Harbor Freight Mini Tire Changer 61179 for Tractor Tires

No video

Harbor Freight Mini Tire Changer 61179 for Tractor Tires

Рет қаралды 610,413

6 жыл бұрын

amzn.to/32LRLNe Mini Tire Changer Cheap!
amzn.to/2Drytj2 Valve Stems 40 Piece
amzn.to/2BTfgGN Valve Stem Removal/Install Tool
amzn.to/2BQ7JIK Tire Spoons for working tire on rim
amzn.to/2Drg7yL Mini Tire Changer from Amazon
amzn.to/2BT6lF2 Four Way Valve Tool
In this video I show you how to change a tire using the Harbor Freight Mini Tire Changer 61179. This small tool works quite well.
Help support Doublewide6 Repairs LLC by sponsoring his Patreon account
/ doublewide6
Doublewide6 Repairs LLC has a Master’s Degree in industrial technology with a specialization in Manufacturing, due to factors beyond the control of Doublewide6 Repairs LLC and anyone featured in his videos, I cannot guarantee against improper use or unauthorized modifications of this information. Doublewide6 Repairs LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video or any of Doublewide6’ Repairs LLC's videos. Use this information at your own risk. Doublewide6 Repairs LLC recommends safe practices when working on equipment, power tools, chemicals, electronics, electrical systems, vehicles, and or with tools seen or implied in this video. Due to factors beyond the control of Doublewide6 Repairs LLC, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Doublewide6 Repairs LLC.

Пікірлер: 258

@doublewide6 6 жыл бұрын

@paulneighbors6066 5 жыл бұрын

doublewide6 Repairs LLC tire changer

@williamdelgadillo3292 3 жыл бұрын

I 9need ok boy 9pm

@robdixson196 3 жыл бұрын

Wearing a lawn tractor tire bald is a very unique accomplishment. It is something i have never seen before.

@H.R.6688 3 жыл бұрын

Exactly what I was thinking. I had tires 20 years old that still had plenty of tread. Lol

@paulstraw3837 3 жыл бұрын

Bought one these did not work as advertised. Tried to break the bede the center bolt bent. I ended up using a wide chisel to break the bede . tried

@bigboigamer4302 2 жыл бұрын

he really didn’t want to replace that valve i guess 😂

@ryanhitt7657 2 жыл бұрын

Not really I used to make em bald 24/7 hillbilly sports

@deanvancleave8233 2 жыл бұрын

That's a alignment problem. Tire wasn't worn evenly.

@bobengelhardt856 2 жыл бұрын

I've had this changer for a number of years and have struggled with it. Putting the cone-shaped spacer on over the lever is brilliant! I can't believe that the instructions don't show that.

@robbyddurham1624 Жыл бұрын

Thanks for taking the time to make a video on this. Does anyone else hold their breath while watching work videos? I catch myself needing to breath.

@Slambo2855 2 жыл бұрын

The smaller the tire, the harder it is to put on is RIGHT ! Thanks for the instruction.

@Big88Country 5 жыл бұрын

Man, that's actually the first time I have ever seen slick mower tires! That Husqvarna must have some serious power!! Good video on the use of the tire changer!

@beastinahalfmode 5 жыл бұрын

Know this is an old video, but for anyone curious. This would've been a fair bit easier had the tire been warmed up before installation. Either set it out in the sun for a good 30+ minutes, or use whatever you have to heat it up. It will make it far more elastic and if your tire is warped, like this one was, it will fall back into its intended shape on top of becoming more elastic.

@grazynazambeanie5963 Жыл бұрын

Thank you , something I just never thought about

@richardbennett6237 3 жыл бұрын

... Didn't realize the mini tire changer existed ... Thanks, you've just saved me a lot of sweat & tears, I'm headed to Harbor Freight right now ... ! I'm too old to bust my knuckles anymore

@martysmith6555 Жыл бұрын

Thank you for showing where the red tire bar fits under the aluminum cone shaped spacer. I couldn’t hold the tool down and the bead would not start under the rim. You helped me out a lot.

@john-paulmifsud5724 4 жыл бұрын

Thank you!!! After watching your video I bought this from harbour freight and was able to change the front 2 tires on my ride-on mower. Your video gave me the confidence to try this myself and some tips on how to do it.

@cornwasher 6 жыл бұрын

Excellent video and shows how easy it is to deal with these small tire/wheel combos with the right tools.... Thanks man!

