HOW TO CHANGE NOZZLE & NEEDLE ON A DENSO COMMON RAIL INJECTOR

Рет қаралды 13,032

Күн бұрын

This diesel injector from a Toyota 1kd-ftv was on its short 2nd life. Don’t wreck perfectly good injectors by modifying them. If your doing r&d & wanna build a race car, then go for it.
DONT DO THIS!!!

Пікірлер: 24

@cannaroe1213 25 күн бұрын

wow i'm so greatful you made this mate, I was thinking of putting new nozzles on 5 injectors that worked fine, just... preventative.. maintainence.? and it looks so easy to do. Well i'd have buggered it, so I owe you like 300 pound. Also we say dead as a doornail in England too, no idea why haha!

@JimPropert 3 жыл бұрын

This is how you change injector nozzles...Don't! Love it!

@smilecraftdentistry7809 4 жыл бұрын

Anthony thanks for all the wonderful information 👍

@Nisar1193 Жыл бұрын

I am so glad I came across your video. I have a 1.6tdi seat leon which was rough idling. I took my 4 injectors out and got them sent to a injector testing team. On the results 1 of the 4 injectors failed on the idle test. I was told that the cheapest thing to do is get a replacement nozzle or just buy a new one. I was intending on going in the next few days to get a replacement nozzle but after watching this video I have decided to buy a new one. Thank you for sharing this video, it must help alot of people. Also one question I have is on my test results it failed on the LL test in your opinion is this injector failed, because according to them it is.

@brendandixon831 8 ай бұрын

So if there's such a problem with higher flow nozzles, why would denso make them? I get not doing a DIY job in the shed. If the nozzles are swapped they should be bench test afterwards. But what do you have against say a set of +30s going in a car? Obviously you have to remap and all that.

@cesarjorgemurillobarientos1813 4 жыл бұрын

very good my brother

@Jimmy_Saf Жыл бұрын

I’m so annoyed that I got ripped off by a mechanic who said he could change my injector nozzles. How can people do this shit.

@valdostube 3 жыл бұрын

Hey Anthony. One of my nozzles is swollen for some reason. Are you saying I should replace the entire injector?

@jagknullarsmurfen 4 жыл бұрын

Thank you. I did the mistske to follow other videos showing how to fix the injectors... the hilux wont start and now i have to get 4 new.

@Fourby4Diesel 4 жыл бұрын

Yeah bad information it should be illegal I suspect over the years some laws may change maybe maybe not

@jagknullarsmurfen 4 жыл бұрын

@@Fourby4Diesel it really should! Thank you for your videos, they are so usefull! Best regards from sweden

@sharkbaitsurfer 3 ай бұрын

Sage advice - "don't do it" OH and please find your magic wand in time for the next video and wave it frantically.

@rynhardtdohse7657 4 жыл бұрын

Hey Anthony what do you think about pre-filters for the fuel system to avoid fuel contamination?

@Fourby4Diesel 4 жыл бұрын

We really don’t see a lot of contamination and when you do, extra filters don’t stop it from getting to the Injectors, therefore evidence says it’s not really needed

@aissa169 Жыл бұрын

How does this mechanical injector work

@dennchh1823 8 ай бұрын

quick question if you want more fuel to make more power what do you do if you don’t put 30% nozzles

@Fourby4Diesel 8 ай бұрын

Buy a vehicle with a bigger engine

@giulianoleopoldo6018 4 жыл бұрын

Bouna sera Qiuck one Can I take if the original cap nut off Clean the nozzle Then reassemble.. 05 sprinter..... Or...... Graziè Giuliano

@Fourby4Diesel 3 жыл бұрын

No need leave things alone or replace with new injectors

@dealztidy 4 жыл бұрын

👍👍👍

@rogerhaugen2200 11 ай бұрын

what if you take off the nossle off clean it with carb cleaner, and put it back?

@Fourby4Diesel 10 ай бұрын

There’s nothing to clean it’s worn out, watch more videos

@AnthonyCelata 8 ай бұрын

@@Fourby4Diesel I'm still a little confused. I watched your whole video and like this person who asked you "what if you take off the nossle off clean it with carb cleaner, and put it back?" I'm wondering if you're saying its not worth opening the nozzle and throwing just those bits into a ultrasonic cleaner or maybe just some acetone to unclog the little ports, if you've got a bad spray pattern? I understand that an injector with 100k Miles on it is most likely worn out but if you're not in a position to spend the thousand or so dollars to have all new injectors, is it still not worth unclogging/cleaning them? I ask because that's my position. I know my injectors are old, don't have the money to buy new ones, but I certainly can open and clean them. I do have an ultrasonic cleaner. And I also know some of the ports/little holes whatever the hell you want to call them, I know some of them are clogged from looking under a microscope. But I can't get them clean without taking them apart. Honestly I'm more scared of stripping the cap-nut while trying to open the damn thing than anything else. Very curious to hear your opinion. Thanks for the video!

@ahamedali9443 4 ай бұрын

so this video is pretty useless? stick to what the title of the video suggests. not everybody can afford bigger and powerful engines rather build with what you have and have a little bit of kick from your vehicle. changing your vehicle should be a personal choice not another random mans business.