How to change a tire on a John Deere

Рет қаралды 246,132

5 жыл бұрын

How to remove and install a front tire in a John Deere D100 series tractor.
If you just have a flat tire and the tire is in good condition? Just install a tube, no need to replace the tire. Here is a link to. How to install a tube in your lawn tractor tire. • How to Repair a flat t...

Пікірлер: 188

@Voartist 3 жыл бұрын

It's nice to find videos that show exactly what the title says. This is just what I was looking for. Great video! Thank you.

@jurisvzauls2263 18 күн бұрын

I just gave up on a 15x6.00-6 and came to youtube. watching this a few times for inspiration!

@TinyHouseHomestead 15 күн бұрын

Finally someone who knows what the hell they are doing! BEST tire replacement video ever! 😱😁😝🤪👍👍🇺🇸

@adamelam6385 2 жыл бұрын

Watched nearly the whole video before I noticed the missing hand. Kudos for your tenacity.

@JohnsonsSmallEngines 2 жыл бұрын

Thanks. I was born that way so I know no different. I hope the video was helpful to you. Please give this video a thumbs up and tell your friends about my channel channel to help it grow. It would be greatly appreciated.

@HereWeGo0o0 Жыл бұрын

One handed. I can’t do this with 4!! Awesome job by a guy who knows the value of work!

@banarcus 5 ай бұрын

Mate, great no nonsense straight to the point video. Thanks for helping out a brother down under!!

@JohnsonsSmallEngines 5 ай бұрын

I’m glad it was helpful and thank you for the kind comment!

@juanperez-fx5uw 5 жыл бұрын

Mannn i work at a tire shop and take almost 30 min just to do one and props to you brother you did it like nothing wow you an inspiration keep it up gee

@markbrad675 4 жыл бұрын

Great job,took me forever trying to do this on a work bench,never thought of using my knee, You made this look easy,told myself I was never going to change a lawn tractor tire again,should have watch this before I did mine,,,feel like a DUH now...Thank you for the tip,I use my knee next time.....

@yogibeer9319 5 жыл бұрын

At 7:22 your advice on pushing the tire down as far as you can REALLY helped me on my L120 tire I was replacing. I thought I was a complete dumbf**k but it was just a trick like that that did the job. I was really fighting that tire till then. Now I’m only half a dumbf**k Great video!

@carlososborne2866 5 жыл бұрын

Yogi Beer I have a rear tire that needs replacing on my LA120. But Im having a hard time removing it. I have sprayed it with wd40 for 4 straight days and but its not move at all

@cb7pwn 2 жыл бұрын

Kudos for doing this kind of work with a nub! Mad respect

@TFBITRCY 5 ай бұрын

Thank you very much from a real klutz (but safe) around the workshop. I literally was taking an action, coming back and viewing the video, stopping the video, taking the next action, etc. etc.. Very useful hands on video.

@JohnsonsSmallEngines 5 ай бұрын

Glad it helped!

@petewiltfang 4 жыл бұрын

You made this look too easy, now I'm gonna have to do this myself. Thanks for the great video!

@vincedavis4393 3 жыл бұрын

Changed my John Deere tire today using this video. Thanks again

@JohnsonsSmallEngines 3 жыл бұрын

I’m glad it was helpful. Thanks for commenting and watching!

@mikecatg 4 жыл бұрын

After watching videos of using a Harbor Freight tire machine and tools, I’m thinking maybe I made a mistake thinking I could try on my own. After watching your video, I feel better. Plus I learned a few things I didn’t think of. Awesome video. Thank you!!!!

@johnnypare7426 4 жыл бұрын

How you do that with only one hand amazes me

@MarksTips 5 жыл бұрын

Excellent video. Great tips. You just made my tire changing job a lot easier.

@Torsee 5 жыл бұрын

Excellent Video ! Best I've found! I have two to replace on my 2007 JD! Thanks for posting.

@BikerInAHat 4 жыл бұрын

I was about to give up getting the new tires on until I saw this. Thanks for posting!!!