@13bravoredleg18 5 жыл бұрын

Changed 8 tires with it and it's already paid for itself! Great little tire changer!

@rogeroconnor5182 6 жыл бұрын

best 37 dollars i ever spent,it aint the best but it gets the job done. i use a vise grip on one side to hold the top bead in place when installing.

@michaelwhitmore3979 3 жыл бұрын

michael Whitmore I made an improvement to mine that works great. most small wheels have at least 2 holes thru them, I added a few links of chain and a eye bolt. I attached the chain to the base and run the eye bolt thru one of the holes and put the nut on. Now the wheel wont turn when you are working on it, one that didnt have a hole I popped the valve stem out and ran the eye bolt thru that hole . Really Big improvement on this tool and works great

@bv2999 4 жыл бұрын

Just a helpful note on Mounting the Changer so you can use it. If you don't have a Vise mounted to a sturdy bench you can get a 4 foot legnth of 2x6 or 2x8 and Bolt the Tire Changer on to that. Then put it in your Driveway and simply role your car or truck onto the end of the wood. You have to kneel to use it but it's locked solid.

@michaelhendricks7117 Жыл бұрын

Use 4 lag bolts to secure it to the top of a tree stump. And put blocks of 2x4 under the side of the tire you're putting pressure on to prevent bending the all-thread.

@oohdelolli2334 Жыл бұрын

i watch this and wish there was just a cool shop where anyone could drop off their stuff and you could fix it. You have ALL THE STUFF!

@facereader99 3 жыл бұрын

I like the fact that you put the valve side down. Similarly, you locked the rod under the disk that stopped the rod from moving out of the position where it is supposed to be, between the tire and the rim. Bravo and thank you!

@rodneywelch3556 3 жыл бұрын

Thanks for the demo! I’m in my yard struggling with my first lawn tractor tire change and these are no joke!! Car tires are easier by far!! New sub with all new vids coming my way!!👍🏽😎

@thelonewolf267 5 жыл бұрын

Bloody effing hell where was this video a week or so ago when I changed my exmark tires!!!

@StingerSecSol 5 жыл бұрын

I have one on my lawnmower service truck. Love it, so easy to use.

@nashguy207 6 жыл бұрын

Thanks for sharing Bob. I have thought about getting one of those for a couple of years for my equipment looks like they work pretty good. Happy new year my friend and love and prayers for the little man!!!

@johnarmstrong5953 5 жыл бұрын

I appreciate this video but if I learned anything from trying to do my mower tires myself last time it is that I would be happy to pay a tire shop to do it next time no matter what the price. And I am the type that absolutely HATES paying someone else for doing anything I think I can do myself...

@robertduncan2742 Ай бұрын

One can place the tire in the sun to make it more pliable, these small ones can be crazy great review

@robertheinkel6225 5 жыл бұрын

I just placed the tire on the ground and used a bottle jack against my hitch to break the bead. Then put the bottle jack in the center of the rim, and against the hitch, to stabilize the rim to remove the tire. Works pretty good if you don't have an actual tire changer.

@clarencethibodeaux1139 3 жыл бұрын

Make a video

@alssmallengines 6 жыл бұрын

Great vid Bob! I've been thinking about getting one of those. Looks pretty easy compared to doing it the old school way.

@RelentlessHomesteading 5 жыл бұрын

Well described wheel video - Thanks. Need to do mine soon - going to an ATV type tires. Been driving mine with chains on for last 5 years to have enough traction.

@88bigten 5 жыл бұрын

Thank you for this video. I suffered through getting one old Carlisle tire off and new one on. This video SO much better. I will check out your setting bead video. My new tires were smushed and I ended up taking one to shop.

@paulbillings1791 5 жыл бұрын

By entering the tire size on Amazon,you can find good deals on a set of two and quite a few brands are 4 ply and haven't been "strapped" meaning they aren't squashed when they arrive. It makes replacement waaaaay easier.

@Pyridox 6 жыл бұрын

Thanks for the video. I just bought one the other day (used my 20% coupon). I bought it after struggling withe removal of my 2-stage Snapper snow blower tire, I'm hoping this makes my life easier if I need to use it on one of my other machines as well.

