How to Mount and Dismount a Truck Tire With Pry Bars in 10 Minutes

Рет қаралды 650,501

Күн бұрын

In this video I'll show you how to mount and dismount a truck tire by hand in 10 minutes.
First things first, be very careful when you inflate a tire truck. There is a serious possibility that the tire might explode so use as many safety measures as possible. In this video the tire is deflated before dismounting and after mounting I'll inflate it just a bit for the purpose of the video.
Step 1:
Remove the valve core. After the tire is flat I put it laying down.
Step 2: Bead Breaking (separating tire from rim)
Position the rim with valve stem on top. Take one pry bar for leverage and drive the second one between bead and lip of rim. This will loosen the bead from the rim. Flip the tire and repeat the procedure on the other side.
Step 3:
After both beads are removed from bead seat area, lubricate tire bead and bead seat area with a suitable lubricant.
Step 4:
Removing Tire from Rim
Insert pry bar under the bead at the top of the rim and pry bead over lip of rim. Keep pry bars close together. This is done to make prying easier and help prevent bead damage.
After part of bead is over rim flange, hold pry bar in place and remove the other bar to pry next portion of bead over rim. Do not pry too large a portion at once, it will be hard to pry and may tear the bead. Work your way around the rim until the outside bead of the tire is completely over the rim.
Step 5
Once the tire is removed from the rim, clean rim thoroughly
Next take the new tire lubricate it and prepare for mounting..
Step 6: Put the tire on the rim using your body weight
Step 7: Mount tire using a similar technique as shown in Step 4
Step 8: install valve core
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
From my garage I'll show you how to repair medium to heavy-duty trucks and trailers, including maintenance, air brakes, tires, driveline, steering and suspension, and overhaul and engine rebuilds.
I will also be posting videos where:
-You will see how I resolve truck and trailer related issues, steering, transmission, rear end etc.
-I'll repair components such as doors, floors and side panels.
-I perform general or routine welding.
Subscribe Now!
/ @trucktrailerrepair5910

Пікірлер: 169

@nickaxe771 4 ай бұрын

WOW never seen a tyre bead break so easy. Look at the size of that compressor tank....huge. This guy knows what he is doing....I take my hat off to you Sir.

@yvonnemartinez5639 4 жыл бұрын

Thanks for the info...helped a lot with 8 tires!! Under 30 min

@4WinterTires-uv1mr 11 ай бұрын

Awesome! 1 out of 10 vids i have clicked and this one has shown me well especially for the beginner like me

@jmanbgg 2 жыл бұрын

this is either a very large tire or a normal tire handled by a small man in his small work shop. incredible.

@swankydog 6 жыл бұрын

This guy is experienced and very good. I've only mounted 2 small truck tires myself and got a hell of a workout.

@trucktrailerrepair5910 6 жыл бұрын

Thank you very much, I appreciate it. Smaller tires are also harder for me too.

@petermuyunda7444 5 жыл бұрын

swankydog

@chamorroguam3776 5 жыл бұрын

If smaller tires are harder then you need to have a professional teach you the right way it's all in the technique there's a lady that would blow your mind search KZfaq

@Fatboy_Pancho 3 жыл бұрын

@@chamorroguam3776 lol you dont understand how easy it is to mount and dis a semi tire but a car tire completely different for one there a lot smaller yo handle 2 if you dont do it right you'll f up your rim and i did see a lady dismont a car tire hopefully its not the one wearing the tight see through pants cause if it is lol you need to stop comparing lol

@rj.8.8.u Жыл бұрын

In my library. Brilliant. Gotta learn sometime!

@nayibbukelevatochingon2438 2 жыл бұрын

GRACIAS. MAESTRO.

@tramptruck4859 3 жыл бұрын

Thanks for the video - I've found it a tremendous help, working with 435/65 22.5 tyres on 13" rims. I never knew Kris Kristofreson fitted tyres 😊

@boathemian7694 2 жыл бұрын

LOL obviously these guys are too young to recognize that name

@JonRheaume2282 Жыл бұрын

425 or 445. Not 435 right?

@tramptruck4859 Жыл бұрын

@@JonRheaume2282 yes, my typo, 425.

@user-is4xc9hh6w 2 жыл бұрын

الله ينور يا باشمهندس

@SGTBrass 3 жыл бұрын

Im admiring the fact this video shoes from air down to finish without missing a step

@louzipher4764 2 жыл бұрын

Guess again, he skipped a step.