@SeainStone777 2 жыл бұрын

I inherited a D110 with the property I bought. Time for new tires as Slime isn't working anymore so needed a good tutorial on swapping out tires, and this was it!! Great video shots, very good description so you don't have to guess what you mean, and overall excellent tutorial video. I'm headed out now in the 100 heat to give it a go. Thanks ahead of time. :)

@JohnsonsSmallEngines 2 жыл бұрын

Hi Maren, I'm glad this was helpful and thank you for the kind comment, Please give this a like, subscribe and tell your friends about my channel to help it grow. It would be greatly appreciated. Thank you for watching!

@cesarguerra9127 4 жыл бұрын

I have a 7 year old 140 D John Deere and had to replace the front tire watch your video I started about at 8 p.m. and finish about 11 p.m. it was tough getting that tire out but I got it watch your videos the main thing is like you said do it on little bit at a time thanks guy I just like And subscribe keep on making good videos talk to you later!!!!

@roscopcoltrane1421 Жыл бұрын

I have a JD S120 and the rear tire went flat thanks to a piece of wire that went into the side wall. I thought about just buying a new tire with rim to make it easier, but after watching your video, i am going to buy the replacement tire only. Thanks for posting a quality well explain video, it’s appreciated! Now, its on me to get my tire off that rim, lol! Great video! Thank you.

@JohnsonsSmallEngines Жыл бұрын

You can also keep the tire, put a patch on the inside of the tire where the wire went through it, then put a inner tube in the tire. I do not have a video on it but I will do one when the opportunity comes up.

@samallsop6700 2 жыл бұрын

The knee trick was the key to getting the new tore onto the rim. I spent the better part of an hour goofing around, trying to somehow hold the rim secure, and finally giving up and checking KZfaq. After sifting through a bunch of useless videos, I found this one, skipped to the part I wanted to see, then it took less than a minute to get the tire on. Thank you!

@JohnsonsSmallEngines 2 жыл бұрын

I’m glad it was helpful and you finally got the job done!! Thank you for watching and the kind comment. Please give this video a thumbs up to help my channel. It would be greatly appreciated.

@samallsop6700 2 жыл бұрын

@@JohnsonsSmallEngines Another great tip. removing the valve core and using a blow gun to get the bead seated, much better than using an inflator chuck. You're full of great advice here. I've spent 45 years wrenching on stuff and your 12 minute video gave me two great tips that I'll use. Thanks again!

@cheeku6119 4 жыл бұрын

You rock man! Awesome and very simple directions.

@philbradfield5275 3 жыл бұрын

Thank you for posting this! Huge help.

@chris.humm89 2 жыл бұрын

Thank you so much, buddy. This tutorial was a life-saver.

@JohnsonsSmallEngines 2 жыл бұрын

I’m glad the video was helpful! Please give this video a thumbs up, subscribe and tell your friends about my channel to help it grow. It would be greatly appreciated:) Take care!

@dalerbsr.5061 4 жыл бұрын

Thank you so very much, this video made my day a lot easier!

@lyleswan6671 2 жыл бұрын

Wow, thank you for a "real world" scenario. I watched another channel where the tire almost fell off and back on, not typical at all. You are the effin man dude! Did one last night on a old L 120 and struggled to break bead. Ended up using tire iron as a chisel with a hammer to break bead. After that it was pretty gravy. Your slide hammer is bad azz. I am definitely going to make one of those.

@JohnsonsSmallEngines 2 жыл бұрын

I’m glad it was helpful and thank you for the kind comment. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated:)

@jimkalfakis9893 4 жыл бұрын

Yup! I did em! This helped me tremendously, thank you man!

@nycupperes 4 жыл бұрын

Excellent video and you’re an inspiration.

@Luv2flyMD 3 жыл бұрын

I tried to get my JD front tire off the wheel for two hours (with two hands) and still couldn't get it off. Very impressive!

@JohnsonsSmallEngines 3 жыл бұрын

Thanks, I’ have had a lot of practice.