@PapaCubScout 4 жыл бұрын

I can't get anyone to fix my flat lawnmower tire. In the middle of this coronavirus, this video helps me a lot. Thanks-

@tonym6920 6 жыл бұрын

Hey DW6, looks like a good workout, lol. Great video, Thanks

@charliegcanadianpatriot7781 3 жыл бұрын

Great video. Thanks for taking the time and effort in showing how the changer tool works. Two thumbs up !

@terrylarotonda784 6 жыл бұрын

Hi Bob, glad you purchased that tire changer. If you remember several months ago I asked you if you had one. They make small tire changes a snap. Hope you all had a great Christmas, looking forward to the new year.

@hectortrejo8548 4 ай бұрын

Great video!!! Just what I needed to replace the tires on my John Deere!!! Thank you!!

@travishouse6295 5 жыл бұрын

Little 15x6.00-6 tires are a pain in the ass to put on. I own a mobile tire service and those are by far the hardest ones to mount and I do big rear tractor tires all day.

@larrys7998 10 ай бұрын

Best video on KZfaq for tips ..especially the tip about the cone adaptor!!!

@9251finley1 Жыл бұрын

Thanks for posting that video. I was struggling get the last part of the tire on. When I followed the different way you stacked the nylon spacer and the disc I was able to get the tire on.

@ricktokle5848 6 жыл бұрын

😎🇺🇸👍 Hey Buddy! Nice work definitely need that nifty tire buster for this job. Harbor Freight comes in handy for specialty tools you don’t want to spend an arm and a leg on, or rent.Keep up the great videos.

@boat6868 6 жыл бұрын

Excellent video. Looks like a decent product. Mounting small tires is nothing but misery if trying to do it by hand.

@speedyz4 4 жыл бұрын

For the money it works great Had a lawn service for 30 years Save me a lot money and time

@billhendrickson5506 2 жыл бұрын

The number one trick to easily changing tires is wetting the tire rim part. You aced it.

@RedfishInc 6 жыл бұрын

Ha! First wore out tractor tire I've seen that wasn't full of slime.

@donf3739 2 жыл бұрын

If you forget the valve stem, there is a tool that installs it from the outside of the wheel. It uses a rod like the one you have, only not jointed, and a cone that you push the lubed-up stem through. Personally, I usually put a tube in a new mower tire, because they always seem to leak eventually.

@michaelroebuck4828 5 жыл бұрын

I always mark where the valve stem is on the tire. I have had locust thorns break off and you not find them feeling around the tire. With stem marked, you can find the hole and make sure you get the piece our and not have to patch it again. I do love the video, I will definitely use the bolt next time instead of holding the tire or breaking it down while still on the tractor.

@robertsprouse8237 5 жыл бұрын

I used this yesterday and it kick my ass.The bead breaker works great and getting the tire off was all right. Putting the tire on was another story. Getting the first part was good. But to get the last bead on was difficult I try your set up I have 20x12-10 tire and could not secure the rim done . I ended up putting on ground and work it around what a pain in the ass. But I got it done.

@aleblanc3547 6 жыл бұрын

Tires are crazy...so simple, but a real tough install sometimes. I love this little machine for small tires...it's hard to beat the price, especially if you change more than a couple of tires a year or if you have neighbors who don't mind buying the beer to watch you change their's. :>)

@namvette68 2 жыл бұрын

Let's see him do it with a tube type tire!

@lrcb40 5 жыл бұрын

Nice vid. Helped me a lot when I had to do the same. Probably never use the HF tool again, if anyone wants to buy mine...

@wintermachine 2 жыл бұрын

Nice video. Ive been holding my rims by 2 punches in the vice, there is 2 holes for weights on my rims. I like the looks of that tool, I will get one. I prefer a 412 valve stem which is the shortest I've been able to find. I put valve stem towards center of tractor, and weight on outside of rim. Valve stem on outside of rim is more likely to hit an something.

@roybrown6687 6 жыл бұрын

that sure beats trying to mount small tires on the ground have to pick me up one of those thank you for the vid

@waynesmith9765 3 жыл бұрын

I disagree. I can fix one with a breakdown spoon 2 screw drivers and vice grips just as fast or faster and I have one of the tools he is demonstrating.

@barbaraatkinson5031 3 жыл бұрын

Worked for me and I'm an old woman. I just had to use a third screwdriver to hold my place a few times.

@brandonmwms 4 жыл бұрын

You, sir, are awesome! Thanks for this video!

