How To Clean Fliters And Service The Dyson V6 / DC59 Cordless Vacuum Cleaner

No video

How To Clean Fliters And Service The Dyson V6 / DC59 Cordless Vacuum Cleaner

Рет қаралды 51,901

Күн бұрын

In This Video, I Show How To Clean Filters And Service The Dyson V6 / DC59 Cordless Vacuum Cleaner
Most problems can be solved by simply replacing the filter!
FIlter Available here geni.us/RC36 (paid link) As an Amazon Associate, I earn from qualifying purchases (paid link) As an Amazon Associate, I earn from qualifying purchases
Torx Screwdrivers geni.us/EFna (paid link) As an Amazon Associate, I earn from qualifying purchases (paid link) As an Amazon Associate, I earn from qualifying purchases
Battery geni.us/pAYjHBn (paid link) As an Amazon Associate, I earn from qualifying purchases (paid link) As an Amazon Associate, I earn from qualifying purchases
Dyson v 11 Animal geni.us/Leun (paid link) As an Amazon Associate, I earn from qualifying purchases (paid link) As an Amazon Associate, I earn from qualifying purchases
Please Subscribe and leave me a comment!

Пікірлер: 156

@lyndagore1029 2 жыл бұрын

Hello Sir, I have the V6 Animal Dyson and the brush head stopped working last year and I put it away in the cupboard. I watched your blog showing how to clean, take apart and cure problems and I thought "I can't do that" so the Dyson went back into the cupboard.....Well today, I watched you again and I took the Dyson apart, cleaned and CURED the problem. So to anyone who thinks they can't do it, watch this man and you can't go wrong. Thank you for being so informative. I am so grateful to you.

@kathrynosborn3987 Жыл бұрын

Thanks I went and got a new battery thinking that was the problem. Wish I watched this first.

@caroldriskill6800 2 жыл бұрын

Best video on how to keep your Dyson vacuum running smoothly!!! Thanks for making the video!

@gogreenBridget Жыл бұрын

This was so helpful. I just did all of this and now my Max power works again. Thank you so much.

@mld9684 2 жыл бұрын

Thank you for sharing your expertise on how to clean 'my' Dyson.

@MemoriesRR Ай бұрын

You have helped me immensely. Thoroughly serviced our’s today. Thank you. 🇺🇸Ohio.

@user-nd2ip1oq2z 7 ай бұрын

I was watching as I was taking it apart. There was a very important detail that should have been pointed from the start... Do Not Wet any part other than the filter!! I did and fingers crossed when it's completely dry, there will be no problem, hopefully.

@colinmorgan8641 Жыл бұрын

Thanks! Have a 10 year old DC59 and the battery was on its last legs. Thought about replacing it but found a replacement battery and your video. Now it's as good as new!!! You should have seen the s..t that came out of it when I took it apart!!!!!!!

@paulgomez5104 3 жыл бұрын

EXCELLENT! This is the best Dyson V6 maintenance video I have seen yet!

@paulamashiter4255 Жыл бұрын

Thankyou so much , you have made everything so clear , I didn’t know I could pull this apart , many thanks again , Paula

@fogfrank1957 Жыл бұрын

GREAT!! I pick these up on trash days, clean and service them and usually give them away. I have kept 2 for myself a V7Animal and DSC59. Shame the charge doesn't last longer.

@judywallace Ай бұрын

brilliant video, thank you for sharing how to clean the V6

@waynemcfc9291 Жыл бұрын

Cheers stampy I have a 2yesr old Dyson , that now works like new thanks to your video. Proper helpful!!

@taieshacrawford2837 3 жыл бұрын

Just purchased one from a pawnshop and this is the most informative video I have found that’s far.

@richardmclintock1729 Жыл бұрын

R McLintock First class video, it has helped a lot

@whenden 3 жыл бұрын

Thank you so much,this is the best service instructions,I couldn’t have accomplished this task without it.

@williamkosh3672 2 жыл бұрын

I echo the above. Great podcast

@jeanenepetrone5804 Жыл бұрын

I was given a free Dyson, but the motor turned on and off. I cleaned it out like you did and it works great! Thank you for your help!!

