This video was incredibly helpful, just started switching tires and let me just say your way of doing it is way easier. Less strain on my back for sure!

Man, you have no idea how helpful this video is. Thank you so much for posting this.

Thanks for posting. This Video is very helpful.

Your video was not too bad , but a few things I would suggest, since many tiremen don't work with new tires every day! There's no advantage of spreading lube on the sidewall, but should only be on the bead itself, (mounting lube should be anti rust/corrosion type) as you will pop the first side on and have only 1/3 to bar on the other side, (always remember, lube is your friend!) and detergent SHOULD be vegetable based! Flip the bars around next time, since the spoon side is for mounting The newer tool is fine in a tire shop, But Once the beads were broken, 2 bars were faster for me! Just a few observations from a retired mobile truck tire mechanic, after 34 years of working tires of all sizes!

Excellent, I wanted to see the differences in the tire tools used. I agree the orange would be easier , excellent video

Best tire mount/dismount video on KZfaq.

Lubricate the inside of the second bead that is being installed . Without a tire cage do not inflate over 5 PSI . Always use a 6 foot remote hose inflater . Good video !

I just started doing diesel mechanics and this was so helpful thank you for making this video!! And for showing this method it was so great to watch!!!!

Thanks for the tips, I had all the tools and struggled , but your tips and method worked great!

Thanks for the video. You're a good teacher.

Dude, that dismount tool is nuts, must make everything easier. Great technique, great video.

Thanks! Changed my first tire ever. Worked pretty slick! 👍

You make it look so easy thanks

Bro that's a great safety tip to prevent blowout and fatal injury.

Very helpful video and thanks for sharing videos like this…👍🤟🤙💯

Good job man. I learned a little bit from everybody.

This is a good man. Thanks for this video.

Nice vid man you made it so easy thx

Thanks for this man. You are awesome. I’m a little guy and this helped me out so much. Again thanks for the help

you the Man ...sweet vid mr

I learn alot from your videos

You guys sure pick the easiest, loosest tires available

Great job!!!💪👍

Thanks help me alot

I just dismounted and mounted my first tire like this, in under 20 mins by just watching this video

Great video man thanks for the help

Just a side note. In reference to inflation while on the 🚚 as this method he says is "safer," as the rim cannot fly and kill u. Just so people know and are safe. The air pressure alone at 100-110psi on a zipper split (tire rupture upon inflation) has a equivalent of 12ton of force. Yes, Just the air pressure has that kind of power. It's like being hit by a truck. So even if it's bolted to the truck the dangers are JUST as high. Yes the rim can kill you, but most injuries and death are from the air pressure. Search truck tire zipper split and you will see what I'm talking about. FYI this is my day job. Hope this helps, Not trying to take anything away from this guy or his video. Just trying to help others be safe and add on to info. 🙏🙏 safety first.

Like the way you explain learn alot

Very helpful video mashallaha

Great video thank you 👍

Thanks is helpful been a while since I've done it so thanks..

Wonderful Video! Thanks !😊

Thank you so much

Very good my friend!

great video man been a while since i seen some videos from you

Great 👍 advice

Hi, can you use this demount bar with the orange handle you used in the video on regular car tires like size 195 R 15 or 205 R 16 or is it only for truck tires? Hoping to get a response soon so that I will decide wether to purchase one or not.

I'm looking to get a portable air compressor for bus tires. They're 10R22.5x7.5 and inflate to 115PSI. Mainly for emergencies or regular inflation, so probably won't use it much. Any recommendations on size and CFM?

What size bars where you using

Great video, helped me a lot changing tire for the first time, thank you and God bless you

Probably the fastest I’ve seen some one do it

Is it posible to damage tire if I hit tire higher on the wall with that hamer?

Good job

Great job man! Thanks!

Nice vid love to see you post again. Still got the mk1 rabbit?

Cool video i learn alo

i got one question, why are most american semi truck tires so narrow? when compared to european semi trucks just why???

Very nice

For semi tires like car tires does it matter which side of the tire is facing out or in? When Mounting it?

5lbs air pressure is recommended before rolling into tire cage.

A semmy?

hey boss i have stuff same as you also i just subs and following you now.

Its which country

What if they have really nice rims? How will you prevent the face of the rim from being damaged or scratches?

Can you nose that on 4x4 wheels

هل يمكن إلقاء عندك عمل معاك ؟

11:22

What's name of that fancy tool and how much does it cost

Hello Hello, brother. What's up

Sure show it with a new tire that was just mounted . Should show a old stiff tire that is stuck to the rim

Anyone else here for 4:15 trying to get that damn bottom bead 👋 not too bad for 22.5 but hard to get on the bigger 24.5's.

Bro,,Where shall I get that crowbar ???

I prefer to use bars

can you make a video on the rabbit?

This is my job. Can you employee me?

You dont even know how man lmao 🤣 ... Been doing this for years .... I would be on my 3rd call bye time you get the first bead off 🤣🤣🤣

I’ve been offered a job at Ryder doing this for 20/hr. Is it worth it lol?

Haha lol i hate using any other than a bar. Put a bran called elephant ear wax put a small amount of it in a a bottle with water i cound dismont an mount a tire in less than a min

Mm don't know 😮

You're using the sissy bar LOL

Shit. I don’t happen to have a bead axe. But I do have those vevor tools .

Bb

Ehh if the tire blows on the truck you're still gonna get severely injured if not killed.

Isn't that easy, you can pull a muscle in your back in a beat.

"Semee" 🤦🏻‍♂️ Great lesson but you're working too hard. They make a slide hammer gadget to break beads with

im faster with ken tool bars those tools are overrated

Yoyoyoyo i just finished the video wtf? Man why dddddude come on your saying you hate your back from hurting bro your using more of your back like wtf! Look i may not have a video but i can teach you by just listening what i have too say. First not going to tell you about how you dismount the tire your right everyone has there way of doing it but mounting it can be so much easier flip your bar around and use the hook you only need one bro just one not 2 bro bro uou could slip like that if you aren't careful just use the one bar it take like 10 seconds to do it and use that same bar flip it around using the hook to put it in takes about 5 seconds too do so f that hammer good buy lol

It's a dirty job.

Do not break or mount the bead with that hammer/axe thing, you will be compromising the integral structure of the tyre, it can be costly & dangerous. Also, when mounting the tyre, you’re using the wrong end of the levers.

i used to bust tires for a livin, i quit after my back started bothering me. tough job