3 жыл бұрын

@@stevescustomcarving1175 What do you charge can you tell me that thank you

@robbietamm7117 2 жыл бұрын

what font did you use on the Standish NY

@woodenporium 3 жыл бұрын

Awesome Steve! Try epoxy next time, it will add more.....

@angelfire0259 2 жыл бұрын

Which tool is that desalt you are carving the letters with ?

@deecee8108 Жыл бұрын

1st, great video. At 10:00... can you tell me what you are using at your nonskid mat under the work while sanding? What did you use for your final spray sealer? Nice video

@stevescustomcarving1175 Жыл бұрын

Thanks Dee Cee. That is just utensil drawer liner. Nothing fancy. I think I got it at Lowes.

@joeweihs2047 8 ай бұрын

Where did you get the motorhome and the trees from to trace?

@jazzguitarstudentufc-fan3908 2 жыл бұрын

what kind of router bit did you use? I also have a DEWALT palm router with a small 4mm diameter router bit. But the result was not as nice. The font was also too difficult.

@mikeolson5986 3 жыл бұрын

how do you print it on the wood ...and space them properly?

@steveschrecengost6021 3 жыл бұрын

I do my design with PowerPoint. Then I print it and use carbon paper to transfer the image. I have begun to play with printing a reversed image on wax paper but it requires a lot more setup to work properly. Much faster though.

@bardmy 3 жыл бұрын

Awesome 👍 Do u have a link to your profile bit? Tq

@stevescustomcarving1175 2 жыл бұрын

Here is the one I use. www.amazon.com/Whiteside-Engraving-CNC-Router-Point/dp/B01LG5XYIW/ref=sr_1_26?dchild=1&keywords=whiteside+router+bits+sign+carving&qid=1629503213&s=hi&sr=1-26

@martinneps9387 3 жыл бұрын

Do you make these for people or are you just showing us how to make them please comment back I would love to have a sign like this really 2 sides so please comment back thank you very much for this video

@lightningfisher8177 4 жыл бұрын

NICE EXPLANATION! PRESS ON.

@sidewayzlaband6523 Жыл бұрын

Amazing how videos you see about sign carving and you see Eric Rhoten's base plate, base plate modification, same equipment used IE Critter sprayer and procedure for making the sign. Tips and tricks. Yet no credit given.

@ronaldesguerra8111 3 жыл бұрын

Hi steve.. what kind of bit did you used? Thanks

@stevescustomcarving1175 2 жыл бұрын

I use 3 different bits on this sign. White side Whiteside Engraving CNC Router Bit, 5/8" Point, 1/4" SH for the artwork and letters Whiteside Router Bits 1500 V-Groove Bit with 90-Degree 1/4-Inch Cutting Diameter and 1/8-Inch Point Length for the cloud around the letters Whiteside Router Bits 1540 V-Groove 60-Degree 1/4-Inch Cutting Diameter and 7/32-Inch Point Length for the inset letters.

@mindyhall4638 4 жыл бұрын

Steve-what is the router base that you are using?

@steveschrecengost6021 3 жыл бұрын

That is the stock base for the 611. I cut a second hole in it to allow me to see with the dust collector mounted.

@Hotled1944 3 жыл бұрын

@@steveschrecengost6021 no it’s not! It’s a custom from Dave Rhoten from Makewoodsign.com

@Hotled1944 3 жыл бұрын

It’s a custom from Dave Rhoten from Makewoodsign.com

@williambowens8291 Жыл бұрын

I'm interested in trying this. Never used a router! What's a profile bit?

@stevescustomcarving1175 Жыл бұрын

This is a detail bit used in sign carving. I use the Whiteside SC50. I would recommend a small router like the Dewalt DP611.

@ptsdbushcraftfaith2300 Жыл бұрын

What size bit did you use in the drill press?

@steveschrecengost6021 Жыл бұрын

Thanks for watching. I use a 2" hole saw for the corners.

@paskellsr 4 жыл бұрын

Did you use a template for the drawings or freehand it?

@stevescustomcarving1175 4 жыл бұрын

I do my layout in PowerPoint. I then reverse everything and print onto freezer paper. This allows me to transfer the design onto the piece. From there, I free hand the carving.

@paskellsr 4 жыл бұрын

@@stevescustomcarving1175 Thank you sir. I appreciate the information.

@reyreyna1068 2 жыл бұрын

Hi what kind of tip did u use for carving

@stevescustomcarving1175 2 жыл бұрын

Hi Rey, I started with a 60 Deg for the location letters, 90 Deg V bit for the cloud and cleanout. I also used a 'profile' bit, Whiteside SC55 for the outset letters. You can use a round over or 45Deg bit for the edging. I still use these bits for most of my signs. I hope this helps. Let me know if you have any additional questions.

@johncoonradtjr.5141 3 жыл бұрын

What do you charge for a sign like that

@stevescustomcarving1175 3 жыл бұрын

This is a 8x24" sign. My costs depend on the size and complexity. For this one the price would be $80 with shipping.

@warakarwarakar7961 3 жыл бұрын

Ehm ... is just me or his green T-shirt is upside down ( label behind his neck)? 👀 . But nevertheless amazing video !! Good job .

@casper1240 2 жыл бұрын

Who needs a CNC well done

@bunnymanalo8549 Жыл бұрын

Shirt is apple green

@buddycromer2142 2 жыл бұрын

what router and plate

@andre1987eph 2 жыл бұрын

The router is a Dewalt DWP611 and the base plate is from makeawoodsign website

@carolgreen5805 5 ай бұрын

Why don’t you show a close up of profile bit?

@stevescustomcarving1175 4 ай бұрын

That is a good suggestion. I will need to start doing that. Here is a link to the profile bit with a picture. makeawoodsign.com/products/profile-router-bit

@davidsandoval2846 Жыл бұрын

Hello are you still sign carving ?

@stevescustomcarving1175 Жыл бұрын

Yes I am.

@davidsandoval2846 Жыл бұрын

@@stevescustomcarving1175 thanks Steve may I ask hiw do you get your images for your signs there great

@steveschrecengost6021 Жыл бұрын

@@davidsandoval2846 I use my cell phone. Pretty low tech.

@RjLevesque 3 жыл бұрын

NOTICE PLEASE: Here is a tip if you are just starting out like I am. All these guys make it look so easy, make it look like it is fingertip touch. Truth is HANG ON TO THAT SUCKER FOR DEAR LIFE!!! Or it will fly out of your hands! They do not look like it, but all these guys have a VERY firm grip on the router TRUST me. =) ALSO: When starting the router on the board, it is important to lay it into the wood at an angle, watch him closely. Nobody seems to tell you this and if you try to punch it straight down on the wood it will fly out of your hand also.