Thanks ever so much! Your tools certainly make it easier! Since this is a very rare task for me, I will probably opt to have the tire de-mounting and mounting performed at the local tire shop than purchase the kit to perform it myself.

That is a slick, robust tool. I wish I had had something like this last weekend while I was replacing a small tube tire on my power washer. The smaller tires are always more difficult.

*Well done Dag;* very informative.

my next project im going to make one of those tyre changes 1st stop scrapyard for materials ,thanks for showing .

Nice video! Cheers!

I wish I had that tool this morning!

I wish I had one this piece of kit 2 weeks ago! I fought for over 2 hours to get two 6" tyres off and back on again!

I have the same sealey tyre changer. Ive done car and motorcycle tyres on it. Get the sealey aluminium wheel bar. I have also done a 16 inch 205 4x4 pick up truck tyre on it. The only thing is the rubber on the clamps does not last long. I also put protective plastic over the plate that the wheel sits on to break the bead.

I wish my Husqvarna YTH2348 had threaded front wheel axles. American riding mowers have incredible amounts of slop in the steering and front hub assemblies. The manufacturers simply don't care.

Hi Where did you buy your Tire Mounting Tools. Do you have a link?

great video , could you get a quad ike and trailer and make another channel of you In the woods

Where did you get that round ended gooseneck tire changing lever? I can't find a tire tool with a rounded end like that. Thanks!

where did you get this from, looks good, keen to get somthing alike

Do you have any videos on removing rusted on back wheels on lawn tractor please ?

where did you get that tyre changing machine? i live in the uk. thanks

Did you apply a sealant to the rim? I didn't see you use one. Is a sealant not always needed?

Nice tool

Again, what is the model of the tire changing tool stand you are using. I've search eBay and googled what you indicated and I can't find it. Seems many people have asked and there is no link in any of the comments. can you please provide this? GREAT video by the way. THX.

Wonder if its the same for UTV/ATV and gokart tires.

nice tool

OK very good

Great video does anybody know if they sell these tire machines at harbor freight

You didn't show setting the bead, which is what I mainly wanted to see.

Of course it's easy when you have a tire machine

Is that sold in America?

Another great video, I did reply to your email about the Westwoods. Did you receive it? I know you're busy though. Cheers. (forgeal's other channel)

What is the name and model of that tire changing machine?

Name of Tool..? Link to the Tire Changing Setup if possible.. Thank you in advance. Cheers!

you thought me alot

is this your full time job

Dagger you got two many lawn mower to cut London football stadium LOL

you wont damage the bead putting it on or taking it off but you;ll damage the rim

Quite interesting. However this may be the easy way but definitely not the cheapest way. How much was that device? I had 1 tire to replace and it was a pain so I wasn't going to buy a special device for 1 tire. By the way how did you ever wear down that tire? it's a lawn tractor. Most lawn tractor tires just crap out from UV light and the constant freeze/thaw cycle. Mine was toast just from all those cycles. I'll keep on looking at other YT vids . But I o appreciate your vid. Cheers fro Canada.

why was the tyre bent

Take the tires to Walmart. They put mine on the wheels for $5 each.

While you were changing the tires, why didn’t you change the valve stem ? 9 times out of 10, if you don’t change them, you’ll have a flat. If the tires are that worn, don’t you think the valve stem is ? And by the way, the thing you take out of the valve stem is a valve core.

ok

Those are some heavy tires. 30 pounds...

Someone used a tire inflator out of the can.

Save more time = Cut the Old Tire Off with a Saw-all !!!

You should always replace a nyloc nut with a new one. The old one will not be reliably secure and in this case is a critical part. Reusing the old one is a newb error.

whe have countox tho its just ah shit machine its just grap the gearbox is crap