1st step is to always make sure to remove your fill plug first. If for some reason it’s stripped or broken and you didn’t notice you’re going to be what’s called “FUCKED”! At least until you figure it out or fix it. When making a how to video you should tell the viewer the size of the fasteners which on this vehicle is a 13mm for the cover bolts and can use a 3/8 extension or 3/8 square pipe socket for the fill plug… just clean it will before inserting it to make sure you do not strip or damage it.
@jss-xe5li3 жыл бұрын
Great video, im about to do my f150 this weekend.
@jss-xe5li3 жыл бұрын
I was wondering if you do side work on trucks??
@BootLegGarage7753 жыл бұрын
Hi yes we do we are located in NV.
@jss-xe5li3 жыл бұрын
@@BootLegGarage775 can you email your number please? My email is sanchez1911@yahoo.com. looks like we live in the same town p-town
@BootLegGarage7753 жыл бұрын
@@jss-xe5li ok sent
@SuperAxeman74 жыл бұрын
Very nicely done.
@BootLegGarage7754 жыл бұрын
Thank you very much
@darrylclausen6294 Жыл бұрын
02 f150 Fx4 differential cover bolts are 5/16 x 18 x 3/4" long with a 1/2" flange head on them. I stripped a few taking them off. Also I forgot the tag after I threw it aside. But the great video reminded me to go find it. thanks
@BootLegGarage775 Жыл бұрын
Glad you enjoyed the video
@bryankowch4545 Жыл бұрын
Thank you so much I went threw 2 differential s and I was on the brink for a 3rd cause I didn't know where the plug was I overloaded the first one with Asian carp and the whole rear end fell out 😂 fish everywhere on the dirt road 2 nd one was ignorance now I m gonna save this one 😂😊
@PauliesGotIt11 ай бұрын
Good vid thanks for sharing
@jockarlscarmona33282 жыл бұрын
Como cambiar el sello del diferencial del lado dela rueda derecha
@StoicJason2 ай бұрын
Great video. Thanks!
@Me_nicky2 жыл бұрын
Love this guy, so funny😄
@BootLegGarage7752 жыл бұрын
Thank You
@tylernagle-perkins46683 жыл бұрын
Don't get your goddamn fingers in there! Haha love the video, well done guys
@BootLegGarage7753 жыл бұрын
Thanks for subbing. ya we do a lot of funny things like this,
@emmanuelgarcia30213 жыл бұрын
@@BootLegGarage775 will this apply to the harleys and ligthtings ?
@BootLegGarage7753 жыл бұрын
@@emmanuelgarcia3021 Hi yes it does apply.
@emmanuelgarcia30213 жыл бұрын
@@BootLegGarage775 thank you for the content.
@BootLegGarage7753 жыл бұрын
@@emmanuelgarcia3021 Your Welcome
@suzmaca650 Жыл бұрын
Omg you said chingaderis…love it 🇲🇽
@davidraborn36543 ай бұрын
I'm old school. I like Your Style.
@BootLegGarage7752 ай бұрын
Glad you enjoyed the video
@geraibarra1391 Жыл бұрын
Divertida forma de trabajar 👍
@jansantiago3913 Жыл бұрын
How long should I let the gasket maker sit before adding fluid/driving? Great video btw!
@BootLegGarage775 Жыл бұрын
Hi i let it set for about 5 to 10 minutes then you can add fluid.
@randybeard6040 Жыл бұрын
Best to let set overnight...
@DistantDemon3 жыл бұрын
Love it and the mechanic is amazing
@Johar_Baffa Жыл бұрын
good job
@nelvoruiz2908 Жыл бұрын
Thanks for sharing
@BootLegGarage775 Жыл бұрын
Your Welcome
@jockarlscarmona33282 жыл бұрын
Estoy atorado no puedo quitar el disco una solución
@Nice_Vip2 жыл бұрын
Good job
@BootLegGarage7752 жыл бұрын
Thank You
@sam33more94 Жыл бұрын
Steve, thank you for sharing. Just one question....what was the extra fluid that you placed in that differential???? I'll wait for the answer. Greetings from Texas
@BootLegGarage775 Жыл бұрын
Hi ya its called Lubegard Mixture Limited Slip Supplement 4 Ounce you can get it at Oreilly's or any auto parts store. Hope this helps you
@sam33more94 Жыл бұрын
😮😢😢@@BootLegGarage775😊😢14 dB bub by ppl l0 😊 Hello GG very voy 3s se😢pr0ds t c😊did voy ds Ubuntu
@santiagodavila1426 Жыл бұрын
Can you use break cleaner instead to clean all the differential better..??
@BootLegGarage775 Жыл бұрын
Hi yes you can use break cleaner
@Poohdaddymagic Жыл бұрын
What size are the bolts holding cover on
@BootLegGarage775 Жыл бұрын
They are 5/16" x 18, Thread length is about 3/4
@user-bw6ys3hz6k Жыл бұрын
I clean the gears with brake cleaner and wip the excess out with Scott's blue paper Towels
@scavenger_killar3678 Жыл бұрын
Mine come with gasket do I put on the gasket sealer and then the gasket
@BootLegGarage775 Жыл бұрын
Hi we didn't use a gasket just used the sealer on it
@paulytillman46778 ай бұрын
What was used to take the plug out?he never mentioned
@BootLegGarage7758 ай бұрын
Hi ya its just a socket wrench that was used to take it off.
@dallasmurphy21323 жыл бұрын
No gasket ,. Just grey gasket sealer ?
@BootLegGarage7753 жыл бұрын
Hi yes just gasket sealer.
@FloydFreed3 жыл бұрын
He kind of reminds me of Red Green.
