Wow, you're awesome, I've been switching it in my 460 and didn't know there was one in the 261! I've been learning so much from you, thanks so much for your kindness...

I switch mine around also. Enjoy the bloopers take care of your camera. Hope you're having a blessed week and can't wait for your next video.

Always enjoy your videos. Cold here in Thunder Bay -35C so no sawing until spring. Your personality is a breath of fresh air. (smile!)

Great info! I personally don't use a winter setting only because there is 7+ feet of snow where we log. Usually can't get into the mountains until June.

Bought a Stihl MS 362C in late fall. I haven't had much of a chance to use it but what little I have it seems to cut like a larger saw. Way more than I expected out a 60cc. Thanks for the tip. Learn something new everyday.

*Chuckle* I like the outtakes. Definite thumbs up. I've wondered what the snowflake is for on my 661cm .. but living in Australia, I thought leave it on summer as it's rarely below 15C even in winter. Didn't realise it was there to heat the air over the motor but this makes sense. Thanks.

Great video Felixia! It was -14 fahrenheit here in Oklahoma the other day. That is way below normal for this part of the country.

I was using my 261c on the weekend, the temperature was -34 C and the saw run like a charm. A little harder to start when cold, but once running it had no issues with the shutter open to preheat the air. Good video, some people don't know about the shutter.

I thinking of lighting my truck on fire to melt the ice. Sprayed deicer on it did nothing. Smart guy would have parked backhoe outside. Put truck in garage. Thank you for the cold weather tip on chainsaw. I had no idea had winter settings. Outstanding

I really enjoy your presentations on the little things that are in reality big things that often are over looked like this one regarding the winter/summer operation. I would really like to see you give a lesson on chain tension and how to properly adjust it, too much wears out bearings, too little allows the teeth to rock back reducing efficiency.

Great info! Very important to don't forget to change it to warm weather 🌡️ again when it's time, it can blow your engine! Luckely in Portugal we don't need to change that! Greats!

👍Nice description! I always forget to tell my buddies this little gimmic (until its too late and they ask me, why their saw's stuck in cold condition after some cuts.) Shame on me! I'm thinking about telling them to follow you on your channel instead of asking me...😇 As always: very cool video - in this special case literally...

Wow iam always learning . And if its from a beautiful tree goddess that’s even better . Hi timber

Thats a simple, interesting feature. We run both Stihl 661, and Husky 372 and 385, but they dont have this vent. When its colder, like 10 F or colder we usually set the saws up on top of the log skidder exhaust and warm them up a bit before crank up.

Thanks for another great video the 261 our favourite saw to 👍

I have enjoyed every one of your videos since I subscribed last year. I'm now going back and watching old ones! You do a wonderful job of explaining things. Have you ever done any discussion on the different bar oils depending on cold temperature? Seems to be some divergent opinions! Thanks so much for your great work! 👏

The winter chainsaw adjustment. Outstanding you are the bestest. Why don’t the dealers fill people in. On this Thank you

Hello from Canada , It's been cold here too and lots of snow. I have to do this to my 261 too, believe it or not I had to show my dealer this , because he didn't know. I have a pretty crappy Stihl dealer . Thanks for sharing and keep warm

I’ve just got myself a MS-231c and couldn’t make out what I was looking for to switch modes (by looking in the manual). Watching this made it jump out at me and now I know…. Thank you so much, I love your videos. PS: Do you do all of your own maintenance or do you get it serviced at a dealer for things like clutches / springs / setting the carb?

She makes good videos and has a great voice ~

Thank you so much....I was all way's wondering how to do that

Nice Video That's different to the older saws like the my 021 Thanks

Another great video, I am sure not a lot of people knew that was there. We all know most people do not read the manual.

Your video is useful. In addition you could show how attach (optional) plastic cover or just duct tape to incoming air holes (1/2 from bottom).

Thanks for that tip I have a ms271.

Great explanation.MS261👍

Another great video

great information I did not know this , thanks !

The end of video is the best :))

Hi Female lumber jack! Fantastic video, do you also have the artic cover for the starter side in your country? Love your videos keep up the awesome work 👍👍💪💪😁😎❤️!

Very good info

Echo has same thing. It actually helps when it’s cold 50degrees is not cold tho I don’t change my echos over until it gets below 30degree But I mean there’s tons of other saws that don’t even have this option (I have a echo cs500p and a cs400 and a cs800p). And many others

Thank you lass, I didn't know this

My 261c-m arrived yesterday at last. Only been waiting 2 months 👍🪵🔥🪓

Is it the same procedure to switch modes for the 400 and 362, both of them have been a little bit boggy in the cold and now I'm guessing this is probably why.

elsker at du lader dine bloopers spille til sidst

Never knew ny saw even did this..thank you

Timber, what an awesome name 4 your pet!

