How to change front shock absorber on FORD FOCUS 2 (DA) [TUTORIAL AUTODOC]

Рет қаралды 37,250

autodoc.co.uk

Күн бұрын

How to change front shock absorber on FORD FOCUS 2 (DA) 1.4 Saloon 04.2005-present [TUTORIAL AUTODOC]
Shock absorber on FORD Focus C-Max (10.2003-03.2007) / VOLVO C30 (10.2006-12.2012) / VOLVO S40 II (MS) (04.2004-12.2012) / VOLVO V50 (MW) (04.2004-12.2012) / FORD Focus Mk2 Cabrio (DB3) (10.2006-09.2010) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
🔝 Top brands that produce shock absorber: BILSTEIN; MONROE; MAPCO; SACHS; JP GROUP.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co.uk/?...
Shock absorber: www.autodoc.co.uk/car-parts/s...
Shock absorber for FORD FOCUS 2: www.autodoc.co.uk/car-parts/s...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ kzfaq.info?s...
🛠️ The tools you need to replace front shock absorber:
- wire brush
- WD-40 spray
- copper grease
- drive socket No. 13
- drive socket No. 15
- drive socket No. 18
- Torx # T30
- Torx # T40
- HEX bit No.H6
- shock absorber socket
- wheel impact socket No.19
- combination spanner No. 19
- ratchet wrench
- torque wrench
- tap wrench
- hammer
- flat chisel
- crow bar
- hydraulic transmission jack
- hydraulic strut spring compressor
- fender cover
- wheel chock
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► FORD car repair tutorial - • FORD car repair tutori...
► FORD FOCUS 2 car repair tutorial - • FORD FOCUS MK2 car rep...
► How to replace front suspension arm on FORD FOCUS 2 TUTORIAL - • How to change front su...
► How to replace front brake discs and front brake pads on FORD FOCUS 2 - • How to change front br...
Mobile Shop: m.autodoc.co.uk
📢 AutoDoc in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
KZfaq: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...

Пікірлер: 39

@autodocuk Жыл бұрын

Attention! This video contains mistakes: 5:42 - the tightening torque is 50 Nm, not 55 Nm. 6:49 - the tightening torque is 90 Nm, not 110 Nm. 7:21 - the tightening torque is 48 Nm, not 65 Nm. 8:09 - the tightening torque is 32 Nm, not 30 Nm. We're sorry for the inconvenience 🙇‍♂

@ICEW0LF137 5 ай бұрын

Forgot to put the bumpstops in as well

@bernhauser323 6 ай бұрын

Yours videos is PERFECT

@lisabeach2371 3 жыл бұрын

Fantastic video. Easy to follow thank you!

@autodocuk 3 жыл бұрын

Thank you for your feedback! We are glad to know this tutorial was useful to you. Stay tuned for more! Best regards, Autodoc team!

@randytoerien9500 4 жыл бұрын

Great video guys. Easy, simple and very informative. Cheers. R

@autodocuk 4 жыл бұрын

Thank you for your feedback! It is our top priority to receive comments as positive as yours. Be sure to subscribe to our channel if you don`t want to miss out on more useful videos in the nearest future. Best regards, Autodoc team!

@autodocuk 5 жыл бұрын

Don't miss our new interesting videos! Remember to click the 'Subscribe' button and the bell icon. We are going to post new videos every week!

@johnwayneisthisme3475 5 жыл бұрын

Awesome job... Thanks...

@autodocuk 5 жыл бұрын

Thank you for the feedback! Stay tuned for more interesting content! Best regards, Autodoc.

@herrtomov3480 2 жыл бұрын

Super. Viele dank.

@dave22240 5 ай бұрын

Very useful thanks

@alexandruionita9796 2 жыл бұрын

Thanks

@llywelyn-qz4ch 3 жыл бұрын

Floor full of ball bearings!

@TheMcooper17 5 жыл бұрын

cant tell if you are british from the website or german from pronciation of auto but your videos are great,

@autodocuk 5 жыл бұрын

Thank you for your feedback! We are happy that you like our overview video. Best regards, Autodoc.

@RolloTomasi-cl2nk 4 ай бұрын

6:46 in different videos the value is in the range 80 - 150 Nm

@autodocuk 4 ай бұрын

Yes, you are right, in this case the correct torque is 90 Nm, this will be useful for us. Thank you for your attentiveness.

@davyboy888 Жыл бұрын

@5:34 where exactly did you position the top of the spring end in relation to that lob on the plastic bearing carrier ? This needs to be in a certain position I believe, no ?

@autodocuk Жыл бұрын

Yes it must be in a certain position of the lug on the plastic bearing holder. more specific information can be found in the vehicle maintenance log book

@markimaysay2510 3 жыл бұрын

What does the copper grease do?

@autodocuk 3 жыл бұрын

Thank you for your comment. Copper grease perfectly protects against corrosion and sticking of parts, thereby preventing the thread from souring and facilitating dismantling during further replacement. Best Regards, Autodoc team

@abdelmoneim3796 Жыл бұрын

The original suspension is harsh on bumpy roads. Can you please suggest a softer suspension than motorcraft ??

@autodocuk Жыл бұрын

We do not have such information, we recommend that you consult your mechanic.

@neiliano12 Жыл бұрын

What are the dimensions/measurements of the pinch bolt from strut to steering knuckle? Need a new one.

@louisronan4600 Жыл бұрын

That’s why I came here as well. I by is it so hard to find out what size it is? I’ve looked everywhere. I think it’s between 15mm and 18mm

@seragali1353 Жыл бұрын

Is it necessary to replace the two shock absorbers together, even if the other is in good condition? Knowing that the car has traveled 100,000 miles

@autodocuk Жыл бұрын

It is recommended to change shock absorbers in pairs and not individually.

@YangaXego 2 ай бұрын

Where can I buy the shock obsorber plz urgent

@autodocuk 2 ай бұрын

Our Customer Support team is always ready to help you to find compatible car parts fot your car and you can get in touch with us via email - info@autodoc.co.uk or form here: www.autodoc.co.uk/services/contact AUTODOC

@GREEVES246 3 жыл бұрын

STEERING SEEMS STIFF ALL NEW PARTS AND TOP MOUNTS AND SHOCKS AND SPRINGS ?

@autodocuk 3 жыл бұрын

Unfortunately, we can't specify exactly the issues with your car. We highly recommend you use a professional car workshop to have a close look into the issue with your car and locate the faulty parts.

@DanielDK909 5 жыл бұрын

Is it the same on a Ford Focus 3 ?

@autodocuk 5 жыл бұрын

Thank you for your feedback! The order in which this procedure should be carried out may vary depending on the vehicle design. Best regards, Autodoc!

@wotviewer 3 жыл бұрын

ok, now please show job done without the tools not mentioned in the list: 4 point car lift, transmission support stand, and mega spring compressor !

@autodocuk 3 жыл бұрын

Thank you for your comment. Stay tuned for updates on our channel, the video you are interested in will definitely appear on our channel. AUTODOC

@tromzinck 2 жыл бұрын

The clips are way too short. Remember we're many amateurs watching. We need to REALLY see what is going on. Slow down. Also I would like to see how itis done if you don't have professional equipment. I need to do it in the driveway with a simple garage jack and no professional equipment at all.

@autodocuk 2 жыл бұрын

Our videos are for guidance only. Unfortunately, we cannot show all the nuances and problems when replacing, this is all individually and it is not always possible to solve them within the framework of safety precautions at home. To avoid this, we always recommend that replacements be made at specialized services. AUTODOC