@kathleentruax8731 2 жыл бұрын

AWESOME video with step by step instructions on how to remove all the parts on your Dyson V6 machine and get all the powdered dirt, hair, and all around gunk removed from every nook and cranny to make it run just like new. I actually looked at the roller and really didn't see anything wrapped around it. Thus, I wasn't going to complete the last step Stampy showed on this video. However, when I turned that gray button to the left with a washer and removed the flat part above the roller, I found lots of fuzz, dirt and leaves that were hidden between the roller and the wand. With your help, Stampy, I was able to refurbish my Dyson V6 to like new condition. THANKS SO MUCH!!

@elainefirth8277 4 жыл бұрын

just given my v6 the clean of its life. I never did anything but rinse the filter before, I nearly died when I saw the amount of stuff that was still left in there. great video. thankyou. have shared, liked and subscribed. now I am going to buy the extra's that I need.

@Total-Solutions Жыл бұрын

I found one on the street, so I decided to take it apart and then found your video I went further and I got the motor out including its little rubber housing which you just pull out and then immerse the whole motor in water no harm whatsoever. I put it in the ultrasonic cleaner and then sprayed it with brake cleaner. It’s fine and went back together and it’s good. My reason is that the bearings are dust sealed also water sealed. I went further and took the cyclone apart a little bit more than you did by removing all the screws. It then went in a bucket of warm soapy water. It’s all plastic and there’s no electrical contacts to damage. Even the contacts on electrical contacts were just wires going from A to B, no damage.

@marycooper2348 2 жыл бұрын

Down to earth you can understand him cheers

@IWantMyCountryBack2 2 жыл бұрын

Excellent presentation. Thank you.

@B33MAD 3 жыл бұрын

Great stuff thanks for the video tutorial. The only part I couldn't do was separating the cyclone head from the motor section. Pushed the two white tabs together but wouldn't unhinge from the back, so I left it and cleaned the unit all in one.

@cathiemarvellous Жыл бұрын

I was able to get mine off. It wasn't easy but then torc screws were rusted on. Disappointing as I could see so much dust inside! 😕

@lorihoard2265 Жыл бұрын

Best video for taking apart and cleaning my Dyson. Thorough and easy to follow. Thanks so much!!

@sap268 3 жыл бұрын

Very clear and to the point. Thanks

@suzannefaulkenberg3936 6 ай бұрын

This was the most helpful video. Thank you!

@lesleymorrison2203 Жыл бұрын

Thanks for you clear, precise explanations about cleaning the DC 59. The description of disassembling the cyclone was great. I know mine is extremely dusty and dirty but did not know how to disassemble this part to clean properly. I have bought a new filter,so will now disassemble and clean before installing new filter and brush in bottom.😊

@JacquelineGuyan Жыл бұрын

Great, easy to follow tutorial, just wish I had watched before rinsing the filter under water, thank you.

@abigaildavid123 Жыл бұрын

Super! Thank you so much. Will be doing this immediately. Your video on how to repair the brush bar that won't spin saved me from having to buy a new Dyson. So glad to see these for a V6. Mine was great until 2 days ago and it's about to be rejuvenated. Subscribed, liked, and bookmarked. Thanks again for this tutorial.

@eurotoura Жыл бұрын

Just brilliant thanks. Fantastic step by step advice👍👍

@barbaralawrence4177 3 жыл бұрын

Thank you. Great video with clear instructions. Will be cleaning it regularly from now on. Stampy the Star!!

@stampysrandomreviews 3 жыл бұрын

Thanks! be sure to do this also kzfaq.info/get/bejne/hct7ds96psrQoqs.html

@annlancaster3847 2 жыл бұрын

Thank you it’s helped a lot as I didn’t have a manual.

@baburejaz 9 ай бұрын

Excellent educational video with attention to details Thanks

@suebenjamins278 4 жыл бұрын

Really good clear explanation. THIS is why my DC59 had got very smelly ! - I was cleaning the pull out filter in the way Dyson tells you but I could tell it was not very efficient. Now I can give it a thorough overhaul, simply and easily. Thank you Stampy!

