How to Chase Walls | Electrician's Tips & Tricks

Рет қаралды 18,235

Күн бұрын

Learn how to chase out a wall for installing electrical sockets. As a professional electrician, Sam frequently installs and moves sockets and wiring, and knowing how to chase out walls is a fundamental skill that every sparky has to master.
All the tools that Sam uses in this video are listed below. If you have any questions about this video, please leave a comment below, we'd love to hear from you 🙌
- - - - - - - - - - - - - - - - - - - - - - - - - - -
🛒 Purchase the tools from here:
Spacer Connector
👉 spacerconnect.com/spacer-connect/
Firecore SDS Plus Chisel 165mm x 75mm Angled Bent Tile Chisel.
👉 amzn.to/43AnCzG
Socket Box Cutting Template Tool.
👉 amzn.to/45PxUO0
Makita HR003GD201 40V Max Li-ion XGT Brushless SDS-Plus Rotary Hammer
👉 amzn.to/3NaWf9I
Makita 196845-3 125Mm Dust Collecting Guard
👉 amzn.to/4607BFd
Makita 198440-5 Dust Collecting Wheel Cover 230 (Newer version)
👉 amzn.to/42lja6B
👇 Try Amazon Prime FREE for 30 Days for Fast & FREE Delivery 👇
www.amazon.co.uk/tryprimefree...
As an Amazon Associate, we earn from qualifying purchases.
- - - - - - - - - - - - - - - - - - - - - - - - - - -
▶️ Chapters
00:00 Introduction
00:16 Required Tools and Materials
03:21 Getting Started
03:56 Backbox Spacers
06:03 Angle Grinder and Dust Extractor Fitment
07:52 Confirming the Chase Position and Cutout Size
09:08 The Chasing Begins (Grinder)
10:01 SDS Chase Knockout
11:33 Fittings in Place (Pre Filling)
11:44 Fittings and Accessories (Post Filling)
12:10 Behind the Scenes and Bloopers
- - - - - - - - - - - - - - - - - - - - - - - - - - -
Please LIKE & SUBSCRIBE to see more videos like this. We welcome your comments and feedback, so if you have any suggestions for subjects you'd like us to cover, please get in touch.
Thank you for watching.
Website: www.championsofthetrade.com
TikTok: / championsofthetrade
Twitter: / champions_trade
Facebook: / championsofthetrade
Instagram: / championsofthetrade
LinkedIn: / champions-of-the-trade
#electrician #trades #tipsandtricks

Пікірлер: 27

@stertheder Жыл бұрын

Coming from the US, the thought of imbedding a device box in a concrete wall would not have occurred to me but you have shown an elegant way of doing so! Bravo

@ChampionsOfTheTrade Жыл бұрын

Thank you for the kind comment. I assume you're used to timber frames and dry line boxes?

@jayjohal6892 7 ай бұрын

How wide should chasing be for 2 twin & earth cables adjacent to each other??

@ChampionsOfTheTrade 7 ай бұрын

Sorry I missed this question, but I think I answered it below 👍How did the tv wall install go?

@jayjohal6892 7 ай бұрын

@@ChampionsOfTheTrade I think i might have drilled thru the chimney flue but i'm not sure! Was doing the 1st fix today

@dogbreath6974 10 ай бұрын

There are tungsten drill bits with square cutters you could get for doing this job, not sure how good they were, I think you drilled a hole with the core drill then used the square cutter on hammer only to finish the corners, doing this twice for double sockets. This would only be good for new work, not chaising in cables. That grinder attachment is really good, doing this without one would be very messy, having to stop to wait for the dust to settle. Good video.

@ChampionsOfTheTrade 10 ай бұрын

Thanks Dogbreath. The box cutters you're talking about are only any good on thermalite block. They won't do concrete, I used to have one but never really used it, just extra weight in the van so got rid of it.

@jayjohal6892 7 ай бұрын

How did you fix the trunking to the wall??

@ChampionsOfTheTrade 7 ай бұрын

I held it in place with a nail each side, only need enough to hold it in place until the plaster dries.

@jayjohal6892 7 ай бұрын

@@ChampionsOfTheTrade How wide in mm should i make my wall chase?? i have two sockets cables going up the wall??

@ChampionsOfTheTrade 7 ай бұрын

@@jayjohal6892 depends upon the size of the oval trunking you're using / capping. I tend to mark the width and then cut to the outside of the line, this allows a little wriggle room. Let me know how you get on.... Ps I hope you're using a qualified sparky for the wiring part? 😉

@jayjohal6892 7 ай бұрын

@@ChampionsOfTheTrade i've seen sparks use the banding to fix the oval to the wall??

@ChampionsOfTheTrade 7 ай бұрын

@@jayjohal6892 you don't actually need to use anything, you could just clip the cable to the wall and plaster over it, but in my view, it's not good practice. I use oval trunking because it protects the cable from the plaster, and should the cable ever need replacement, it makes it a lot easier in the future. Metal also rusts, so in years to come, using band straps could blend through. Those sparkies could also be being over zelus with the fire regs.

@jayjohal6892 7 ай бұрын

Where is the oval trunking from??

@ChampionsOfTheTrade 7 ай бұрын

If you're in the UK, Screwfix sell it amongst other electrical wholesalers

@jayjohal6892 7 ай бұрын

@@ChampionsOfTheTrade Can you put coax cable in the same chase as mains t&e??

@ChampionsOfTheTrade 7 ай бұрын

@@jayjohal6892 no, it should be at least 50mm away. I would use 16mm oval for that, whereas 20mm for the twin and earth ring cabling. You're obviously mounting your TV on the wall then? 😉

@jayjohal6892 7 ай бұрын

@@ChampionsOfTheTrade yh thats correct! and a data point! Does the data cable have to be separate as well?? 3 separate chases?? Please say no! 🙏🏽🙏🏽🙏🏽

@ChampionsOfTheTrade 7 ай бұрын

@@jayjohal6892 no! Lol The data cable is fine to run with the coax, but try and use a screened cable if possible, just in case of any interference.