What I used in this video: SAVE ON ADAM’S POLISHES WITH THE CODE “AVVBLANC" More detailing videos: kzfaq.info/get/bejne/irxorMudyb-2oWQ.html All Purpose Cleaner: adamspolishes.com/products/adam-s-all-purpose-cleaner Soap: adamspolishes.com/products/car-shampoo Brushes: adamspolishes.com/products/adam-s-brush-kit Undercarriage Dressing: adamspolishes.com/products/adam-s-invisible-undercarriage-spray Tire Armor: adamspolishes.com/products/adam-s-tire-armor-best-long-lasting-tire-coating Steel-it paint: steel-it.com/products/polyurethane-aerosol/

Only those who love their trucks feel this level of detail. 🤙🏾

You're undercarriage is cleaner than most people's paint😂

It is so refreshing a young person have such pride and self respect to go the extra mile on their daily ride! Good for you! Keep the bar high and continue being an example. 👻

The fact that this young man keeps his truck this clean makes a very strong positive statement about his character. This video has inspired me to step-up my automotive detailing game. Great content!!

I’m all for this but that truck was not dirty😂

In the rust belt we use fluid film, messy but keeps everything rust free. Wash the frame, spray it ALL OVER, inside frame rails and everything, and leave it.

My truck was dirtier than that on the dealership lot! Well done though. Your hard work has paid off.

My.2nd gen is immaculate due to regular upkeep. Like the feeling of getting out of the dental chair getting teeth cleaned . Thanks for sharing the passion.

Love it. I finally found someone as OCD as me about the undercarriage. :) Nice work, and thanks for the info.

Great overview! I’ll definitely be doing this in the early spring.

Putting in the time and money to make sure your truck looks good and performs good is the difference and it shows. Your trucks definitely are well taken cared of good video bro 🤙🏽

Found someone just like me only my vehicles are a Sprinter van and Subaru STi. Lots of advantages in getting underneath and cleaning, can see early evidence of leaks, wires/hoses rubbing or not supported properly, and obviously keeping clean is best for corrosion prevention. There is a lot of engineering under our vehicles and most of it is well done. It’s very satisfying to keep it clean if you have time.

I tried this method right after you posted it but since I'm in Wisconsin I just thawed out today.. nice work

I think fluid film accomplishes the same thing, just start from when truck is new. It does tend to attract dust, but it’s only cosmetic the protection is always there.

I’ve been looking forward to this video for awhile. Thanks for making it 👍🏻

Love it dude! I’ve got a 99 5.9 and I’m doing my best to make it better than mint! It’s had a rough ride but I know I can get it there!

after cleaning id recommend if you have a box frame using 3m cavity wax and spraying that inside the boxed areas and anywhere theres an over lap then use that or fluid film but before all of that id use por 15 on any rust starting after you wire brush the loose stuff off then use like a rustoleum paint to paint it all then after thats done as routine maintenance id use the cavity wax and fluid film i have a tacoma and the frame looks new i also have a 73 f250 highboy and the underneath looks new on that and i live in pa in the salty road area of the united states that truck was a frame up restoration tho it did have sone rust but i didnt own it from new its rust free now

Great video. I thought I was OCD with my truck but you are on a different level haha. I’m definitely gonna use your method on the underside of my 4th gen.

Gonna do this to my prerunner....side by side car and tow rig lol....why not just do everything! Loved it bro!

This is honestly the best tutorial to clean your undercarriage, You have to care for your vehicle to do this, I already do that to our truck,not to mention that is the cleaning 3rd gen Dodge I've seen! Love the channel man!

Top notch attention to detail! You're not over the top at all. Solid work brother!

I’m the same way with all my vehicles and bike (OCD), but it’s been 2 years since I did my Durango last. It’s that time again. I always used to clean it to the point it looked like new again purple power/paint where need be/dressing, which IS a phenomenal feeling given that it’s an ‘03! Thanks for the tips, I didn’t even think about finishing with WD-40...! I actually rebuilt the heads on my ‘11 Ram Hemi and cleaned them with WD-40, wire and nylon brushes, and even wet sanded with the stuff. It’s very multi purpose substance for sure!

If your crazy brother you stepped into a funny house, cause that was a awesome video!! Its refreshing to see and know there is someone out there who takes care of his truck like his own child. Excellent video brother!!

U do NOT have OCD. I totally agree with u! My used camry rusted everywhere u cleaned. Truck/car no difference. Nice to see how mitculous u are! Thanks!.

An older gentleman who taught me how to work on cars told me if you want to stop or prevent rust, get a spray bottle of Automatic Transmission Fluid. It will last about 2 years per application. Just spray whatever metal you want to prevent rust on, let it sit for about 2 hours, then wipe it off. Works wonders

Looking forward to spring to give some of these techniques a go!

Love the detail. Love the plethora of forks in the back ground too! 🚵🏼

Good Stuff, Great Help, Good Tips 👍Thanks!

Dude you would go mental If you lived in Ontario. Keeping it soaked with oil spray (corrosion free, krown, rust check or fluid film) is our only hope lol

I just got my new truck and it’s been awhile since I had a truck I plan on keeping till I die. So looks like it’s back to spending time doing this. I used to do similar just not as deep but thanks for some new info so stuff I was miss. Now not only is this good to protect the truck but you really start to get to know your truck it becomes a friend in a way. But another big thing about this is can find all the broken or damaged things also you can catch things before it can do damage in some cases. Say a nut fell off on part of the suspension while your mudding and the bolt Get covered up then one day the bolt falls out the. There goes a leaf or a coil then crash there goes your truck. But if you were this detailed about it you will notice the nut most likely before it falls off so you tighten it up and it’s all good. You really know your truck this way you know when somethings not right. Plus your more in tune with it. You become one with your truck. Now I see you are using all adam products. Now do you use them because they sponsor your vids or do you truly like it more then anything else. I can see you love you truck, as the same as I love mine. When it comes to products like car care wash stuff or really anything you will only put what you feel is the best for it and going to protect it the most and cost is not a factor for the most part. If your favorite quick detail is was 100 dollars a bottle but in the end you really saw it’s was the best and you saw the value in it you would spend it with out thinking twice. So why adams? Did you always use in the past before you even started KZfaq? How many other brands and type have you tried before them ? Also are You trying new types of products from time to time to see if something newer and better came out? Or is their stuff good and they send it free so you use it? There’s a ton of different products on the market and there’s a hand full of really good ones and I feel there’s at least 2-3 different brands that could be used instead of one another and the same results what be achieved. What do you think about that?

You should drop the rear tire too, lots of grim and dust gets hung up there and the mechanical components can get seized up.

That dirty is me moving my truck from the barn to the blacktop. I do appreciate your attention to detail though.

Detailing done properly. Thank you for putting in the work to make this video.

I think that you are now my spirit animal... wow! Looks amazing. Great job!

This is awesome I need to spend some time and clean the underside of my vehicle and take care of the rust its a 05 but I'm the 3rd owner

Great vid! I’m trying to teach my boys this. I finish it up with a fresh coat of Amsoil Heavy Duty Metal Protectant. Just did it this weekend. 👍🏻

Love it dude!! Got a 99 5.9 Cummins and I’m doing my best to make it better than mint!

I was looking for a truck for years. Ended up looking at fords because they’re cheap, after watching your videos i decided to suck it up and get my dream truck, drove off the lot with an 07 2500 dirty diesel. 🤘

Finally someone more insane than I am hahaha...love it nice work

Did this yesterday, and I'm out driving in the rain today. Great

I have a 360 wheel brush that works awesome for getting in tight spots. It also does a great job when I wash my motorcycle getting in between stuff you normally couldn't reach with a regular brush.

Love to hear if you do anything for the dash to prevent cracking. Thanks and keep up the good work!

Huge👍 maybe I’ll try this over the holidays🎅🏼🎄

Nice job man!!!

Unbelievable great job!!!

Pressure wash using synthetic soluble oil used in CNC machine tools, it does not take much but it coats the undercarriage with anti-rust coating that will not collect dust, that is if you use 1/8 ounce per gallon mix. it also leaves the undercarriage looking great.

Good vid, def doing this come spring

hey brother great job , i do this at least once a month , best thing you can do ...NOT INSANE !!!! i transport for a living and my truck gets bad. great video to show others how it properly done lmao it takes me almost 7 hrs wash , clay , wax , ceramic... awsome trick with the wd40 aswell will order a 12pack and do that when i get back home.

A special kind of crazy......and there’s nothing wrong with that, great video.

Great job brother.

Living in Ontario, Canada you have spray the entire vehicle down with rustproofing oil and then the rooad dirt that accumulates on top of that actually protects it. Then you wash off excess accumulation of dirt in the spring and then spray on top of whats left once it dries. So we have a layer of oily road dirt to protect the vehicle.

Maybe I should get a truck first 🤔 but it is good to learn how to clean/detail and maintain it! Fantastic work 👏

thanks for the video! sweet truck

Not only do I do this myself to my second gen but I also learned some new tips and tricks. Never thought to use WD-40. Great video! Beautiful truck too.

Nice - that thing looks pristine

That truck will live for ever because of you good job

Bro this thing is soooooo cleannnn. Wow, I need to get mine looking like this

Recently bought an 84 bronco to restore. Previous owner was a fan of mud riding plus there’s an oil leak. So this weekend, this is my goal

Great video! New subscriber here. I’m so on the fence about the 2.8 Dmax in a ZR2. I love the concept of great mpg and longevity, but I’ve heard a few horror stories about the 2.8 Dmax that scare me as a first time diesel owner.

I’m the same way with my JKU running a LT1 6.2 my jeep has 205k and looks brand new. I wheel it and run it hard but maintenance the hell out of it wd40 works good fluid film in the winter works better in the north east. Great video wish I knew about this with my 99 Chevy Silverado that rusted away

Great video. One thing I was surprised with was that you didn't remove the spare tire to clean it and around it. In the video you could see dirt on it. With how thorough you were with the rest of the cleaning, that just surprised me.

As you said, this is INSANE!

Hey Andrew. Thanks for this video. Question: Are there any parts of the undercarriage that should not be cleaned- that we should not touch? e.g. I'm thinking the brake disks (sorry, not a car expert). Sometimes I worry that the washing might harm something.

After I wash my undercarriage either on my 4Runner or my daughter’s Jeep, I use an electric leaf blower to really get that heavy water blown off. Usually does the trick. No water pooling in places.

I love your kind of crazy. But I can’t justify doing this anymore for myself. Still, amazing work and passion - keep it up

Awesome video. It helps starting with a really clean truck. How long did this take?

SERIOUSLY!!!! I loved this video! Honestly it's the 1st video I've watched from this young man's channel but his OCD, and care, and pride in his vehicle is the reason I subscribed ,which I did. I've never met or seen anybody as OCD as I am until right now! My little sister actually calls me RAINMAN (Ducks are over here Ray, I'm an excellent driver, slow in the driveway 🤣) and she has since she's been able to talk! I'm sure only people of a certain age will get that reference or understand it but that's alright. It's good to finally see someone as insane as I am! LOL! 🤣 Keep up the great work!

Your awesome ima try and commit to this to my jeep

If you guys can get to it, try to reasurch KROWN or fluid film like applicants rust protective. I have a Tundra, which has a bad history with rust. Got it Krowned for the past two year. Took it to the Toyota to get oil change and the mechanic wanted to find out what I was doing to make the bottom of my truck last so good.

on rocker panels, there are drain holes. once a year rinse thoroughly by shooting a stream directly up into those openings. can also access from the runner board mounting slots sometimes. if there are no runner board supports attached to the rockers

I love watching crazy people do this kind of stuff...awesome.

I wash my truck the same way people think I'm crazy. I live in hawaii so rust is a big issue and my truck isn't garage kept. Honestly that's why our trucks last the longest and also resale is better. Not only cleaning and making everything all shiny. We are also inspecting the vehicle for loose, worn, or broken parts also foreign objects that can cause future issues. Very good content just started watching your videos. Aloha 🤙🏽🤙🏽

You just made me a mad man. Thanks a lot!

Dude, I thought I was the only one. My vehicles last me 10+ years with 0 rust. Currently have a 2020 F250 and it’s better than mint. I actually take it a step further, I coat with fluid film and let it sit for a couple months.. the fluid film creeps into the cracks and crevices… then I clean and wipe all the fluid film off all the main surfaces and coat with WD-40! For plastics and tires 303 only!!! I’m super truck and boat OCD lol Truck always stays in climate controlled garage with dehumidifier and stays dry as much as possible. Great video! Prob the best I’ve seen in something like this. P.s. use latex gloves to keep your hands dry then put mechanics gloves on over so u don’t get all cut up. I also wear a full goretex rain suit.

great job..... wire brush spray paint too!! . Ive been the same way for years...

you make such good quality videos keep it up

In the beginning, I bought like 30 cans of surplus Rustoleum anti-rust paint. So the underside is like "Tie Die" because 30 cans go a long way. But over time, the black grease and other cans of "paint" I got covered the RustOleum. I'm so happy I did that, because after 490,000 miles I have Zero Rust, on on the "brake disks" rust shows...

I had to come back to say this. I watched this video n u mentioned steel it for frame paint I did some research n bought some....today i used it n wow it looks amazing

Great how-to, thank you. Wheels look great, do you mind telling which model they are?

You should do a video on painting the undercarriage - would be awesome to get my truck looking like yours.

Surprised I didn’t see you drop the spare. Amazing attention to detail sir. Now I want to go out and do this to mine but I’m stuck in the Ohio snow belt. Shout out to OCD!

Hands down sick man. Hands down way too sick. Way to go man. Be proud of yourself. I’ll be doing it to my 09 Silverado and use what you did. Shit is immaculate!

Honestly like you I'm a perfectionist. Here in new england I could not find an 2006 dodge 2500 5.9 without rust I had to fly out to west coast and get here I do the same cleaning method as yourself and NH undercoating is the key. People are lazy and let their investments go to crap.

Very nice I m the Exact same way with my truck

Great video 👍

Preserve your investment. Great quote. Subscribed 🤙🏼

Awesome video, you just got another subscriber. When I bought my 8 year old truck the bottom looked like yours and I was amazed and confused how to keep it that way. BTW, it would also be awesome if you could update your vid description with links to your other videos you said to go watch. I'm struggling to find some of them. Thanks again for taking the time to put together this how to!

My 32 year old 1990 first Gen cummins is clean and nice because of where it has lived but it goes in next week for a complete dry ice blast and paint. I'm hoping it turns out similar to this

Not crazy at all. Nice work! ... I do the same with my 230K Jeep which people still confuse with a brand new Jeep.

There's a reason why you have one of the nicest 3rd gens around...awesome videos, in BC here its getting cold and winters hitting hard, will be definately touching up my undercarriage after seeing this video in the spring!!

You are not crazy I have a 2022 ram 1500 limited I got last September, I lived in Ontario Canada where they salt the road here every winter what I did I when I bought the truck I painted over the factory paint on the frame and, then clear coat over it then got it rust proof from krown, I'm definitely doing a deep clean under my truck then rerustproof it when the weather gets better I don't give a crap what people think about me I love my truck and want it to last a very long time can't be driving a nice truck with a rusted out frame

I wanna buy one of your used trucks , you take good care of your stuff

Nice truck dude gotta say that u keep that thing mint 👌🏽 I wish I can do that to my trucks undercarriage but living up here in Canada where we have long winters Where they sprinkle road salt it's hard to keep it clean like yours & unfortunately most cars start to rust fast the only remedy that we can do is spray undercoating or fluid film but eventually they can wear off too

Great video

That’s impressive.

Loved it! Stay crazy

What a Great job Andrew ! I’m not as crazy I thought...😅 I do this only 2 times ! The day I bought my truck and the day I sell it again... You’re more than welcome to clean my truck if you ever come over to France...😜

Satisfying 😌

Im surprised you dont drop the spare tire, excellent work!