How to Change a Crossbow String | 60X Custom Bowstrings

How to Change a Crossbow String | 60X Custom Bowstrings | Bow Strings

Рет қаралды 191,964

9 жыл бұрын

Learn How to replace your crossbow string by the experts. 60X Custom Strings offers custom bowstrings in a huge selection of made to order color combinations as you will see when you visit our online store www.60xcustomstrings.com
Target archers and bow hunters need reliable equipment in order to be the best at what they do. We know what it takes to be #1! Custom built bow strings that are proven to be the best. We have the World and National Championship titles to prove our point.
60x custom strings need to be in your pack.
Come on Over to Our Facebook Page!
Lot's of Great Posts and Fun Giveaways!
/ 60xcustombowstrings
Give Us a LIKE!
SHARE with Your Friends
Here's what sets 60X apart:
Finding the best archery strings for your exact Bow is never easy. Especially when you hear and read about some of the bad experiences bow hunters run into when buying cheaply made bowstrings.
You don't know who to trust.
But as someone who's been in the industry for a long while, I've got deep knowledge, skill and proven success, so I know how strings should be made!
And, since you’re always looking to find strings that are the best for you - at the Best Price, I want to take this opportunity to introduce you to 60X Custom Strings.
We're here to help you choose from the highest quality custom bowstrings available on the market today.
-Brad Patsy (Owner)
#custom bowstrings
#60xcustomstrings

Пікірлер: 33

@aidand5941 8 ай бұрын

Absolutely agree re-stringing a cam crossbow is really easy.................. That is IF you have a $400-$500 table top bow press.

@averyblanton301 3 жыл бұрын

Well! I got a string from these guys and it broke dead center of the eyelet that slides onto the cam, going on had no issue. Had no issue till about shot 15 in practice when it broke. Stunning!!!! Speechless at this point, never in 20yrs of archery have I seen that.

@yumasobkoviak9580 3 жыл бұрын

Thaanks...good info...I have the right equipment which makes things easier. I have purchased replacement strings from you and always had good service and a good product.

@VV-nn5dy 3 жыл бұрын

Thank you

@williambutler4612 2 жыл бұрын

Replacing cable and string on my TenPoint Turbo XLT it requires 5 twist (4 on bottom, 1 on top) and 15-16 twist on string. Which directions are the twist made?

@kevindonahue7355 Жыл бұрын

Where is the timing marks supposed to be at on centerpoint sniper 370

@1300SL 4 жыл бұрын

Was under the impression it was a good idea to loosen off your limb retaining bolts when pressing a crossbow? Not required with this type of press?

@arturoguerrero4514 3 жыл бұрын

i ordered 1 for my Q 300 but the instruction said i would have to trim off some parts and bass pro shop refused to install it

@gregstabryla9945 3 жыл бұрын

Thanks. Had a string break on me at the end loop. Went to 60 X but none for my particular Xbow. I'm assuming archery shops around me have a press. Not all will work on a Barnett! Any reason?

@60xcustombowstrings84 3 жыл бұрын

What model do you have? We make strings for all barnetts except 1 model. Each model takes a specific string length.

@TheSimba86 Жыл бұрын

all you gotta do is buy a $500 crossbow press

@vybzhabitz5652 3 жыл бұрын

Pro tip use ratchet straps if you don’t have a press

@sonnymichael 3 жыл бұрын

What would i need to do for that to work?

@ryanbrinks8472 2 жыл бұрын

I would not do this... how will you release the strap when your done.. you would have to hope everything falls right in to place with the snap.

@aidand5941 8 ай бұрын

No offence meant, but ratchet straps are just plane ill-suited for this application. They allow the force to be re-applied much to rapidly and with no control.

@Porky186 9 ай бұрын

Did you check the timing???

@johngraves1105 Жыл бұрын

I got a pse xb 275 how would I go about replacing the steel cables

@60xcustombowstrings84 Жыл бұрын

I doubt you will find replacement cables anywhere. Steel cables are obsolete for the most part.

@joshuahammond2321 2 жыл бұрын

After putting new strings on do you have to resight your bow in

@bradpatsy9685 2 жыл бұрын

yes you will need to resight the crossbow

@elchapo-the-great 11 ай бұрын

Do you need to have a press tableto do this

@bradpatsy9685 11 ай бұрын

yes you will need a press

@savannahbanna9086 4 жыл бұрын

I have a bow and sting snapped but I don’t know what size it is

@bradpatsy9685 4 жыл бұрын

what is the make and model of your crossbow?

@tythomps Жыл бұрын

CW to tighten on your strings, correct?

@bradpatsy9685 Жыл бұрын

yes, cw will shorten our strings

@tythomps Жыл бұрын

@@bradpatsy9685 thanks 👊

@noyoudidnt6661 3 жыл бұрын

So how do you workout what strings you need if you get a bow with no strings attached? No numbers on the bow anywhere to even say what brand it is

@bradpatsy9685 3 жыл бұрын

We would either need to know the string and cable lengths or make and model. Without either of those we wouldn't know what to build. If there are still strings on the bow you could take it to a local shop and they may be able to help.

@noyoudidnt6661 3 жыл бұрын

There was no strings at all with it and I can't find any make or model on it. I haven't removed the stock to see if there is any there. Have taken it to a few shops but everyone seems reluctant to help with it for what ever reason 🤷‍♂️