Dyson Animal Brush Bar Won't Spin-Help Repair And Fix

Рет қаралды 331,966

3 жыл бұрын

New Head geni.us/kYPZ4s (Amazon) (Check contacts are clean first)
As an Amazon Associate, I earn from qualifying purchases
this video, I show you what to do if your Dyson Animal Vacuum cleaner brush bar won't spin properly. We look at all the electrical connections and some parts that can be removed that nobody else talks about on youtube.
Please hit subscribe for me...
Be sure to stay tuned to the end for a real fix.
Purchase a new Dyson Animal here. geni.us/zQys (paid link) As an Amazon Associate, I earn from qualifying purchases (paid link) As an Amazon Associate, I earn from qualifying purchases
Dyson v6 Complete Head geni.us/kYPZ4s (paid link) As an Amazon Associate, I earn from qualifying purchases (paid link) As an Amazon Associate, I earn from qualifying purchases
Dyson Brush Bar geni.us/rBOF2 (paid link) As an Amazon Associate, I earn from qualifying purchases (paid link) As an Amazon Associate, I earn from qualifying purchases
T8 Torx screwdriver geni.us/Zoa9PEk (paid link) As an Amazon Associate, I earn from qualifying purchases (paid link) As an Amazon Associate, I earn from qualifying purchases
Dyson V6 Filters geni.us/YwHIMi (paid link) As an Amazon Associate, I earn from qualifying purchases (paid link) As an Amazon Associate, I earn from qualifying purchases
Dyson V6 Full-service Video • How To Clean Fliters A... (paid link) As an Amazon Associate, I earn from qualifying purchases

Пікірлер: 553

@stampysrandomreviews Ай бұрын

New Head geni.us/kYPZ4s (Amazon) (Check contacts are clean first) As an Amazon Associate, I earn from qualifying purchases

@BrumBrumBryn 3 ай бұрын

I had pulled the entire head apart, found the part with the issue, couldn't get it to move freely no matter how much WD40 I soaked it in. Couldn't find a replacement head in stock. Almost gave up and nearly bought a new vaccum. Then I find this video. "There is a T8 torx in here", 'no way that works' I say. BOOM. All comes apart with some pulling, miles of my long thick hair in there. Put it back together, runs good as new. Thank you so much! Only video on KZfaq that helped.

@peastong Жыл бұрын

The electrical contacts in the main section were our cause of frustration! Amazing guidance, thank you, saved us from taking it to a repair shop, had no idea re the contacts and the wire going round the dust collection bin.

@raysrocketry2196 6 ай бұрын

Yes, it's working again! Realized it was an electrical issue and you identified it. The fix? Lightly emery-boarding the contacts on the body. Thanks for the tip! This Dyson's been through a lot. Ironically, it stopped working right after I washed the HEPA filter, so some people think the cleaning led to the breakdown - an evil strange coincidence!

@salmashah6482 3 жыл бұрын

Thank you so much! You saved me from throwing out my V6 and having to buy a new vacuum. The vacuum repair shop told me the electrical problem couldn’t be fixed. I brought it back home, watched this video, dismantled the black thing behind the brush on the motor head, cleaned the plug of hair and used a can of compressed air on all the electrical contacts. It works just like new!!! Excellent video!

@stampysrandomreviews 3 жыл бұрын

Excellent news Salma good for you!

@alancordwell9759 2 жыл бұрын

Spot On - fixed my brush not spinning; the problem was that the two female contacts had built up a coating of solidified dirt inside them so that the pins in the extension tube or beater head went in, but did not make electrical contact. It was pretty tough to shift as well, but now it works perfectly. Thank you!

@caronproctor8764 2 жыл бұрын

So happy, doing a happy dance. I went out and bought a T8 screwdriver and boom. The mechanism that rotates the brush was loaded with hair. Now it's all good again. Loved your accent and easy to follow instructions. Love from a Yorkshire girl living in New Zealand! Keep up the great work.