@sergiorosas1311 Жыл бұрын
Why you don’t use the gasket instead glue??
@BootLegGarage775 Жыл бұрын
Hi ya its a sealer not glue.
@scavenger_killar3678 Жыл бұрын
???
@eriknielsen1382 жыл бұрын
How often should you change the diff fluid
@BootLegGarage7752 жыл бұрын
Hi ya i change mine every 50000 miles cause i go off road a lot.
@ernievilla6840 Жыл бұрын
@@BootLegGarage775 I have a 03 Ford f150 and I don't drive that much or go off road , regular rear drive, never had changed the fluid, is that wrong?
@BootLegGarage775 Жыл бұрын
@@ernievilla6840 Hi ya i would change it if you have never done it before. It's good maintanance
@GrimaDSC Жыл бұрын
Love the sense of humor. I’m a mechanics daughter and it made it much easier to learn.
@BootLegGarage775 Жыл бұрын
Hi glad you enjoyed the video
@jamesmahle1259 Жыл бұрын
@timothymcveigh8194 It's spelled torque and he said 15-20 ft lbs
@matt75hooper9 ай бұрын
You need to get out more.
@leonorgodinez169 Жыл бұрын
Funny guy! What kind of sealant? And fluid?
@BootLegGarage775 Жыл бұрын
Hi yes the fluid is 75 140 royal purple and grey rtv sealent for diff cover
@unclematt3 Жыл бұрын
@@BootLegGarage775 You can do the sealant and put it back on and add the oil right away? The back of the sealant tube says wait 24 hours. Is it OK to add the oil before that?
@BootLegGarage775 Жыл бұрын
@@unclematt3 Hi just wait like 5 or 10 minutes and it is good.
@lomorton11192 жыл бұрын
Guy is hilarious 😂
@BootLegGarage7752 жыл бұрын
Thank you
@jimstaszko16752 жыл бұрын
So about 1.5 ugga duggas?
@BootLegGarage7752 жыл бұрын
lol Yep
@leonorgodinez169 Жыл бұрын
Ok so 2 bottles? Ford F-150 1998-and 1 small?
@BootLegGarage775 Жыл бұрын
yes
@8788bb2 жыл бұрын
Ain't it funny how those fords have dirt underneath and fall on you while working on them. A/C compressor. Starter, fuel filter, and what not.
@BootLegGarage7752 жыл бұрын
Hi ya we go off roading a lot where we are at.
@leonorgodinez169 Жыл бұрын
What’s the name of the white bottle u put in with the purple one? Are Farts included? LMAO!
@BootLegGarage775 Жыл бұрын
it's an additive for the diff fluid. can't remember the name sorry
@masonmedina753911 ай бұрын
I put lock tight on plugs.
@kellismith43292 ай бұрын
So you’re the one
@Joe_Brown99 Жыл бұрын
😂👍
@josh_kibishima2 жыл бұрын
LOL oh man i got so many handy dandy chingaderas XD hahaha. do you guys have any handy dandy chh-chh's too? haha
@BootLegGarage7752 жыл бұрын
no but we got some gigabobs lol
@josh_kibishima2 жыл бұрын
@@BootLegGarage775 lol now that's a well stocked mechanic
@stoker2612 жыл бұрын
if you dont wear gloves you’ll need a doctor. thanks for this👍
@craphittingthefan2360 Жыл бұрын
This mechanic is the perfect reason you do this job your self, he did not use a gasket and I never saw a torque wrench set for 33ft lbs he just wants to send it and get onto the next job.
@BootLegGarage775 Жыл бұрын
Hi glad you enjoyed the video. He has 40yrs experience and he did torque them down off camera.
@jamesmahle1259 Жыл бұрын
@@BootLegGarage775 don't need a gasket with the rtv he's using and 33ft lbs would be too much...go into your bathroom, stare at the mirror, and see the moron staring back at you.
@FordsRule3518 ай бұрын
Not very bright are you. Gaskets are not required and busting out a torque wrench on differential cover bolts is a waste of time. It's not a fucking head bolt or a wheel stud.
@ME-xd4he4 ай бұрын
Bullshit. You should stay on the couch and stay away from vehicles.
@danielpadgett28313 ай бұрын
Why didny he use a gasket and torque them down on camera 🤦@@BootLegGarage775
@mikeolsen11722 жыл бұрын
Bro that was the most dragged out exhausting video on the simplest thing I’ve ever seen
@jamesmahle1259 Жыл бұрын
I was just fine until I read this and now I feel tired.
@stephenfarmer22162 жыл бұрын
I saved a $146 Do-it-yourself
@BootLegGarage7752 жыл бұрын
Hi ya i save a lot of money have a mechanic in the house
@NuclearEngineerDOE2 жыл бұрын
@@BootLegGarage775 And access to a lift is key
@BootLegGarage7752 жыл бұрын
@@NuclearEngineerDOE ya it is key and we have a friend with a lift also
@miguelvilleda43412 жыл бұрын
ive alwayslike me a little mess especially the shit talking of some poeple why dont u loud mouth s see if u can fight as well as u twist wrenches. good video.guys
@BootLegGarage7752 жыл бұрын
Thanks
@luisponce1472 Жыл бұрын
If you were Smart you'll use a hose that Fits The Tip of the bottle of Oil
@ME-xd4he4 ай бұрын
The quarts come in squeeze pouches. Now that’s smart.
@omarmorales64379 ай бұрын
lmao 8:50
@adolfoa.5183 Жыл бұрын
🤣🤣🤣🤣 chingadeeerrraaa
@fredcloud96683 жыл бұрын
Goofy
@gonzalezprestige149820 күн бұрын
I like the content by your sense of humor is sickening.. maybe stop talking too much and concentrate on the project.