Setting up the 79 to fit the 35 12.5 16 Maxxis trepadors
Пікірлер: 32
@rollyb50613 жыл бұрын
that looked easy to change the springs , at least you made it look easy
@TeamBulletOffroad3 жыл бұрын
Hehe, when you muck around with stuff enough, you manage to "get by"
@SwingingVoter2 жыл бұрын
No safety stands or wheel chocks.....Mate, your family loves you for sure!!, this is how an amateur does it.
@TeamBulletOffroad2 жыл бұрын
Thanks for commenting Tom.. Points noted.....
@dustyfarmer3 жыл бұрын
Try some of that Liquimoly injector & fuel treatment every couple of tanks, it quietens down the injectors in my VDJ79R. I ran it mainly to clean the fuel system & injectors, it's safe to use at the recommended rates.
@dustyfarmer3 жыл бұрын
P.S I think Penrite make a similar product but I went with Liquimoly as Nathan over at exploreOZ did some tests on His KZfaq vid. and I was impressed with His results.
@TeamBulletOffroad3 жыл бұрын
@@dustyfarmer Cheers Dusty, i will definitely look into that..
@chrisjermyn74422 жыл бұрын
Thanks mate, was wondering how those springs were removed. Bloke at work reckons you need spring compressors, ours is a 100 series but similar set up and springs look the same as yours. Cheers again. Keep trucking mate
@TeamBulletOffroad2 жыл бұрын
mate, with the sway bar off, you shouldn't need compressor, just watch brake lines...
@leightonc97233 жыл бұрын
i run 35 inch treps on 2inches and they do scrub the back of the front guard
@TeamBulletOffroad3 жыл бұрын
Thanks heaps for that info, makes me feel better about changing mine..
@moparman15063 жыл бұрын
I always run BP ultimate diesel in my 79 and never fill when the fuel trucks there ( my golden rules)
@TeamBulletOffroad3 жыл бұрын
Excellent advice, cheers
@Ewans79 Жыл бұрын
Hey mate I’m about to Chuck a 3inch lift in my 79 rear I’m okay with But front It’s a full superior kit with hyper flex radius panhard drag link etc What’s the best order to do this in remove and install Cheers mate! Love the videos btw!!!
@TeamBulletOffroad Жыл бұрын
You talking rears being changed?
@florintudic50938 ай бұрын
7979
@florintudic50938 ай бұрын
3
@andrewdurbidge12833 жыл бұрын
Did you do any height changes at the rear? aren't the TT parabolic only a 2" lift and you increased the front to a 3' lift?
@TeamBulletOffroad3 жыл бұрын
Yes correct, I only had those 3 inch fronts in while I was testing the treps, im back on 2s now with the 315s, I just ran 20psi in my bags to level it out whilst I was driving it On-road.... Drives much nicer with 2s front and rear....
@andrewdurbidge12833 жыл бұрын
@@TeamBulletOffroad I have 35's on -25 offset from Patriot Campers but they do scrub out the guard so was looking at the extra 1" lift to help clear. Not sure what i am going to do yet....i like to try and keep everything as legal as possible. Thanks for the reply and am enjoying your content... Cheers from another Chippy up in Cairns.
@TeamBulletOffroad3 жыл бұрын
@@andrewdurbidge1283 The 3s up front were perfect for the 35s mate.....Cheers buddy
@bretthogno2 жыл бұрын
Those aftermarket radius arms bring the whole diff forwards abit too don't they? Help with clearance bigger tyres and 2" lift? Cheers
@monkeyd.94672 жыл бұрын
mine usually fall out when on a hoist
@TeamBulletOffroad2 жыл бұрын
Hehehe
@florintudic50938 ай бұрын
2
@tonymoore43133 жыл бұрын
How big is the bump stop
@TeamBulletOffroad3 жыл бұрын
Around 60mm from memory..
@James-lc2ow Жыл бұрын
Bro made me nervous asf watching you put your head under that guard when you were changing them 😅 ... always best to put a couple tires or something under the rig incase your jack fails mate don't want to lose your life over a simple coil change...
@TeamBulletOffroad Жыл бұрын
Thanks for your concern...
@NiTr0913 жыл бұрын
What’s your day job?
@TeamBulletOffroad3 жыл бұрын
Chippy mate.....
@petewelsh11232 жыл бұрын
Sharp bloke 😂😂 measure off the ground .. thats fairly smart.. ffs