@ProteusDIY 2 жыл бұрын

Thanks for posting this video. Just got myself a free X300 and the rear tires were shot. Not the most pleasant thing to do but thanks to your video I was able to do it myself. Thanks!

@JohnsonsSmallEngines 2 жыл бұрын

Mom glad you were able to get the tires changed out. How many hours are on the tractor?

@ProteusDIY 2 жыл бұрын

@@JohnsonsSmallEngines 118. 2014. Not much. It probably sat outside most of its life. Key was rusted up pretty good. Battery dead. Fuel a bit funky but it runs and runs smooth! I have videos of it purring away on my channel. Trying to decide if I want hdap or versa turf tires...but it looks like the versa ones don't come in 20/10-8. And I don't know if it's a good idea or not to mix different treads front and rear although the majority of the traction is going to be at the rear. Fronts were ok. Held air.

@stevesls007 2 жыл бұрын

Great "How-To" presentation! THANK YOU!

@JohnsonsSmallEngines 2 жыл бұрын

Hi Scott, I'm glad it was helpful and thank you for the kind comment. Please give this video a thumbs up and tell your friends to help my channel grow. It would be greatly appreciated. Thank you for watching.

@Wugawamp 3 ай бұрын

Great advice and job! About to tackle this on the rears of my D140. 2 ply coming off, 4 ply going on. Should be lots of fun. Thank you for the demonstration. Nice work.

@JohnsonsSmallEngines 3 ай бұрын

It’s the little things sometimes that makes it it easier:). Take your time and you’ll be fine! Thank you for watching and the kind comment. Please give this video a like and share the channel to help it grow. It would be greatly appreciated.

@JuanTorres-yf1dg 2 жыл бұрын

Wow, you are the best, I try other utube videos and they didn't help and I saw your video and I mount the tire on the rim in about 2 mins. Thank you, thank you. You are great.

@JohnsonsSmallEngines 2 жыл бұрын

Great to hear! Thank you for the kind comment. Please give this video a thumbs up and tell your friends to help my channel grow. It would be greatly appreciated! Thank you for watching :)

@roxiepoe9586 4 жыл бұрын

Thank you so much.Your instructions were clear and I just went out there and did it! I feel so good!!!!!!!!!!!!!!!!

@jackturner1156 4 жыл бұрын

You Sir.. Are the BEST!

@jerrylalonde1646 Жыл бұрын

I watched your video and followed it right to the T and it worked for me thank you very much thumbs up for you for you

@JohnsonsSmallEngines Жыл бұрын

Thanks Jerry, I’m glad it was helpful!

@Prajyot101 4 жыл бұрын

Man, you are so very helpful!!!

@bobbyhigginbotham8205 4 жыл бұрын

Great video.... I needed this thanks for posting

@kennichols3992 Жыл бұрын

Thank you. I rolled a tire off the rim (yes, by screwing around with tight turns at speed), and this has all the info I need+.

@JohnsonsSmallEngines Жыл бұрын

I’m glad it was helpful! Thank you for watching and commenting.

@loganb.768 4 жыл бұрын

Thanks alot buddy, you helped me with this video!

@bobchu2121 5 жыл бұрын

Thank you.very helpful video!

@dmb619 5 жыл бұрын

Excellent video, thanks.

@GG-zs5sz 4 жыл бұрын

Great thanks for taking the time on this

@LockingDevice 2 жыл бұрын

Thank you for this video! There are very few places to get a John Deere Riding Mower serviced so we had better get good at servicing on our own.

@JohnsonsSmallEngines 2 жыл бұрын

Hi Aaron, I’m glad it was helpful and thank you for the kind comment. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated.

@lordofdunvegan6924 4 жыл бұрын

Great vid, very useful. Thanks alot.

@islanddogstudios9004 Жыл бұрын

Thank you for the great video. I was going to have a pro change the tire. After watching this video, I feel like I can tackle it.

@JohnsonsSmallEngines Жыл бұрын

Take your time and hopefully the tire will be in warm conditions. It helps a lot to have the tire pliable as much as you can while removing and installing.

@gkey63 2 жыл бұрын

Thanks dude. Awesome instructional video.