@Gentleman8astard 6 ай бұрын

I've torn my old V3 apart a dozen times to fix what others would have thrown away. In fact, I bout mine used for cheap because it "wasn't working." I couldn't figure this most recent failure out and you saved me! Thank you, sir!

@aidanmcmackin9724 Жыл бұрын

After many failed at tempts to get the brush head to spin properly you are the only "expert" that explained the hidden screw holding bar drive. 5mins later having removed all the hidden hair the dyson is working perfectly. Thank you sir.

@stampysrandomreviews Жыл бұрын

You are welcome

@leephillips3924 3 ай бұрын

I just solved the same issue with this method so I'd just like to give my thanks also 👍

@shrkim 10 ай бұрын

Thank you!! Cleaned the brush part over and over again w no luck and like you suggested it was the dirty connector at the top! Works great now (almost made it to the trash had it not been for your video!!)

@lindseygriffin2383 Жыл бұрын

It worked!!! The black spindle behind the brush bar was the culprit - all cleaned and sorted, working brilliantly again. Buying a set of £7.99 torx screwdrivers is infinitely preferable to £57.99 for a new head! Thank you so much! Good job!

@LeeArchive Жыл бұрын

Wow, the cylinder contacts were full of fluff and it worked perfectly fine afterwards. Thanks fella, you saved me a lot of money

@sammycsmith 2 жыл бұрын

DUDE. You just saved me hundreds of dollars. I was literally shopping for a new vacuum and bummed that our dyson had crapped out after 5 years. I’ve even taken it apart and cleaned it a dozens times over the years. But I’ve never done the piece behind the brush. The thing works like it did when it was brand new. So grateful for this video

@lh6211 5 ай бұрын

Oh my goodness thank you!! After doing everything possible I resigned myself to having to replace the hoover head until I got to your last tip at the very end and realised the dust had been blocking the electrical connectors underneath the hoover bin! Thank you so much!

@PaulSimmonsArt 2 жыл бұрын

This was the best tutorial I have found and I have been able to do a complete service on the machine As you said, it is now like having a new machine. In my case as well, it was hair wound around behind the black driving bush pin - I was quite shocked how much was in there chugging it up but I also cleaned up the contacts and it all works really well - thank you very much. I’m more than a little surprised none of this is on the troubleshooting sections or FAQs of the Dyson website - hmmm…..

@Glistencamping2014 2 жыл бұрын

The tip at 10mins was the absolute winner for us. Thank you

@abigaildavid123 9 ай бұрын

Back again for a full service - top and bottom. This time the trigger got stuck in the "on" position. I found a video to take the battery off and get inside where the trigger is. Found some little broken pieces and once they fell out, everything seems good to go. I wish you'd made a video on how to take of the battery and get into that chamber. I trust how you take care of the machine. I don't know if the little bits were broken before I took the battery out or if I broke it in the process. Hope you're still watching your channel. I bookmarked this video and your other on cleaning the cyclones on a V6. Really enjoy your tutorials and I watch and pause and just follow along. Soooooo helpful! THANK YOU AGAIN!

@jarranrapsey6440 3 жыл бұрын

Really helpful - thank you. I had cleaned the head, cleaned the contacts, but for me the key was the torx head screw inside the spindle. I couldn't see any hair externally but when I removed the spindle, there was an incredible amount hair wrapped underneath that was preventing the spindle from working correctly. Once this was removed everything started working correctly.

@lianneversluis9753 2 жыл бұрын

You totally nailed it!! Have been having issues with mine, and was about to turn it into a javelin, but you saved its life, and my sanity. Thank you.

@SharonPriya31 Жыл бұрын

Thank you so much! My motor head was spinning intermittently so I checked all the electrical connections in sections and concluded that the fault was with the spinning mechanism. Just like you mentioned, there was a lot of hair wound up behind the black spinner. I couldn’t believe how much was in there! I used some tweezers to get them all out and tested it and voila! Good as new!

@paterson5984 11 ай бұрын

Great video no messing around. Cleaned the contacts on the rim of dust collection chamber and blew out loads of dust in the main head below motor. All working again. Many thanks for very clear explanation

@sarahkemp1312 2 жыл бұрын

After searching through 6+ videos I found yours! I couldn’t get the black swivel part out even after pulling the entire little motor out. So I cleaned as best as I could. I then went and pulled apart to top motor like in the end of your video. Cleaned all touch points for electricity and it’s working a charm and do much power and it’s not even on boost! Thank you!!!! Will be checking out your service of this machine tomorrow!!

@janicegigg878 3 жыл бұрын

Thank you for showing how the clips need to be pushed in at the same time to separate the hand held section. That's what I needed to get the brush working! Some other great tips!

@benny4legs Жыл бұрын

Genius. Had tried the dismantle and clean with no success but the contacts on the removable dust bucket... so simple and so unnoticed. Genius. Many thanks.

@Zoey877 2 жыл бұрын

Really helped me, usually have no confidence in things like this. Took a while and a lot of patience to get that inside screw out as it was so tightly wound with hair but I did it, so thank you very much for your help.

@robinpfahning843 3 жыл бұрын

You are my savior. I’ve disassembled every part of this machine to get it working and the black screw thing was the final bit that got it going. THANK YOU!

@stampysrandomreviews 3 жыл бұрын

Excellent Robin!

@kyriakiganter8053 Жыл бұрын

Thank you so much. You are absolutely right in everything you say in this video. I'm hoping I will get the brush to work after I've done everything you say. On the surface, the electrical contact points are all clear. One thing I still need to do. Had it for 5 years, V6

@courtneyhudson2332 3 жыл бұрын

Fantastic tutorial. I’ve been looking at a couple as we’ve been having issues with both our Dyson vacuum and I’m sure I’ve fixed the issue with both now

@robsan9017 6 ай бұрын

Thank you so much for this tutorial! I just purchased an aftermarket replacement power roller brush on Amazon yesterday because of this issue, but something told me to check out videos on KZfaq on how to troubleshoot the OEM roller brush not spinning, and I found you! Long story short, I followed your guidance, and VIOLA! My roller brush works perfectly. My issue wasn't an electrical connection; it was a hair clog around the black stem I removed as per your instructions, but yeah, it works perfect now. 👍👍 Needless to say I will be returning the aftermarket roller brush.

@kevincurrie6325 2 жыл бұрын

Outstanding tip to find and clean the canister contact points. I did everything that all the other KZfaqrs suggested and it still did not work. Stampy's secret fix saved me a lot of money (and Dyson's reputation with me). And Stampy - Yes - every time I touch it (pick it up, empty, change heads) it goes off and scares the **** out of me.I think that, like a gun, it needs a safety! Thanks for your help.

@shaunlupton556 3 жыл бұрын

That tip with the connectors is priceless. Brush bar would stop spinning intermittently, cleaned up all the connectors and problem solved! Thanks mate 👍🏻

@stampysrandomreviews 3 жыл бұрын

Excellent news Shaun!

@MrSprogginz 3 жыл бұрын

Thank you so much Sir! Removing the spindle using a T8 Torx screwdriver and cleaning all the crap behind it did it for me. May God keep your workshop warm and toasty during the Winter months.

@stampysrandomreviews 3 жыл бұрын

Glad it helped

@thebannedunited 2 жыл бұрын

Same here! Nice one for the video, thanks very much. 👍

@michael-paulschallmo6304 2 жыл бұрын

You, sir, are a gentleman and a scholar. Cleaning the contacts at the top (of my Dyson SV09) got the brush bar spinning again. Cheers.

@kristypitchford6529 Жыл бұрын

OMGNESS, I've tried EVERYTHING to include calling Dyson AN HOUR AGO Who said that they no longer troubleshoot that vacuum but would give me 20% off of a new one lol. BUT It is your video that got mine working again. Thank you so much!!! I knew I was just missing something and it was those dang connections up at the top that had never been cleaned. Again thank you you totally rock!!! ❤

@mathewoakman5564 2 жыл бұрын

Dude! I’ve matched millions of videos and yours is the only one that’s shows the dust at the top part of the unit!! Awesome!!

@abigaildavid123 Жыл бұрын

After cleaning the brush bar, it still wouldn't spin smoothly - just sputtered. Tried your short cut connecting the handle end to the brush end without the pole. IT WORKED! So I just cleaned the connections for the pole and the whole thing is great. New ones are running between $500 - $650 today. Bless you! Subscribed, liked, bookmarked and will do the same with your detailing the V6 video. THANK YOU!

@thevoiceoflizkennedy Жыл бұрын

Hello mate, I just fixed my Dyson thanks to your tip about cleaning the connecting heads - I used canned air and cleaned it up quite nicely, including the roller. I took the damn thing apart cleaned, sprayed, and put it back together and it's working like a charm. Thank you from Atlanta, Georgia.

@CraftyGirlAnna 2 жыл бұрын

Oh my goodness! Had to check in from way over here in Austin texas. I have an old version that has a completely different brush roll and thought to myself well, this isn't going to work. Sure enough, I followed with you to the end and after cleaning the tube and the brush roll and all the things other videos recommended I got to the contacts you pointed out gave him a wipe down and all the sudden it's working! Thank you so much!!!

@andrewwardrobe925 6 күн бұрын

Brilliant video, fixed my dyson today after following your suggestions. It was the contacts next to the two white clips in the video but it's now had the full overhaul and works perfectly

@lorihoard2265 17 күн бұрын

Best video I've found on this subject!! I've referred back to it several times over the past 3 years. This last issue was the piece that spins the brush. Thank you so much!

@El-hefe_ 2 жыл бұрын

Fab job mate - after cleaning the metal prongs from dust etc mine still wasn't working but you showing me how to take the entire filter off so i could get directly to the metal prongs on the handle solved it for me. Appreciate the help!

@tanyat2363 2 жыл бұрын

THANK YOU! The carpet brush wasn't spinning at all, and after cleaning all the hair out of it and the contacts I still couldn't get it to work. It was the part that you unscrewed that had a TON of hair stuck around it. Saved me from having to buy a new vacuum!

@raquellduthie4760 3 жыл бұрын

Amazing! Thanks so much. Had my Dyson for 6 years and thought it was time for the bin, did everything you said and it’s like brand new, just delighted 😁

@stampysrandomreviews 3 жыл бұрын

That's great Raquell

@Lagk67 Жыл бұрын

Really appreciate it! Was able to get the brush rolling within minutes because of your awesome tutorial. Thanks again! Cheers

@johnraisbeck2800 3 жыл бұрын

You are the Man! Sure enough the contacts at the top of the canister were covered in fluff blocking the connection! Yes every time I pick the vacuum up it starts! What a PITA! Great work!

@alidavemason4417 Жыл бұрын

Great information on here. Thanks. My brush head was only doing a 3/4 turn before stopping. Have previously taken the head fully apart, cleaned it out & reassembled but would still only spin 3/4 turn. Only after watching this was I made aware of the screw to remove the helix drive part. Found lots of compacted hair inside. Removed it & Eureka, A fully turning brush head. I also took the handle apart to remove & clean the filters which sit next to the pcb on the main motor part. Thanks for doing this video.

@graydoncoleman5921 3 жыл бұрын

Wish i had known this a few weeks ago, , ended up binning mine as I thought it was broken. Nice to see you back mate, missed watching the mower man vids. Help me out loads on a few occasions

@stampysrandomreviews 3 жыл бұрын

Thanks Graydon i'll try get back on it soon

@user-pw1cn3ne4x Жыл бұрын

Thanks Stampy I now have a spinning brush bar again without any dismantling as the fault was dust accumulation on the contacts between the waste bin and the main body of the machine which I was completely unaware of. Keep up the good work!

@stampysrandomreviews Жыл бұрын

Awesome

@caitrionamartin9123 3 жыл бұрын

Brush head wasn't spinning. This was the missing info I needed, removed the black bit that holds the spinning brush (we used a flathead screwdriver even though a star shaped one was needed, but it worked) and it had loads of hair wrapped around it. Now works better than it has for ages! Thank you so much!

@stampysrandomreviews 3 жыл бұрын

Awesome!

@sabrinasilvernale504 Жыл бұрын

Saved me the cost of new vacuum. Watched dozen other videos but yours saved the day. After several hours of fiddling with the damn thing your tip had it running like new in 5 minutes. Thanks much.

@azizacar1745 3 жыл бұрын

Taking that T8 screw out from inside that spinning shaft (5:48) and cleaning behind the shaft fixed my vac. There was so much hair in there that I was sure it was entwined around a rubber grommet which turned out to be just a lot of very tightly twisted hair. Thank you againn for sharing and making the world a better place :)

@sarahsykes1757 2 жыл бұрын

Many thanks for this video! I borrowed a T8 from my neighbour and followed your instructions - brush now turning and contacts clean! Vac back in working order! Saved my buying a new head for £55!

@victoriasharp4701 2 жыл бұрын

Super helpful, this little trick...it was on the money!! Vacuum fixed and working perfectly again. Appreciate you putting this information out there, so very useful!

@Lenbop 3 жыл бұрын

Thank you...after taking the brushes apart and cleaning as usual, still didn’t work. You nailed it....it was the contacts at the top. 👏

@tiffanydavis2779 2 жыл бұрын

Did you end up figuring out how to clean your head

@laneyegalloway3909 3 жыл бұрын

Thank You! I’ve been so frustrated about the brush not moving! It was the connection. I appreciate your willingness to help.

@stampysrandomreviews 3 жыл бұрын

Excellent news! happy hoovering!

@markstapleton1318 3 жыл бұрын

Quality advice! The black screw spindle was the key. Thanks once again for the video.

@10tallsunflowers 2 жыл бұрын

Brilliant tutorial! Having gone thru a few other tutorials with no result, this one sorted the problem, which was thick dust clogging up the black driving brush pin. Thankyou.

@daphnecole2003 Жыл бұрын

Thank you so much🙏🏻 I’ve just followed your instructions and got my Dyson brush brush head working , just off to view the full service video 😊

@pamelamurray6418 2 жыл бұрын

Thank you so much. Your killer tip really worked! Removing the spinning mechanism with a t8 Torx screwdriving revealed a lot of hair stopping it from moving freely. This was not visible or accessible without removing the part. Now working like a dream.

@stampysrandomreviews 2 жыл бұрын

awesome

@lindasolorzano2885 2 жыл бұрын

Thank you so much!!! I did watch other KZfaq videos and your video helped me understand the electrical connections! Just when I was about to give up with your help I got my Dyson V7 beater head to rotate ! Made my life simpler!

@kathrynsomers5233 3 жыл бұрын

It worked!!! I got the T8 screwdriver and it spins like brand new again! Thank you!

@stampysrandomreviews 3 жыл бұрын

Fantastic! glad I helped! hopefully you subscribed!

@cathyprice8728 2 жыл бұрын

Thanks a million, as expected after watching your video it was clogged up with hair- it now works like new! appreciated you making the video

@jfb61 Жыл бұрын

Brilliant mate. Sorted non spinning brush in 10 minutes. It was indeed dust on the contacts at the motor end. Video was a godsend. Thanks again.

@margaretholland9767 3 жыл бұрын

Thank you so much This has saved us having to buy a new vacuum. I dread to think how many Dysons have been dumped because of this problem. My husband followed this video and had it working again in less than 10 minutes.

@stampysrandomreviews 3 жыл бұрын

That's great Margaret!

@corastainton94 Жыл бұрын

You legend of a man!!!! Thanks so much, fixed the issue on our V6. Used a mini straw brush to brush out that connector at the back of the dirt bucket as you showed us. Might treat it to a new brush bar now! Happy New Year!

@michaelmurdock6560 Жыл бұрын

Thanks, that did the trick. On the bright side, after trying all the other “fixes”, my vacuum is thoroughly cleaned and tuned up.

@sharwood872 3 жыл бұрын

I had already tried everything else and was just about to purchase a new motorised Dyson head, but took the "black twiddly thing" off cleaned it and it now works !!!... Thank you so much

@stampysrandomreviews 3 жыл бұрын

Excellent

@anniegibbs8789 Жыл бұрын

Thank you!!! You saved my day. It was the unscrewing the knob that moves the roller that worked for me. So much hair stuck in there! Thank you!

@suekham3928 2 жыл бұрын

Brilliant! I'm over the moon that after following your instructions, the bar runs smoothly ... after removing clumps of hair behind that black bar that spins the roller.

@briancole8826 3 жыл бұрын

Brilliant! I used the torx driver to dismantle the drive shaft and cleaned it out. Works perfectly now.Thanks, saved me buying a new motor head!

@stampysrandomreviews 3 жыл бұрын

Excellent!

@janlewis8615 Жыл бұрын

You're video showed me a whole bunch of places to clean, that, 1, I didn't know how to access, and 2, didn't know needed to be cleaned. Thank you, it was a big help. Now, to attempt a few on my own.

@MJ-rq4gl 3 жыл бұрын

Amazing. Was about to bin our dyson however after watching this it's all fixed. Brilliant work, thank you

@stampysrandomreviews 3 жыл бұрын

Awesome glad to have helped

@kevinfowler8024 2 жыл бұрын

Video much appreciated - electrical contacts in main head were causing the problem - brush now rotating again - many thanks 👍

@Idowonder 5 ай бұрын

Thanks so much! Tried all the usual fixes, but as two different heads weren't rotating I knew it had to be electrical rather than a hair clog. Exactly as you said, it was a bit of fluff up behind the bin that was stubborn enough to stay there even after blowing it all over. Pulled it out and all working again.😊

@michellehewett2147 2 жыл бұрын

Great stuff. It is working a treat with the removal of the Spindle. It was stuck due to a build up of dust and muck. Thanks

@jeffreyhorner9637 2 жыл бұрын

THANKs for the vid! My issue was down in the brush mechanism..had to dig out some hair from round the part that spins the brush. Works like a champ again!

@rach5378 2 жыл бұрын

Fantastic. Brush was stop start spinning. I’d cleaned everything you can think of to clean except the electrical contacts. I didn’t even know it had them in the brush or hose. Thanks so much it’s a million times better than even before this problem.

@magedaj 3 жыл бұрын

Thank you so much, my issue was with a Dyson ball, and this video got me close to the problem I was facing which I resolved , removing the spinning wheel and cleaning all the cought up hair and then removing the side cover, there is a little belt that had come off its bearing, placed it back on the track and there we go, a spinning brush again, thanks alot and God bless you

@stampysrandomreviews 3 жыл бұрын

Glad it helped

@jigpig6184 2 жыл бұрын

Yes! Waded through so many videos before I got to yours - the only one that fully deals with the problem. If not for this I prob would have had to buy a whole new vac.. thank you!

@slavicajankuloska6320 2 жыл бұрын

Thank you, I followed your easy instructions, it spins beautifully now. It was the connection at the motor head. I’m an expert now, thanks to you, best wishes to you

@GS-oh8xo Жыл бұрын

Perfect! If you're in NZ or Oz, I got a torx screwdriver set with the needed T8 attachment from Bunnings for $10. A little fiddly to unscrew but it worked. Nice cheap fix.

@shyamkrishnan8890 3 жыл бұрын

Thank you! After following all the directions, it works like brand new. You saved us a boat load of money. Thanks again!

@stampysrandomreviews 3 жыл бұрын

Cool glad to help

@aammdj Жыл бұрын

I have the V8 Animal which has a slightly different construction than yours. The head was stopping whenever it encountered any sort of resistance. I would unplug the tube and it would spin again...only to stop again shortly. I watched this and figured out how to remove my canister (a slightly different attachment process than yours) and there must have been some fuzz stuck in the electrical connection points because, after reassembly, she works great once again! Thanks for the tips!