When the dog is named Timber, you know the owner loves felling trees :)

I just got a STIHL ms 194 t. I can't seem to find that tab anywhere underneath the carb cover, and there's no mention of it in the manual, just different kinds of filter you can use in the summer and winter (fleece or fabric). Do smaller saws just not have this feature?

Hey Flex, Can you do a unedited normal speed cold start video outside on all your chainsaws to show how many pulls it takes you to get each of them started and running when they have been sitting outside for awhile in your next video?

Great video good info. 👍

im glad the 500i in fuel injected dont need tuning but my others do;)

..I bought a new 261 C-M M-Tronic directly from a Stihl dealer and it has issues every summer.. I know about changing the summer and winter setting I do that.. the problem is that once the saw has been running for 25 minutes it refuses to start again.. if I let it cool down it starts no problem.. I have read about a bunch of other people having exactly the same issue but I can find the solution..?.. I would rather not take it to the dealership because they clean it change the sparkplug and then charge me.. the issues seems to be fairly common.. any suggestions..?

Hi there can anyone help me with whether I need to be re setting my sthil ms 261 cm chainsaw when I am switching from winter to summer setting ?

G'day FLJ, None of my Stihl saws have got that orange tab ? It only gets below 10C at night in winter for a few weeks and I don't like to use a chainsaw in the dark 🇦🇺👍.

I have never changed mine here in Missouri if it’s that cold 🥶 I don’t go cut. My kids was like does are stihls have that I told them I would show them sometime

Very good!👏🌹 I❤stihl ms 261 c-m.

Buenas noches !!!! Para q es ese trocito de lamina de plástico q le quitas ala maquina , de al lado del motor ????? Es q la mía no lo lleva ... Saludos ...

Do you use Eco fuel in winter ? Fuel that does not make smoke....

Every time I’ve tried running my 362cm in winter mode, it lets a lot more chips and dust in the airbox. Good video, nonetheless. Enjoy your channel.

Cameras falling over?!?! I’m from Wisconsin! I knocked my drink over!!!

I will have to go back through the manuals. My MS361C had the tab to change it accessible from the outside, so no covers have to be removed. I haven't read about the summer and winter settings on older arborist or non-professional saws. Is this on every chainsaw or just the pro saws?

Wonder if the manual shows this I’m obviously a guy so we don’t read manuals. Now I have to go out in the could snow and ice.

SUPER 👍👍👍

além de a operadora de moto sserra e mecânica muito bom legar 👍

Just dissected a 261, the clutch drum bearing was gone 🤷🏻‍♂️ and that answers why it stalled when the brake was applied lol

Good video greetings! 👍🏼👍🏼👍🏼

Cheers to timba too!😄😄😄

Thanks

Great video And beautiful

Do all chainsaws very this type of setup? Like I've got an Echo.

Hmmm? I've never done any of that. I run my saws year round.

Ноw much STIHL 500i is it in dollars?

Is this only on newer saws or on ms260 as well?

what's the diffrerence between winter and summer setup?

Hi how r u woo I never knew that thanks for letting us know ur a star x

Hey treepeople.. 💚🌳👊👍🌳💚

3 in. Of ice here. Northeast Ohio need summer. Want summer must have summer

Like 🙋🏻‍♀️ 😍 😍 🤗 🤗 🤗 🤗

Hi girl. I have Husqvarnas what should I do ?

Hi there gorgeous how have you been doing good video as usual Nice dog what breed is he

io aggiungerei Un soffiatina al filtro....

Hi

I take my golden retriever out cutting or splitting all the time. She loves wood pyled because of the rodents

No Husqvarna anymore? ;)

Clearly people don't read those manuals. It's worth the half an hour.

Szia csini vagy,meg ügyi,ritka az olyan nő akit érdekel a favágás,puszi!😘👌👍🐶🐝🌲🌷

Du wolltest doch mal ein Video auf deutsch machen. Ich verstehe dich doch nicht 😂😂🙈🙈🙊🙊Aber deine Videos sind immer klasse 👍👍

Oh no, you're out of focus, Felixia 🤓🧐😂

Your beautiful

Много си готина мацка колежка

Lekkerwijf

Who was the bone? lol

boooooooooooooooooooooooooring