@austingreen3893 2 жыл бұрын

@@louzipher4764 ya, you have to hit the inside beat the rest of the way on with a hammer, well thats what we do

@user-qo7sd4ei3r 5 жыл бұрын

تسلم

@jadenwaldman2252 4 жыл бұрын

Nice job

@paulmachak9853 3 жыл бұрын

This ole boy did a far better job than I could have done and he didn't hurt himself like I did.

@lukekolodziej9631 5 жыл бұрын

You sir have the magic touch well done

@ColeCleveland1 7 ай бұрын

This was like watching Muhammad Ali Box. Awesome video

@automovement.official 4 жыл бұрын

mantap 😆👍

@antoniaoliveira7115 4 жыл бұрын

Muito bem .trabalha com pneu grande e dificio.

@magnify318 3 жыл бұрын

I really like it

@youtubificationizer 3 жыл бұрын

This is a great video with great instructions. Thanks for creating quality content and educating others.

@potatopotato8360 4 жыл бұрын

Do you need to balance truck tires like you would on small car tires?

@wenjunlim 3 жыл бұрын

Hi Sir, may I ask, for a 14" car tyre, what size of a rim crow bar (inches) do you recommend?

@davewright7512 4 жыл бұрын

Made hard work of that!

@sameerasampath8964 4 жыл бұрын

Friends my channel subscribe help please 🙋🙋🙋

@sameerasampath8964 3 жыл бұрын

Good

@mohammadhira4085 5 жыл бұрын

Super

@user-rv9um6xv7s 4 жыл бұрын

شغل ممتاز

@mdtaaj9668 5 жыл бұрын

Tyre me brass se kya lagata hai

@NewLife-qj9mx 3 жыл бұрын

You skipped the one part I wanted to see - how to get the new tire started on the rim - ive been wrestling with my 15" tire for 3 hours - cant get the 1st half on the rim

@NewLife-qj9mx 3 жыл бұрын

@Bruce Lee - it matters which side of the rim you are trying to mount the tire on - i had mine backwards - flipped it over and the tire went right on, piece of cake

@Fatboy_Pancho 3 жыл бұрын

Haha probably had an old stile rim it can be confusing somtimes i know i had my many opinion about wtf going on moments haha

@JonRheaume2282 5 жыл бұрын

Got to hand it to you man. You did it with the stupidest bars I've ever seen somebody mount a wide base with in my life.

@Nunyanunya123 4 жыл бұрын

Lol!!!! Right..

@sameerasampath8964 4 жыл бұрын

Friends my channel subscribe help please 🤝🤝🙌🙌🙌

@pacorondon3680 2 жыл бұрын

@@sameerasampath8964 Tkank you

@boathemian7694 2 жыл бұрын

@@sameerasampath8964 done

@GudduKhan-pp3jp 4 жыл бұрын

How does brother puncher feel

@Micscience Жыл бұрын

I must have the world's worst tire because I have tried several ways to break the bead and it just won't break. I drove over the tire with my truck and the bead did not break. I placed a piece of wood as a ramp and drove the truck onto the ramp and the bead still did not break. I tried using tie down straps and the strap broke. These videos can be miss leading because there are some tires that it is easy to break the bead. When you have a tire and rim that has been sitting outside exposed to the elements the bead seems like it is much harder to seperate.

@zombiehuntermz6095 3 жыл бұрын

It's easier if u use water and soap wetting both sides it usually takes me 1 min to dismount one. Give or take on how stuck the tire is to the rim

@Fatboy_Pancho 3 жыл бұрын

Is more of a bitch if the rim has rust and the air slips through lol but honestly agree the bottle helps alot but super singles can be a bitch though

@Kid_of_98 5 жыл бұрын

Another good tip I found when doing my tires is to lay the tire on a bucket to make sure when the air fills the tire it will be level instead of it being lop sided

@jibblesq 5 жыл бұрын

What?

@sameerasampath8964 4 жыл бұрын

Friends my channel subscribe help please 🤝🤝🙌🙌🙌💖

@Fatboy_Pancho 3 жыл бұрын

Some time that'll work but always have a tank compressor or how my buddies pronounce it bring the booska lol it enject the tire of 130 psi too fill the tire with amount of air but only 20 to 30 psi will remain in the tire so make sure too fill in the air about 95 or 105 sometimes 110 psi

@elisnell7605 4 жыл бұрын

thats one dude I would never fight all thoes guys that do that are strong as oxes

@sameerasampath8964 4 жыл бұрын

Friends my channel subscribe help please 🤝🤝💖💖💖

@AbdulRahman-mg2in 3 жыл бұрын

Good bro main b ye kam krta hoon

@paakwesi2667 4 жыл бұрын

Nice work 💼

@MuhammadShahbaz-pp5rk 3 жыл бұрын

How to Land Cruiser tyre changing manually

@mdahmadkhan9987 6 жыл бұрын

very very good very nice bahut accha lagta aap ko kaam Dekh Ke Mujhe kaam chahiye weather NYC Chaurasi chhattis Chaurasi chhattis

@thegeekyfightermma8301 3 жыл бұрын

Does dish soap work to?

@pappukhan6668 5 жыл бұрын

Mast

@ishmaelpatel893 4 жыл бұрын

And he just did that tire lol that bead broke so nicely

@elvioleguizamon6336 4 жыл бұрын

vengan a py para mostrarles como montamos 200 cubierta en tres hs

@The-tw3qg 3 жыл бұрын

Do you think you can put a description or add what type of prybar you’re using?

@helloneighbor11 3 жыл бұрын

Search truck tire bar

@martinschaffmeir7729 6 жыл бұрын

The hardest thing I've ever done changing a 4ply 8 inch tire with vice grips and screw drivers getting it off wasn't bad but the last one I did i never did get the new tire back on

@chamorroguam3776 5 жыл бұрын

Martin Schaffmeir use some kind of dishwashing soap and pry closer together

@DynasDaily 4 жыл бұрын

Gotta stand on the tire

@sameerasampath8964 4 жыл бұрын

Friends my channel subscribe help please 🤝🤝🙌🙌🙌

@sameerasampath8964 4 жыл бұрын

@@DynasDaily friends my channel subscribe help please 🤝🤝💖💖

@tatarihazel9061 2 жыл бұрын

had the same problem lol just took them to bridgestone haha

@jesushernandez-ue2gv 4 жыл бұрын

It is well explained friend but the levers do not help you, make good levers with stabilizer bars for jeep

@low22xd Жыл бұрын

what are you doing bro??

@juandedios6833 5 жыл бұрын

Not enough lube putting tyre back on

@v8foraheart884 6 жыл бұрын

I’ve got 10 ply it was damn near impossible to do it by hand, used a machine but it chewed away at the bead area cause how tight it was getting

@roberttill3787 5 жыл бұрын

you probably attempted to do it from the wrong side of the wheel. Its possible, but really heavy going!

@sameerasampath8964 4 жыл бұрын

V8 For heart 5 subscribe you friends ...my channel subscribe help please

@SawmonandNatalie 3 жыл бұрын

What type of levers / tire prybars is being used in the video?

@helloneighbor11 3 жыл бұрын

The wrong ones

@rhubarb2657 2 жыл бұрын

Looks like bars for passenger or light truck machines

@georgetaylor8535 2 жыл бұрын

This guy makes it look easy but this shhh is still hard to do.

@rainmankb7970 3 жыл бұрын

Why no lube when mounting the tire......and i think i could of done 2 to your 1.....been a tire guy for 35 yrs....never seen anyone not use lube to mount a tire that big....lol

@antpoo 5 жыл бұрын

So do you remove tyre from outside or inside of the rim?

@ahmedrashadjamion 5 жыл бұрын

that depends on where the drop center is

@sameerasampath8964 4 жыл бұрын

Friends my channel subscribe help please 🤝🤝🙋🙋🙋

@louzipher4764 2 жыл бұрын

Wherever the tire stem is, that is the way comes off. Good luck putting big truck tires back on the rim without your 300lb. cousin Bubba.

@culmalachie 5 жыл бұрын

In true Blue Peter style: 'now this is one I prepared earlier..' LOL. But you are correct in showing the procedur - just that in m y experience - whether I did the job myself or for instruction "on the day" or taken to a tireshop..... there's an element of frothy language and flying spinning tools and , let's just not get into all that.... But as anoother comenter says - you get a good wrokout on a hot day - isn't that when most such jobs occur? - or middle of hard winter when fingers want to disppear inside warm gloves.. Cheers & thanks for showing

@Fatboy_Pancho 3 жыл бұрын

Usually in the winter time the tire where out a lot fast then summer so yea when it hits winter its a bitch lol especially handling with bars without gloves haha

@jordanjukes4883 5 жыл бұрын

That’s a 395/80R22.5(super single) I find them hard to strip and we use a sledge hammer and metal plates to break the beads

@roberttill3787 5 жыл бұрын

the only ones that are hard to strip is the ones mounted on wheels with a safety hump in the wheel.

@roberttill3787 5 жыл бұрын

i would never drive a truck tyre flat. you run the risk of breaking sidewall steel bracing cords, with the risk of the tyre later having a sidewall blowout.

@DynasDaily 4 жыл бұрын

That’s not a super single.. a super single is 455/65R22.5..

@Fatboy_Pancho 3 жыл бұрын

Yup the guy in the bottom is right lol an 80 22.5 or even a 75 22.5 are only for single semi trailers mainly for hoppers trailer or prium or petite even for single trailers the super single has only been used for semi truck so far that i worked on lol and man there a bitch to put back on somtimes especially when that plastic cover is on lol

@jesushernandez-ue2gv 4 жыл бұрын

esta bien explicado amigo pero las palancas no te ayudan,, fabrica unas buenas palancas con unas barras estabilizadoras de jeep

@louzipher4764 2 жыл бұрын

4:43- then the screen goes black and like magic, the tire is on the rim to be buttoned up. Nice magicians trick. Let's see the missing footage Houdini.

@ishmaelpatel893 4 жыл бұрын

That’s how ya do it in slow motion in real life he moves expeditiously.

@SGTBrass 3 жыл бұрын

This dude is a veteran he got his method down with years of experience he knows what makes it easier for him there's many ways of doing it fast and right , just gotta find the way that works for you best

@knightwolf8850 3 жыл бұрын

Future F1 tyre 😅

@korea-gurye 3 жыл бұрын

우와

@jmanbgg 2 жыл бұрын

yay. just 170 more minutes to go

@joecampbell106 6 жыл бұрын

Puts more lube on old tyre coming off then new one going on wtf you want

@sameerasampath8964 4 жыл бұрын

Friends my channel subscribe help please 🙌🙌🙌🤝🤝

@rajt529 5 жыл бұрын

👍

@ishmaelpatel893 4 жыл бұрын

Good vid tho tough work if ya panic ..

@eriksanchez6231 5 жыл бұрын

Esta mal ese procedimiento

@johndoe-xv5iz 6 жыл бұрын

it seems longer then 10 minutes

@jasontaylor5061 6 жыл бұрын

george Lopez all depends on if you know what your doing or not.

@pacorondon3680 2 жыл бұрын

Fast

@juancarlosruiz5399 4 жыл бұрын

En esetiempo yo m desmonto como 10

@3719lee 4 жыл бұрын

I have 20yrs of tire experience,he working against his self 1lean the tire up sledge hammer duck head,break bead used some good lube,then break 2nd bead,on the ground flip tire 1time,and 4 god sake those r the wrong tire bars my god longer tire bars while I know his back is a wreck,but from what i see he got it down just little techniq adjustment!!!

@Fatboy_Pancho 3 жыл бұрын

Haha your funny doesn't matter if you use the right one anyone that can mount and dismount a super single is all good in my book shoot i used a flat head to dismont a tire before almost lost a finger lololol

@3719lee 3 жыл бұрын

@@Fatboy_Pancho yeah yeah let's stress on your body i didn't last this long without back problems or any other issues like some guys been productive and safe is a winner in my book, longer bars give him more leverage!!!

@Fatboy_Pancho 3 жыл бұрын

Super singles are a bitch to dismont honestly even a bigger problem when you put a new tire on lol

@mdarfin9843 2 жыл бұрын

ami kaj korbo bngla theka bolchi ami ata pari

@boomi1314 2 жыл бұрын

பூமிநாதன் பஞ்சர்கடை பாலமேடு நன்றி ஐயா

@ishmaelpatel893 4 жыл бұрын

I did mine with harbor freight screw divers in ten minutes

@jamesebola1250 3 жыл бұрын

That bead was not strong. Tires on lawn mower are harder to replace.

@t0ny1992 6 жыл бұрын

were can i buy a double seal air cap????

@putheflamesou 5 жыл бұрын

and the irons

@JonRheaume2282 5 жыл бұрын

Mohawk rubber. Myers tire supply. Ken-tool.

@gtdreamer7181 5 жыл бұрын

Its all in the beard...

@antonikalinowski7725 3 жыл бұрын

czy sądzisz ze wszyscy co to oglądają to sami idjoci i uwierzą ze ta opona tak lekko zeszła ????? ja klinami z drewna czasami i ze 4 szt muszę użyć

@ahmetyldz4385 5 жыл бұрын

Lastikci bu ama biraz ağir

@user-fd9wc4gn8j 5 жыл бұрын

انا كومجي

@thgiartslkat3714 2 жыл бұрын

Ted Kaczynski proves TO ALL OF YOU correction and rehabilitation is attainable to all who seek it.

@gsmsimo3723 4 жыл бұрын

مستعد نمونطيها بعيني مسدودة والله

@aliturkmen3412 5 жыл бұрын

dayı balyoz kulansana daha rahat olur

@ahmetyldz4385 5 жыл бұрын

Kullamiştir

@tampabaybuccaneersfan7904 4 жыл бұрын

That tire should be inflated inside steel safety cage, if that Rim fails, you're dead meat.

@syamsulali6100 4 жыл бұрын

agreed man...!safety first

@rainmankb7970 3 жыл бұрын

That tire would fail way before that rim.....

@user-on9oj4xr2x 4 жыл бұрын

بكم سعر بنشر

@alexday8514 10 ай бұрын

FITTING THE TYRE IS 300 TIMES EASIER THAN HE MAKES IT LOOK IF U USE LUBE

@Vermapk55 3 жыл бұрын

That is not as easy as you did Means you had done something before caption

@tickyul Жыл бұрын

He is a huge man with meaty, ham-sized hands and a lot of experience....I wonder if this would work for a twinkie-based Hipster like me!?!?!??!

@bobburger4803 11 ай бұрын

Probably not. Keep your hands with the Twinkies and dicks

@royarmenta1765 4 жыл бұрын

You could dismount this tire in less than 5 minutes with the appropriate bars bro.

@rumonkhan7406 4 жыл бұрын

🤔

@2QOOL808 6 жыл бұрын

that new tire bead did NOT sound very lubricated. You using those short tire spoons are just adding more work to yourself IMHO. I felt bad for you during the whole video....LOL

@lesglover6515 5 жыл бұрын

GAZOO where is your tire installation video homie?

@satveerjat9637 5 жыл бұрын

GAZOO super

@chamorroguam3776 5 жыл бұрын

You can tell this guy took more than 10 minutes cause he had to cut out every time he ran into a problem try using the right tools it should take less than 10 to do that job the rim was clean and that's a soft tire

@cheichkmbour2184 3 жыл бұрын

@wrenchwerkz745 4 жыл бұрын

I was impressed till he started inflating the tire with no cage around it. ALWAYS use a cage. If you don't, then just KZfaq tire explosions

@StrongLikeBullTV 4 жыл бұрын

Do you transport your cage when you are stuck on the side of the road?

@wrenchwerkz745 4 жыл бұрын

@@StrongLikeBullTV no I don't, but that's not the point. This is not your normal 6 or 8 ply car/light duty truck or SUV in the video. No one is going to be on the side of the road in their Prius doing this.

@StrongLikeBullTV 4 жыл бұрын

Wrench Werkz I have done it many times. I am not paying for a service truck. BTW I drive a Chevy Kodiak with 11 22.5s

@wrenchwerkz745 4 жыл бұрын

@@StrongLikeBullTV good for you 👍

@Fatboy_Pancho 3 жыл бұрын

@@wrenchwerkz745 do you know the difference of a single or a super single old stile to the new stile rim if you do explain in your own words what he was doing wrong and if he was dealing with an old stile or new stile rim witch is it also was it a super single tire he was monting and dis or was it a single hmmm i wounder what answer youll pick wrong lmaooooo

@user-kn1vi9dl9c 5 жыл бұрын

I am the owner of a workshop to repair tires The person appearing in the video does not have the least skill at work and can evaluate it by 50%

@col9898 2 жыл бұрын

I do this within 3 minutes 🙄

@maidenaholic 4 жыл бұрын

My record for a truck tyre removed and replaced with new tyre is 1.58. yes, 1 minute 58 seconds.. quickest way to do it, leave the wheel on the truck but have it couple inches off the ground, less pressure with yourself when getting it off as all the pressure is on the truck wheel and not against you. This video took too long, I want my view back 😂😂.. but at least he done a good job and the trye won't blow up or come off..