@raystone8113 2 жыл бұрын

Great description of this piece of kit

@lawrenceforsley356 4 жыл бұрын

Fantastic video! Especially conformation of the size 8 Torx screws and the need to not get anything wet because of later circuit damage through oxidation,

@adelaidegal21 Жыл бұрын

Fantastic video! Thank you for creating and sharing 👌🏼 Honest, straightforward and practical display of how to clean a Dyson Stick Vac. I didn’t realise how first mine was until I started the clean 😳Cheers Mate! 👏🏼

@nataliejones9329 3 жыл бұрын

I just followed your video and want to thank you for making it. It helped me completely and saved me from buying another. I really appreciate the time you took to make it.

@stampysrandomreviews 3 жыл бұрын

Thanks Natalie!!!

@klr2863 10 ай бұрын

Thank you! great video just saved me a packet on new vac!

@lindabiles8277 3 жыл бұрын

Just cleaned my dyson cordless using your video and now it is working really well. Such an easy video to follow. Thank so much

@stampysrandomreviews 3 жыл бұрын

Brilliant Linda! Glad I could help

@barbwilliams1238 4 жыл бұрын

Thanks for helping this non-engineer cope with the dyson! I will be watching again in 3 months at its next service date ;)

@stampysrandomreviews 3 жыл бұрын

Thanks

@alanwebb1842 Жыл бұрын

Brill guide did mine to the letter and it’s fab!

@bobnesbitt9821 9 ай бұрын

Excellent video, very clear explanations !

@WarringHostMakinSatanToast 4 жыл бұрын

Thanks a ton, Stampy! I was on the verge of getting a new DC59, but figured I'd check out KZfaq before giving up. Ours was cutting off/on...I'd clean the filter and withing a day's use it starting surging off/on again. I did buy a set of 6 filters yesterday, so I'll be golden once I get it all cleaned up. Seriously, thanks a lot.

@DaleShipsIt 3 жыл бұрын

Thank you! This video saved me from buying a new (pre)filter. When I do get around to buying a new one, I'll use your link.

@stampysrandomreviews 3 жыл бұрын

Thanks Dale appreciated

@AWatts 3 жыл бұрын

Someone was giving theirs away saying it was a battery issue and died real fast. I tried to run it and see if there was an issue. It would go off and on. I took out the filter and did what you showed and a massive clump of hair and junk came out of the bottom of it. I washed it with dish soap (Because it wasn't smelling that great, now it smells like pumpkin spice dish soap! LOL) and now it's outside to dry. I tried to run it again and it didn't do the off and on. I figure if it runs smoothly after that I can just order more filters instead of a battery. Off to clean the brushes and maybe shove a cloth through the tube with a broom stick and see if I can get this at its cleanest. Thank you for the information!

@Keith80027 4 жыл бұрын

Great how to video, I took my apart and found it full of dust and dry wall dust along with pet hair. I took my further apart than you shown to get at the dry wall dust out that stuck to sides of everything inside. Definitely saved my $$$. I have order a new battery too.

@davekevin3735 2 жыл бұрын

Thank you so much for taking the time to teach us You just reinvented my 6 year old Dyson V6 😘

@gillianwilson9662 2 жыл бұрын

Thanks for the tips, was ready to buy a new foot pedal but hoover working perfectly now 😊

@abigaildavid123 10 ай бұрын

Both your Dyson tutorials were easy to understand and the Dyson V6 worked great after following your instructions! Now my trigger to make it go won't work. Have you ever gotten inside to fix that problem? I'd appreciate your help so much! Thank you.

@barbaralange8946 2 жыл бұрын

Really great video. Particularly liked the emphasis on not getting the parts wet as another video I viewed washed some of the parts. Many thanks for a very professional presentation.

@chrissyakers 2 жыл бұрын

Thanks a lot! Can’t wait to turn my tuned up Dyson on in a few minutes! A hair clip (which we Americans call a Bobby clip) was blocking the bar from freely rolling. Some compressed air & WD40 in all the right places, along w/ a fresh filter, & I know she’s gonna’ be ready just like new! 💖

@RichardBronosky 3 жыл бұрын

You just saved me from having to replace my Dyson. I already had a new V11 in my Amazon cart. Instead I ordered a RoboRock S6 MaxV AI robot. Woot!

@stevesibanez Жыл бұрын

I just got a free dyson, the same one you have here, because the head doesnt spin. It will only turn 1/4 way around each time i pull the trigger. Hopefully doing these steps will make it work properly. Thanks!

@slrcouture 2 жыл бұрын

Can you share a link to purchase the charger? I purchased this from a thrift store for $20. I vacuumed the stores carpet and it worked great. I just need the charger. I’m going to give it a good detailed cleaning following your steps. This is the best video I’ve come across. Thank you

@Bellab2302 3 жыл бұрын

good video mate, very clear. your comedy at the end really is 'champagne'. keep up the good work

@Phaedrax2 3 жыл бұрын

Just received my replacement battery from Dyson & the instructions that came with it are far from clear. Hopefully I will be able to replace it successfully after watching your video. The cleaning tips are really useful too - thanks a lot. :)

@stampysrandomreviews 3 жыл бұрын

I hope so too!

@avrilleslie5528 3 жыл бұрын

Thank you so much for your video. You have just saved us from buying a new Dyson.

@stampysrandomreviews 3 жыл бұрын

Brilliant!

@lilamacguinness1232 4 жыл бұрын

Great video helped me to take mine apart for a good clean thank you lots of great tips. 😀👌👌

@Stoney2525 3 жыл бұрын

Thank you for the Help man!

@stampysrandomreviews 3 жыл бұрын

No problem

@ginovairo6487 3 жыл бұрын

Great video. I think the best one I’ve come across for servicing a V6. Full of relevant tips. I haven’t seen anyone else say to use a plastic coin to disassemble the head, but that makes so much sense to avoid damaging the fitting which I’ve done when using a knife or screwdriver! One thing I’ve now done is buy a HEPA filter head and upgraded my original V6. It was quite cheap and came with a new motor-so I have a spare motor as well!

@slrcouture 2 жыл бұрын

Where did you purchase your hepa filter head? Thanks in advance

@ginovairo6487 2 жыл бұрын

@@slrcouture found an original Dyson replacement on eBay through a UK seller. But there are also unbranded Chinese versions available.

@slrcouture 2 жыл бұрын

@@ginovairo6487 ok. Thanks

@kathrynlamb1810 3 жыл бұрын

Thanks for the detailed information, please can you show how to clean the 2 filters at the end with the motor in as part of the overall cleaning. I've seen someone else who did it, but they recommend washing the bits n bobs in water. Thanks again for your advice about that.

@Davefender100 4 жыл бұрын

Thanks never new you could open the filter, it was clogged, better not washing it, got new ones from Amazon cheers

@keithbrown7809 3 жыл бұрын

Great video saves replacing your unit 👍

@suebuck6832 3 жыл бұрын

Watched your video followed everything you did V6 now working fab thankyou

@stampysrandomreviews 3 жыл бұрын

Happy to help!

@absta100 Жыл бұрын

Amazing thank you so much really bloody useful sorted my fluffy 🎉 Dyson with death 😂 indeed. Cleaned the head amazing had a load of hair near the end fixture obviously I clean it off in situ but removing the head is brill. Vacuum cleaner for life anyway when you maintain it

@Tricky250 Жыл бұрын

Thanks, nicely done :)

@heidihigh5547 3 жыл бұрын

Good video easy to follow instructions

@stampysrandomreviews 3 жыл бұрын

Thanks Heidi!

@denisedonlan9872 3 ай бұрын

Fantastic, thanks very much

@sir_squonks_alot_castro4438 Жыл бұрын

Really appreciate this video mate

@RADCOMJ1 10 ай бұрын

Excellent video. you tried very hard to say dust instead of shite when cleaning the head😂😂

@vickyesc2797 3 жыл бұрын

This was super helpful, so clear and easy to follow. The only thing I couldn’t do is the little screws as I don’t have the tools, but I managed to get a pipe cleaner in the little crevices. Someone gave me their dyson as they said it was “broken”. Now to see if it runs better once the filter is dried out! 🤞

@stampysrandomreviews 3 жыл бұрын

Good luck!

@RedHorseRivera 11 ай бұрын

Thank you so much for sharing.

@gusfoster9315 2 жыл бұрын

Very through and great video. How about repair of broken wires on power head? Very fiddly trying to reassemble so I gave up!

@venm4418 3 жыл бұрын

Great help! Thank you!

@ivythomas5415 3 жыл бұрын

Thank you for the detailed demonstration. Just perfect. Ivy

@stampysrandomreviews 3 жыл бұрын

Thank you so much!

@lynboughton2705 Жыл бұрын

great instructions.

@michaelellner966 10 ай бұрын

Thank you helped me 😊a 😊 lot great video

@jimmyross4352 Жыл бұрын

Very helpful, thanks!

@robertshatto2995 4 жыл бұрын

Thst was great,,thank you for showing and explaning,,

@stampysrandomreviews 4 жыл бұрын

Robert Shatto Thanks for watching

@lindabiles8277 3 жыл бұрын

Well demonstrated video can’t wait to have a go servicing my own machine.

@stampysrandomreviews 3 жыл бұрын

Thanks a lot!

@anitaknight9528 3 жыл бұрын

Thank you so much! We were able to clean each part! Awesome tutorial!

@Shakes_The_Clone Жыл бұрын

Any leads on replacing the thin gaskets inside the cyclone assembly? I broke mine down as far as it will go to super deep clean pet odor, and I’m thinking I should just replace the gaskets if possible. Dyson call center had no idea what I was talking about and said they don’t sell gaskets. 🙄 Also, thanks for your great content!

@paulkrisman 3 жыл бұрын

Great video Stampy!

@stampysrandomreviews 3 жыл бұрын

Thanks Paul

@TracieAlmond 5 ай бұрын

Thanks. I have a V11 but many of your tips seem to be applicable to my model. Mine pulses, except on max power. I did find a vent that was blocked with silt, but it still pulses despite being thoroughly cleaned. I replaced the air filter. The only thing I haven’t done yet is open the cyclone part - I will when I get a Torx screwdriver. Any other tips for a pulsing machine?

@jmichalakjr Жыл бұрын

You know your Dyson, thanks

@kayla25285 3 жыл бұрын

Great video thanks loads you've helped no end, mines like a new machine. Your a star

@stampysrandomreviews 3 жыл бұрын

No problem 👍

@douglasfields3942 2 жыл бұрын

Very helpful.

@simoncantwell2572 3 жыл бұрын

Thanks for this mate, Has fixed my V6 so i can buy a robot Vacum instead of replacing it :D

@stampysrandomreviews 3 жыл бұрын

excellent news

@keithbookman3976 Жыл бұрын

Excellent!

@mikestone7593 Жыл бұрын

Thanks great video. Brill

@lynhenley1859 4 жыл бұрын

Hi my Dyson 6 animal has a motor in the head the brush comes out but not the motor can you advise please. Your description of how to clean was great thank you.

@joeduffy9764 6 ай бұрын

Good video

@simonwadd4038 3 жыл бұрын

Top stuff, thanks. I'd found vids in past to take head end to bits, but this is most I've managed to get into cyclone end - much cleaner, fingers crossed when filter dries it'll go again (as resistance to beater bar turning feels like issue.) SHall try to buy new filter with your link now :)

@P-tricky13 3 жыл бұрын

Thanks for the info. Do you have to clean/replace the back filter?

@bryanbryant9962 2 жыл бұрын

Probably not. I opened mine for the first time after years of use, and it was pristine. Let me emphasize, mine does not have the purple twist-off kind. I'm talking about foam inside the exhaust vents at the back of the motor housing. The piece that contains this is easy to remove if you want to check. However, I did make a small mark in the plastic when I used a screwdriver to pry it off.