@JohnsonsSmallEngines 2 жыл бұрын

I’m glad it was helpful. Thank you for watching and commenting. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated.

@joe78377 2 жыл бұрын

You are the man. Thanks for your knowledge.

@JohnsonsSmallEngines 2 жыл бұрын

You bet, I'm glad it was helpful!, please give this a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated. Thank you for watching.

@davidsnyder4801 4 жыл бұрын

Great video....and you dont even mention how much easier it would be with two hands....

@michaelterechow1859 4 жыл бұрын

You make it look easy.

@jgraham6102 5 жыл бұрын

Thanks for the info!

@drcoffee5588 Жыл бұрын

Nice video. Honestly, I found a small tire shop in town to install my new walmart tires for $10 each. Well worth the gas and cost to let someone else wrestle with it..

@drdoerder 2 жыл бұрын

Wow, you've got some skills!

@chriscampbell3059 4 жыл бұрын

Thanks for the video man

@AndrewFernandes007 4 жыл бұрын

Great video, thanks!

@TheKr32 Жыл бұрын

Excellent video. Thank you

@JohnsonsSmallEngines Жыл бұрын

I’m glad it was helpful and thank you for the kind comment:)

@Routh290 11 ай бұрын

Perfect video ! Thanks a bunch !!

@JohnsonsSmallEngines 11 ай бұрын

Your welcome! I'm glad it was helpful and thank you for the kind comment.

@johnbrunelle9869 2 жыл бұрын

Thanks this video really helped me...thank you!!!!

@JohnsonsSmallEngines 2 жыл бұрын

I’m glad it was helpful. Thank you for the kind comment.

@TommyTester 5 жыл бұрын

I assume after you put on new tires that the deck has to be releveled? You sure make it look easy. I bought one of the Harbor Freight small tire changing stands and that works good too. Thanks.

@stevealaska73 5 жыл бұрын

Thanks for sharing!

@jimanderson2518 4 жыл бұрын

You'd BE the MAN!!!!!!! THX!!!!!!!!

@donnagavin4539 2 жыл бұрын

You made that look easy. Ty

@JohnsonsSmallEngines 2 жыл бұрын

Practice, practice, practice and hundreds of tire changes later. I just hope the tips and tricks help you get the job done! If you liked this video, please give it a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated. Thank you for watching:)

@wokeproof 2 жыл бұрын

thanks for the video one armed bandit. gained a follower

@JohnsonsSmallEngines 2 жыл бұрын

LOL, I’m glad it was helpful and thank you for supporting the channel.

@krowbar23 14 күн бұрын

That's awesome show, thank you sir. 😊😊

@tylerduggan5836 3 жыл бұрын

Thanks for your help!

@JohnsonsSmallEngines 3 жыл бұрын

👍

@carmenlamanna5391 10 ай бұрын

I use a heat gun to take off dust caps. I know I would ruin them with a torch. Awesome video.

@JohnsonsSmallEngines 10 ай бұрын

Thank you. I’m glad it was helpful. That was a learning how to make a video, for me. I must make all videos easy for anyone to perform and after some comments , I may talk about using a torch but as you would do a heat gun is the way to go. I will not be using a torch in any more videos. Please give this video a like and share my channel with your friends to help it grow. It would be greatly appreciated. Thank you for watching:)

@mariososa6854 Жыл бұрын

Awesome streat to the point.👍

@JohnsonsSmallEngines Жыл бұрын

I'm glad it was helpful and thank you for the kind comment:)

@jasonleee9401 2 жыл бұрын

Nice work, thanks

@JohnsonsSmallEngines 2 жыл бұрын

Hi Jason, I’m glad it was helpful. Please give this video a thumbs up and tell your friends to help my channel grow. Thank you for watching and commenting.

@ChrystieErskine 2 жыл бұрын

Awesome video!

@JohnsonsSmallEngines 2 жыл бұрын

Thank you for the comment, I’m glad it was helpful, please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated:)

@RScott413 2 жыл бұрын

Heh. this is great. I have never changed a rear tire but a have definitely changed the front ones or removed them. I just break the bead while it is on the tractor before i lift it by kicking it, works every time. Of course mine are typically flat because I ran over some sharp ass tool my son left in the back 40.