@martinbenton742 5 жыл бұрын

Great video. Looks like you got all of the goodie out of the old tire, (no tread left in the center). If that was a car tire, it would be hung on a fence post with, No Hunting painted on it. Lol

@edconnor6697 4 ай бұрын

Thank you. I have the same tool. i could not get the second bead on. Putting the removal/install tool under the cone is key! thanks again!!

@pl747 Жыл бұрын

I made a mount for this that fits into my receiver hitch. It sticks out far enough that the tailgate will open and the main leg is adjustable up and down. I use mine a lot and I made another cup with a rubber gasket from an irrigation pipe that drops over the main 5/8" shaft so when I tighten the top nut it clamps the wheel from both sides with rubber. Wheels do not spin in it now. I also made me a T handled wrench that fits over the top nut so i can spin it down real quick and really tighten it. It works really good now.

@thostube13 2 жыл бұрын

Wish I seen this video before replacing the front tires on my tractor. Would have gone more smoothly if I had used the cone shaped spacer the way you did. Helps to keep the tool in place under the tire bead when installing. Thanks for posting.

@macmorgan6685 6 жыл бұрын

Great videos! Not sure you mentioned it but the rim has a “drop- center” that you use when dis-mounting/mounting the tire. Place the tire bead in the drop center and then the opposite side of the bead can be easily slip over the wheel rim.

@jonb5817 3 жыл бұрын

You da man! Been a snake. . . . . Thanks!

@dkeith45 Жыл бұрын

Yup. Found that out the hard way. This is especially the case if it's a deep set rim that has a deep side and a shallow side. That 'drop center' you mention is on the shallow side of the rim and the tire can only be removed and reinstalled from that shallow side.

@farmerwayne1404 Жыл бұрын

According to the " manual" ... rim, Round aluminum centerer piece, spacer, top nut. Thanks man!

@ralphebuffalo 6 жыл бұрын

Great video. Thanks.

@gone2dmtns 3 жыл бұрын

It must be comforting to know that if the tire changing gig doesn't work out there will always be a place for you in the bear wrestling arena. 😆 Nice job man!

@garykendall1376 Ай бұрын

A pair of vise grips on the wheel when mounting the tire helps immensely

@lawrencebeals7456 5 жыл бұрын

16$ is what the lawnmower shop charged me.nice video, thanks.

@carlbamburg7439 4 жыл бұрын

I haven't had to change lawn tractor tires yet, but I DID remove old and install new tires on a small boat trailer a couple of years ago.. It was a TON of sweat-popping, knuckle-bustin work to get them off and on WITHOUT a proper tool.. The main issue was stabilizing that small rim enough to get the amount of leverage you need to work.. it's nearly impossible to stand on a 6 or 8 inch rim lol..

@shanebretey373 6 жыл бұрын

Nice video man, thanks.

@michaelcummings6178 4 жыл бұрын

Use visegrips on upper rim to keep tire from rotating around & around on the rim tire wont keep spinning around and off ( on installing )

@zoolanderfred 6 жыл бұрын

Nice demo!

@craigmonteforte1478 5 жыл бұрын

Seems like the changer works pretty well for those little tires and rims I guess the big trick is to use thar soapy solution as you mentioned my son had a 4 wheele growing up and those were a pain to change without any changer i had Antique tire irons that came in a Antique cars factory tool kit i owned years ago they worked but it wasn’t as easy as your way

@voiceforthevoicelesstruth5480 2 жыл бұрын

Awesome I just bought 2 tire irons and wrestled my tires on old school and then knocked out my front tooth with the tire Iron. Saved $40.00 dollars on the tire install and spent $1,000 on my front tooth I could have just bought a new lawn mower now!! 😂

@robertcrum6169 5 жыл бұрын

Newb to your and your video really helped. SUBSCRIBED!!

@reeb9016 5 жыл бұрын

Very cool! Bet you can't go as fast though after replacing those racing slicks. 😉

@rebeltaz123 3 жыл бұрын

Dude! I know this is an old video, but that is so much easier to do with a couple of tire spoons with the wheel on the floor. I just did three today in the shop without working as hard as you did! Now, I do have a full sized titre changer that I use to break the bead, but still....

@HIGHASAKITE1991 5 жыл бұрын

Very good instruction video.

@Jeremy-iv9bc 4 жыл бұрын

Ha I'm going to have to get one of these. I did find out it's easier if you install them from the front side of the rim because the front side of the rim is a lot smaller than the back side.

@chrisunderwood4865 Жыл бұрын

Nice simple video.Thanks

@FightNight2012 3 жыл бұрын

Great Video! Very informative. Thanks, A lot.

@charliehart1626 5 жыл бұрын

Cool vid DW, I just take them to the tire store and let them mess with it . Can see where if you own a business and do it a lot.

@wheelchairwarrior72 Жыл бұрын

I change small tires every day in my mower repair shop. I use two pry bars and can change three out in the time it takes to use this contraption to change one.

@fendermann1825 6 жыл бұрын

Great video, and hey..... as far as the light from the window goes....... throw some tint on it. It’s super easy and cheaper than a window shade probably

@asleepinthealley 4 жыл бұрын

A little 'rubbing alcohol' on the valve stem would make it much more 'slippery' than soapy water and make it slide into the hole much easier.

@christinewoodruff255 3 жыл бұрын

Wish I could just rent one, prolly only gonna use it twice in a lifetime, still good video, thanks much.

@skidooextreme2233 6 жыл бұрын

I have never seen anyone use a tire valve stem installer tool for removing. Seems easier to remove the core and then cut it

@robc.5745 5 жыл бұрын

you can get them at a real auto parts store they work well.

@shaunannis 5 жыл бұрын

I use my tool to pull my tires come out and to put it in

@KyGun 4 жыл бұрын

Well don't watch this guy he didn't use the stem installer correctly.

@dodgeramsport01 4 жыл бұрын

@canuckguy worried how would this wreck the tool! Its still pulling it?

@dodgeramsport01 4 жыл бұрын

@@KyGun why did'nt he?

@harriettedaisy2233 5 жыл бұрын

I was looking at this the other day. Most tires I can do no problem, but that 1 tire out of 20...... I think I'm going to pick that up this weekend.

@PeterEndelt 6 жыл бұрын

Super video 👍

@robviolin1 4 жыл бұрын

Helpful, thanks 👍

@monk5470 6 жыл бұрын

Nice job.

@AlOdd123 3 жыл бұрын

That same soap water mix that was helpful with removal and installation of the tire, is also equally helpful with a new valve stem

@waynesmith9765 3 жыл бұрын

Thats why he used it.

@shanekasper4587 2 жыл бұрын

@@waynesmith9765 you beat me to it, lol.

@mxr248 2 жыл бұрын

It’s a lot quicker with tire spoons and heavy rubber mallet. Cool little tire changer though. Didn’t know harbor freight had that.

@dnplumber1 6 жыл бұрын

great video.

@dukenukem5768 5 жыл бұрын

Don't think I'm as strong as you but I change my tyres with three old-fashioned tyre levers. If needs be, I break the bead by laying the wheel on the ground, placing a strong plank on the sidewall, and drive a car onto it.

@jttaylor5236 5 жыл бұрын

Good job.

@E46TY 6 жыл бұрын

This video is really helpful. I might have to go buy this from harbor freight to get my new tires on my minibike. Only problem... my wheels are freshly powder coated and i already chipped a bunch off just using plastic trim tools and screwdrivers. I think this is even worse

@curiosity2314 6 жыл бұрын

Happy New Year 2018 in advance..

@1575murray 3 жыл бұрын

Mounting snowblower and other small low pressure tires have their own challenges due to their width and small diameter as opposed to car and truck tires. Be aware that they are low pressure tires and don't use too much air pressure when trying to seat the bead as that could cause the tire to explode. Liberal amounts of soap and water can make this job easier.

@debraclifton8213 3 жыл бұрын

Will that mini tire changer work for 9 inch zero turn tires? GREAT VIDEO!! Love the narrative

@oneshothooligan6279 Жыл бұрын

The only video I actually seen using the tool correctly everyone never uses that flange aluminum piece in the correct area

@brucekube858 5 жыл бұрын

I would have liked to watch you make it take air. LOL... I had to use my big air burst tank that I use for my semi tires to get it to catch the bead.

@420visions 2 жыл бұрын

Nice one, thanks.

@joeo1352 6 жыл бұрын

Good video

@boatman19607 3 жыл бұрын

Wow good job and you sure got your money’s worth from that tire lol!

@edwinmcguire6040 3 жыл бұрын

Use a small block of wood for leverage , that stem should come out a lot easier. And I've used my valve stem Puller for Installing and......Removing, Works fine. Also used diagonal cutters to remove them, up to your preference.