🔬 How to clean eypieces and objectives

No video

🔬 How to clean eypieces and objectives | Amateur Microscopy

Рет қаралды 47,261

Күн бұрын

For eypieces use a cotton Q-Tip, for objectives lens cleaning tissue paper. Do not apply pressure. Do not use cleaning solvents for eyeglasses. Consult your manual on the preferred cleaning solution. Only clean when necessary. Blow away dust first.
🎈 SUPPORT
Become a Patron: / microbehunter
🔬 MICROSCOPE RECOMMENDATION
I receive many questions on which microscope one should buy. I recommend the following models for amateur microscopy (Affiliate Links to Amazon):
Children’s/Introductory - Swift or National Optical SS110: amzn.to/2WdS4PX
For Amateurs - Swift SW380T (with phototube) or Swift SW380B: amzn.to/3fu7aIY
👜 AMAZON AFFILIATE SHOP
US/World: www.amazon.com...
Canada: www.amazon.ca/...
Germany/Europe: www.amazon.de/...
UK/Europe: www.amazon.co....
🎬 KZfaq CHANNELS
Microbehunter: / microbehunter
Microscopic Mysteries - Guess the specimen: / @microscopicmysteries
Microbe Talk - Ask a microbiologist! / @allthingsmicrobes
💻 OTHER LINKS
Main Website - Tons of microscopy info: www.microbehunt...
MicroWorldArchive - www.microworlda...
Forum - Connect to other microscopists: www.microscopy-...
Instagram - Cool pictures I made: / microbehunter
Facebook - Here I post videos: / microbehunter
✔ Check these Hashtags! #microbehunter #science #microscope

Пікірлер: 38

@Scottmp123 4 жыл бұрын

You need a video showing how you made that “air blower”. Nice work.

@RMarinka 4 жыл бұрын

There is a video now kzfaq.info/get/bejne/npd_m6Vjp6m9eKM.html

@Mr.wither_storm 2 ай бұрын

Someone spilled a bunch of spice somehow on top of my microscope. It got inside the middle where the eye pieces look in. What a mess. Smh I came to see how to remove the round screw pieces that hold in the glass pieces from the optics. There’s two indented marks so I’m guessing there’s an actual tool for these?

@lessmigrantsmorewalls8392 Жыл бұрын

2:30 you are genius sir

@paryjameel868 2 жыл бұрын

Your videos are so helpful thank you from heart

@handle8handle2handle2 2 жыл бұрын

im having problems with my 40x objective, because im finding that i have to move it really close to the actuall slide and cover slip with the sample, it has lots of dirt, potential scratches and recently gott water in it because the cover slip broke from the objective being so close, is there any way to get detailed focus on a 40x objective without going to close to the slide or cover slip?

@sanskritiscreations9373 10 ай бұрын

Ideally you should focus the slide FIRST at 10x and then just move ONLY the objective to 40x or higher (whichever you need) without changing the plane of focus. That's coz the objective lenses are aligned in a way that focus plane for all remains the same so the user has to only focus at one and it will remain focused on all objectives. But if you find that after focusing at 10x and shifting it to 40x, the focusing changes, and you have to use the adjustment knobs to refocus at 40x, then it is possible that you may need to get your stage/lenses realigned (ask the company for service/repair, they'll know). One must never attempt to focus at 40x or 100x objectives coz the distance between the slide and the lens is so small that we run the risk of touching the lens to the slide and the lens can get scratched and you may also end up with a broken slide and cover slip. Hope this helps!

@PredatorGaming-2007 3 жыл бұрын

Please make a video about cleaning 100x after using oil immersion

@johnsonjohnson2979 3 жыл бұрын

In the USA, at least in California, we can not buy ethanol over the counter except as vodka (40%etoh). So our rubbing alcohol is not ethanol with dye added in the US. What we have access to is isopropyl alcohol sold in various dilutions (diluted in dH2O). Iso alc comes in 50%, 70%, and 91% dilutions. Sometimes it contains a dye, but very rarely. Isopropyl alcohol at any dilution is known as rubbing alcohol (in the US) wether it contains dye or not. Is isopropyl at any of those dilutions, but with out dye okay to use in place of ethanol?

@EliasDaoud 4 жыл бұрын

cotton Q-Tip leave lot of small particles of cottons. I tried it before, many times. Where I can find the Ether ? Pharmacy

@Mr.wither_storm 2 ай бұрын

Yes! They look almost like flattened little worms. Use the blower after cleaning. Don’t re use the q tip. I wipe then turn it to the other side for the next wipe or if you’re using the tip, throw out after one wipe.

@Achromatic_Studios Ай бұрын

Pro Tip: wash your face thoroughly before you use microscope eyepieces, this will reduce dirt deposits on your lenses. Humans, as well as all mammals in general, are quite greasy creatures.

@nachiket30sep 3 жыл бұрын

Thanks for the very informative video. Could you give some advice for cleaning polarization filter and the analyzer?

@Remascard 5 жыл бұрын

Can you do a video on applying oil on top of a brightfield condenser so you have total oil immersion? (Condenser - oil - slide - oil - objective) Thanks.

@tomstur119 7 ай бұрын

I want that pump air blower! can't seem to find this on Amazon

@faustsmith 2 жыл бұрын

Could you post a video cleaning flux fumes off both zoom objectives of the szm series of microscopes used in the electronics repair industry please?

@PlayJewel 4 жыл бұрын

How did u made that amazing air blower?

@MicrobehunterMicroscopy 4 жыл бұрын

Here are two videos where I show you how to make it: kzfaq.info/get/bejne/npd_m6Vjp6m9eKM.html kzfaq.info/get/bejne/h7SDlLGqqq7Ho40.html

@worldofmicroscopy6896 4 жыл бұрын

I like your videos. ✌👍

@dumitruvalentincrihan2527 6 ай бұрын

Hi, Isopropil alcohol is safe to use?

@usernamemykel 3 жыл бұрын

Others say not to use cotton sabs, but to use only polyester swabs - your thoughts?

@gettingpast4391 3 жыл бұрын

nice work

@kjellgolsen8521 3 жыл бұрын

You mention 70% etanol and 30 % of ? (Ither?) can you spell it for me and do you have the chemical formular ?

@neilbarroga2455 3 жыл бұрын

Ether

@heisenberg6921 7 ай бұрын

I will say the "danger" of using this or that solvent dependes on the brand of your microscope, Olympus, Leica or Zeiss, for example do not use the same "glue" to fix lens on their objectives

@biggibbs4678 2 жыл бұрын

When you finish you can drink the ether as a celebration

@neilbarroga2455 3 жыл бұрын

It is possible tonuse xylene to clean the objectives of microscope.

@MicrobehunterMicroscopy 3 жыл бұрын

Be careful with solvents like these. xylene might be able to dissolve the lens glue that is/was sometimes used to hold the lenses in place. Generally alcohol is recommended. Xylene is also not healthy to be inhaled, so I would use alcohol (consult the manual, if it mentions this)