@jahkyleezy1315 4 жыл бұрын

Nice job

@carlcleary548 8 ай бұрын

Thanks that great idea 👍

@JohnsonsSmallEngines 8 ай бұрын

I’m glad it was helpful and thank you for the kind comment:)

@mschiffel1 4 жыл бұрын

No bubbles = No troubles.

@cbdyna Жыл бұрын

Thanks for the vid. I have an LA 145 and cant seem to get the front wheels off; there end of the hub is bigger than the hub it appears. And it appears it is designed this way.

@mikedaniels85 Жыл бұрын

Nice job!!!

@JohnsonsSmallEngines Жыл бұрын

Thanks Mike! I’m glad it was helpful:)

@SeanCeschia 4 жыл бұрын

Nice. Thanks

@americansmark 2 жыл бұрын

Just replaced a flat. Whoever put the tire on the rim used red loctite to bond the wheel to the rim. I had to cut the tire off and spend an hour breaking the seal with a blowtorch and elbow grease. If I weren't so stubbornness, I'd have gone back to Tractor Supply and just swapped the tire for one already mounted on a rim.

@JohnsonsSmallEngines 2 жыл бұрын

Nice work hanging in there to get the job done! Thanks for watching and commenting! Please give this video a like, subscribe and tell your friends to help my channel grow. It would be greatly appreciated :)

@abelgonzalez7608 4 жыл бұрын

Got it thanks 👍 man

@Ricardog48 Жыл бұрын

Bro ,thanks alot , my fat ass was doing wrong ,I be following u bro thanks again

@mtz9939 3 жыл бұрын

Well done!

@JohnsonsSmallEngines 3 жыл бұрын

Thanks! And thank you for watching

@richer4poorer 2 жыл бұрын

Well Done thank you!

@JohnsonsSmallEngines 2 жыл бұрын

I’m glad it was helpful! Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated:) Thank you for watching!

@cesarvargas2386 4 жыл бұрын

Good very good thx.

@rmgibbs1861 2 жыл бұрын

Thank you Sir!

@JohnsonsSmallEngines 2 жыл бұрын

Your very welcome! I’m glad it was helpful and thank you for watching. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated.

@texomatinker414 3 жыл бұрын

If you have too big a gap between the rim and the new tire and are having trouble pressurizing it, a ratchet strap (or cord of some type) cinched around the tread will help push the bead toward the rim and make it easier. Sometimes you can just stand the tire up and push down on the tread while pressurizing, but that doesn't work as well.

@JohnsonsSmallEngines 3 жыл бұрын

Yes but remember that if you over pressurize the tire when using a ratchet strap you can hurt yourself when you release the ratchet strap so be very careful!!

@ron4413 Жыл бұрын

You did that like you knew what you were doing. Took me 2 hours just to take the tire off the rim. Probably another 2 hours to mount a new tire.

@JohnsonsSmallEngines Жыл бұрын

It depends on how old the tire is and the temperature your doing at. Some old tires are a pain to get off. The new one should be easier and follow how I use my knee to give you that little extra. Patients!!!! :)

@ron4413 Жыл бұрын

@@JohnsonsSmallEngines Thanks, it's a 1991 JD i bought new in 91. I will use my knee for sure.

@ron4413 Жыл бұрын

@@JohnsonsSmallEngines Thanks, It's a 91 JD I bought new in 91. I will use my knee for sure.

@oe542 2 жыл бұрын

Did you just do this with one hand???? Yesterday I tried to do this and I have tools and air and am fairly handy. After denting the rim and scratching it all to heck I gave up. I feel like an idiot especially after watching this video. Good work!

@JohnsonsSmallEngines 2 жыл бұрын

I sure did, LOL. I was born that way so it was easy to deal with everything, plus I have changed thousands of tires. The trick is getting the tire bead in as close to the center of the rim before prying the other bead off of the rim and as I say "baby steps" small bites will make it also easier.