@screwnuttstoo Жыл бұрын

You are definitely the man. Thank you for a great video to enable an easy and successful repair

@rengalafuze8700 2 жыл бұрын

Greetings from New York City. Thank you! I have an older Dyson stick V6 and my brush actually has a motor underneath or inside the roller head. When you remove the roller, there is another long piece that I assume holds that motor for the roller. I did all the cleaning and nothing. Then you mentioned to take off the canister that holds the dirt and pointed to the contacts by the handle. I blew some canned air into there and also wiped down the ridiculously small contacts on the back of the canister and it did the trick! Thanks again.

@user-co5vy4uy8h Жыл бұрын

❤a huge Thankyou. Sorted out our head by your tip of removing the rotator. It was completely bunged up.

@vwcw1 2 жыл бұрын

Hi, thanks for the Torx T8 tip to getting the black spiral off. On getting under the black spiral I found my Dyson head was clogged solid with fine hair , so much it was causing the machine to draw too much current and stop. Now cleaned and lubed it runs sweet.

@cir1cir 2 жыл бұрын

Wow, you just saved me from buying a new Dyson! My Animal is 7 years old and I just thought I wore out the brush. I watched your video and just cleaned out the contacts with a toothpick and it worked like new. Thanks for the tip and I'm subscribing.

@14Sugar 2 жыл бұрын

Thank you! Per your video, I cleaned the connection on the canister and on the main body. Voila, the brush now moves again! Brilliant. There was not much fuzzy dirt on the connection, but apparently it was enough to stop the electrical connection.

@nataschafrancis243 2 жыл бұрын

Thank you so much. It was definitely the back contact for me too. I have recently been regrouting so I had a lot of dust and hair wedged covering the contact. I also knew it wasn’t the brush head itself as my mini turbine head was also not spinning.

@michaelbrailsford6714 2 жыл бұрын

Had problem for months and couldn’t fix it by cleaning head. Thanks for this video which explained it could be the electrical connectors. Cleaned these on the main unit behind the bin and now works! Thanks

@douglasphillips9305 3 жыл бұрын

This was so helpful! Thanks for saving me the cost and inconvenience of having to buy a whole new vacuum head for this. And Stampy has a cool accent!

@stampysrandomreviews 3 жыл бұрын

Thanks Douglas

@flislander8784 Жыл бұрын

Bravo. I changed the battery and it did not work. Cleaned the connections as you recommended. Works now. Thanks

@afostermay Жыл бұрын

Praise be! Thank you! My issues was pet hair blocking the electrical connects of the dust bin. I always do the double click to clean out the bin but don’t get up in the crevice! Thanks!!!!!

@paulmccormick9134 5 ай бұрын

Absolutely amazing. Cleaned all contacts and works a treat. Saved us a fortune!

@peterjohnstone5753 Жыл бұрын

What a great set of tips. Taking the bit off with the torx t8 driver is what sorted mine out. excellent - thank you

@stampysrandomreviews Жыл бұрын

Excellent

@suzyreade2653 2 жыл бұрын

Thank you so much, I followed your advice to the letter and now all working. Thank goodness I don’t need to buy a new one so close the Christmas!!

@karenavery7885 Жыл бұрын

This was a great help. I’d tried everything else and removed what bits I could see to clean etc but I didn’t know about the connections!! It worked, I also realised the black rubber bit around the cylinder was meant to have bristles! 🤣🤣. Prefer a new brush head. Thanks 🙏

@nicholastheodorakos6783 3 жыл бұрын

The tip to clean the connectors near the motor did the trick to make the rollers spin again. I am subscribing to your channel - my first one after 10+ years on KZfaq. But fair is fair and you delivered. Thank you!

@stampysrandomreviews 3 жыл бұрын

Awesome, thank you!

@padraicodomhnall2760 2 жыл бұрын

Absolutely brilliant! Clear and easy to follow instructions, no faffing about or jargon to confuse the viewer. Worked a treat. I was thinking I would have to replace, so saved me a small fortune. Many thanks!