How To Change And Bleed 🛠🏍 Front KTM Brembo Brakes

How To Change And Bleed 🛠🏍 Front KTM Brembo Brakes | Replace Brake Pads and Brake Fluid

Рет қаралды 46,382

4 жыл бұрын

Check out our line of Enduro Helmet chin mounts for action cameras - shop.wannabes.life
In this video we are going to be changing the front Brembo brake pads on a 2010 KTM 300 xcw. This process is the same across the board for most KTM and Husqvarna years and models. We will also go over how to bleed the brake fluid through the brake system to flush out the old brake fluid and any bubbles that might have got into the brake line. This is a relatively simple process that is easy to do with some basic hand tools. There are a few tricks that will make your life easier and we will go over those in the video. It is very important when you are bleeding the brakes that you make sure to not get any air in the brake system, by keeping the reservoir full of brake fluid, otherwise you will have a bigger project on you hands than you had bargained for.

Пікірлер: 47

@NAME-ff4mh

wear gloves DOT is not healthy to humans

@JeffMerrill-gn2lr Жыл бұрын

My brakes won't work. They keep locking up. You can bleed them but the pressure remains and only builds the more you squeeze the brake. Over these brakes

@jonthepiano 3 жыл бұрын

you put the lid on backwards !

@dylanjames4537 Күн бұрын

Good video, i will add that the anti rattle plates and clips inside the caliper need attention paid to them tou didn't explain what they do or where they are located in the caliper and what thier function is, if the clips and anti rattle plates are too loose the pads knock around in service

@delinquense 3 жыл бұрын

I've watched a ton of these vids for ... I think yours was the best. You paid a lot of attention to detail, especially on the brake lever compression / release instructions.

@ralphreynolds4803

I use a (reusable) cable tie to temporarily/repeatedly hold the lever in. Time consuming, true, but if you have no help, it works.

@patl4747

When change fluid you can always empty the the reservoir first with a syringe

@JoshStreetDesign Жыл бұрын

You left too much fluid in that reservoir. I did the same thing once an the fluid boiled, expanded too much and blew out the caliper seals, locked the brakes up, pretty much ruined everything.

@techsmart9475 2 жыл бұрын

Please help me I have a 2017 ktm sxf 450 and I was taking apart the front brake and unscrewed just the brake cable attached to the master brake cylinder and now I can’t get it to go stiff it’s got fluid but I just cant get it to go stiff and work

@punyetangpantra Жыл бұрын

I almost empty my fluid still not functioning well its still soft when i hit the brakes😞

@ShiftGearsMoto 3 жыл бұрын

Just randomly stumbled across this. Really nice video!

@xrv_world_explorer2k207 2 жыл бұрын

Hello i have two question , which diametre disc have??? And i want a link for the disc protector

@roccit 3 жыл бұрын

Thanks man, just what I needed!!

@mixtips637 Жыл бұрын

Very help full

@delinquense 3 жыл бұрын

Can you put a link in the description for the extra set of hands? They were really cute.

@raynunez9031 2 жыл бұрын

hello I have a Ktm 690 love 2020. and I would like you to help me I have to change the front and rear fronts I have never done it I have searched for tutorials on KZfaq I cannot find for this motorcycle in specific it is simple I changed the pins oh you have to bleed the liquid from brakes ?

@Rumpl4Skyn 2 жыл бұрын

How do you know when you're done bleeding it?

@hrsey71 2 жыл бұрын

with my brakes, i have tried to bleed them several times now and no matter what i do, the lever pumps and pumps and never gets firm. the caliper doesnt even move. did i suck air into the line? and if so how do i fix it?