@442recruiting2 Жыл бұрын

Nice thanks

@JohnsonsSmallEngines Жыл бұрын

I'm glad it was helpful.

@Anonymous-it5jw 4 жыл бұрын

What do you run your rear tires at? Thanks for a great and useful video.

@JohnsonsSmallEngines 4 жыл бұрын

Anonymous98 Most 10 psi rear and 12 to 14 psi front. Check side wall on tire. The main idea is to keep the front equal and rear equal so the mower deck will cut evenly if the deck is properly adjusted.

@WreckDiver99 10 ай бұрын

I HATE those freaking caps. LOL....I get to change out tires this year on mine. I looked at just the tire vs. tire+hub, and wow, for the extra $20 for the two I'll buy the tire+hub assembly. I may change my mind when I get these wheels, but if the wheels are junk I can swap out the tires on the old ones for sure.

@jeffatkerson1172 4 жыл бұрын

@Nhyland88 Жыл бұрын

Great Video, right to the point. Thanks! Subscription button hit!

@JohnsonsSmallEngines Жыл бұрын

I’m glad it was helpful! Thank you for the kind comment and supporting the channel. It is greatly appreciated:)

@richardweidner9568 3 жыл бұрын

Great

@derekobidowski3301 2 жыл бұрын

the best quality front wheels for these entry level John Deere D, E, and S lawn tractors is to go with the one for the John deere X300 or X350 as its a much better wheel and tire assembly which has precision bearings and a multitrac C/S turf tire

@JohnsonsSmallEngines 2 жыл бұрын

Or just install, Replacement M123811 Bearing Kit to normal roller bearings. amzn.to/3raBY9w

@robertehlers4330 Жыл бұрын

I could not get the golf cart tire on I am not as good and you have 1 arm Damm I suck 😒 you are awesome

@JohnsonsSmallEngines Жыл бұрын

You don’t suck. Ask your local golf cart dealer. The golf cart tires are very high ply and very hard to get on. You should take it to somebody that can help with that tire.

@afs2011 2 жыл бұрын

Great video. Is there a certain type of grease to buy? Thanks!

@JohnsonsSmallEngines 2 жыл бұрын

As long as your putting grease in the wheels periodically that is what matters. I use a John Deere part number TY24416 it come in a tube for my grease gun. It is a Lithium grease.

@lp8243 4 жыл бұрын

Great video. I just put tubes in both of my X300 rear tires. What do you use to grease the rear axles? I picked this mower up used and the previous owner apparently never did. Dry as a bone and nearly seized. I want to try and bring it back before it gets worse.

@JohnsonsSmallEngines 4 жыл бұрын

LP the x300 series tractors are hydrostatic driven in the rear and there is no grease points. The transmission has hydraulic oil in it that keeps everything lubricated including the rear axle. It’s all in one. If your trying to push the machine when it isn’t running? There is a hydro release lever you pull out that is located near the hitch hole in the back of the tractor. To the right of the hole.

@lp8243 4 жыл бұрын

Johnson's Small Engines thank you for the quick reply. The wheels were just really difficult to get off when I was putting tubes in the tires. They were almost rusted on. Any recommendations on how to fix that issue so that they don’t become permanently seized? Enjoy all of your videos, keep ‘em coming!

@JohnsonsSmallEngines 4 жыл бұрын

LP ooooo! Ok, gotya. Just put never seize on shafts after you clean them up before putting the tires back on axles. That will keep corrosion down.

@sue6910 3 жыл бұрын

A lot of women, me included, watch these "how to" videos because we haven't got a clue as to what we're doing. Your's is the first video that says to put grease on it, thank you! Off to buy some grease...

@vincedavis4393 3 жыл бұрын

Awesome

@JohnsonsSmallEngines 3 жыл бұрын

I’m glad it was helpful

@minuteskill 2 жыл бұрын

Thanks, nubby!

@JohnsonsSmallEngines 2 жыл бұрын

I’m glad it was helpful and thank you for commenting. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated.