How to Change a Makita Mitre saw blade on the LS1219L 12" Blade Change

  Рет қаралды 12,022

Tom Magic Woodworking

Tom Magic Woodworking

Күн бұрын

This is a quick video on how to change your Makita mitre saw blade with few tricks to make it easier and safer #woodworking #how #video click this link to find a new blade on Amazon amzn.to/3HOVwIy

Пікірлер: 24
@BillMall
@BillMall 4 ай бұрын
Thanks! Couldn't find the blade lock button on the right until I saw this. Exactly the help I needed. And the bungee trick is great!
@TomMagicWoodworking
@TomMagicWoodworking 4 ай бұрын
I'm glad You found the video helpful. Thank you for watching.
@carverparkes2276
@carverparkes2276 4 ай бұрын
Yes.. it has helped. Thanks :)
@TomMagicWoodworking
@TomMagicWoodworking 4 ай бұрын
Thanks for watching
@bmcaboose
@bmcaboose Жыл бұрын
Great straightforward explanation, Thanks!
@quickfirefred34
@quickfirefred34 Жыл бұрын
I'm glad I could help
@TMaierhofer
@TMaierhofer Жыл бұрын
Thank you - just what i needed right now!
@quickfirefred34
@quickfirefred34 Жыл бұрын
Thanks for watching, and I'm glad I could help
@dirkmoras
@dirkmoras 25 күн бұрын
Makita should have made a system thats holdup the safetyguard. I always use a woodclamp
@TomMagicWoodworking
@TomMagicWoodworking 24 күн бұрын
That's true I wish they had
@kayo1019
@kayo1019 9 ай бұрын
Remember that the Bore ring on the new saw is only 24.4mm , most new blades have a 30mm bore hole in the centre, so remember to change the ring to a size that’s suits the blade you are replacing the origonal blade with or your blade won’t run smoothly at all I don’t know why they don’t tell you this in the instruction manual 👍👍
@John-gm8ty
@John-gm8ty 2 жыл бұрын
just got this new. trying to install the blade, they've done the bolts SO insanely tight, the blade guard lock I had to use a hammer to get to tuning, and have yet not managed to get the blade nut to even move, I am quite frustrated, this is ridiculous. quite pissed off right now.
@TomMagicWoodworking
@TomMagicWoodworking 2 жыл бұрын
I feel for you in my latest video I just bought a new 18volt version of that mitre saw and had the same problem I even talk about it in the video. All I can recommend is spray with wd40 leave it a while then try again all the best with it.
@John-gm8ty
@John-gm8ty 2 жыл бұрын
@@TomMagicWoodworking Ended up taking it back to total tools (Australia) had four guys give in a crack and even tried a impact drive, it would not move, so, they DOA'd it and swapped me out another one on the spot and checked it was OK, and off I went all sorted. excellent customer service. so I am all happy again yay! a few test cuts and it's SO MUCH BETTER than my cheap crappy 909 Chinese knock off (yea funny that eh? lol) thanks for replying! and thanks for the video that sold me on this unit.
@TomMagicWoodworking
@TomMagicWoodworking 2 жыл бұрын
@@John-gm8ty I'm glad you got it sorted mate and that you liked the video best of luck and hope you have no more problems 👍
@wontonzilla
@wontonzilla Жыл бұрын
Did they use lock tight because this is not moving
@quickfirefred34
@quickfirefred34 Жыл бұрын
No lock tight I think they have a machine spin the bolt into place so it's over tighten for no reason all I can say is give it alittle Persuasion I thought I was going to break mine too Till it Released
@wontonzilla
@wontonzilla Жыл бұрын
Im going to try making some flat spots and getting a wrench on it. This Allan key system is a massive mistake on a $800 saw,( canadain)
@TomMagicWoodworking
@TomMagicWoodworking Жыл бұрын
The key system works ok providing they have not made it stupid tight,which is what they keep doing. As for the flat spots take it easy but sounds like a good possibility other than that take it back to where you got it.Best of luck
@DWamericanfrets
@DWamericanfrets Жыл бұрын
The inner keeper and washers fell off when I removed the blade. Now I can’t get it back together. I’ve tried every which way but I’m apparently doing something wrong. It would be nice if you could include the entire process. Thank you.
@TomMagicWoodworking
@TomMagicWoodworking Жыл бұрын
hi sorry to hear you have had a problem changing your blade if you go to the link below it shows what order the parts go back onto the saw www.sparepartsworld.co.uk/product/SPARE_LS1018L
@TomMagicWoodworking
@TomMagicWoodworking Жыл бұрын
i hope this helps
@buzicovidiu9229
@buzicovidiu9229 4 ай бұрын
I bought this circular on a 40v battery and when I loosened the screw with the hex to insert the canvas, the shape of the screw was damaged and it is slipping and I don't know how to solve this problem😭
@TomMagicWoodworking
@TomMagicWoodworking 4 ай бұрын
I would contact Mikita customer services and tell them it was damaged when you bought it. They were very good. They will send you a replacement. Thanks for watching
Beginner Woodworker Tips on Buying the Right Saw Blades
9:53
731 Woodworks
Рет қаралды 151 М.
Clown takes blame for missing candy 🍬🤣 #shorts
00:49
Yoeslan
Рет қаралды 40 МЛН
Slow motion boy #shorts by Tsuriki Show
00:14
Tsuriki Show
Рет қаралды 8 МЛН
How to change Drop Saw Blade - Makita
7:36
David Abela
Рет қаралды 23 М.
Makita LS1219L Unbox and set-up
28:22
John Kidd
Рет қаралды 151 М.
cutting planks from small logs
8:23
woodworkinganddiy
Рет қаралды 113 М.
Makita LS 1219L Miter saw - Unpack and set up
5:21
Wood on the road
Рет қаралды 19 М.
Makita Mitersaw 45 Degree Calibration
9:15
Stene Woodwork
Рет қаралды 38 М.
Unboxing, la scie radial Makita LS1019l
24:58
La Charpenterie
Рет қаралды 29 М.
A Makita With a Fricking Laser - LS1219L
6:18
SAW IT
Рет қаралды 6 М.