How to Connect Octo Varios to GHL Profilux Using 0 - 10V Control
Рет қаралды 3,352
4 жыл бұрынHere's a how-to video on connecting the Octo Varios Pumps to your GHL Profilux by using the Breakout Box. The 0-10V control allows for a lot more flexibility in controlling your DC powered return pump.
Link to the 0-10 Cable I used:
www.bulkreefsupply.com/altern...
Link to the GHL breakout box:
www.aquariumcomputer.com/usa/...
@threesons270 2 жыл бұрын
Are you still running you tank? How’s the ghl ecosystem running?
@stevecha9741 4 жыл бұрын
While using the 0-10v connection, you would still need to plug in the pump to a power socket (not necessarily a GHL power bar) correct?
@HobbySci 4 жыл бұрын
Correct you would not need a power bar
@tomengland5082 3 жыл бұрын
Hi, I'm thinking of getting a profilux very soon... I have the varios 6 plumbed straight into my uv, when you control it through the profilux can you run it at any speed? Not just the presets? I need to run the pump lower than the speed on the lowest preset... Thanks
@HobbySci 3 жыл бұрын
Yes it can run it lower than 20%. Increments on 1%. There may be a minimum required for the motor to turn though, maybe 5%
@tomengland5082 3 жыл бұрын
@@HobbySci ideal thanks! so I should be able to get 1800l/h out of the varios?
@HobbySci 3 жыл бұрын
@@tomengland5082 I’m not sure what the exact Varios 6 flow rates are. But with the 0-10v controller, you can set the pump anywhere from 0-100% in 1% increments.
@tomengland5082 3 жыл бұрын
@@HobbySci thats awesome thanks 👍
@tinavotaw4158 4 жыл бұрын
Where in the app do you go to program the pump?
@HobbySci 4 жыл бұрын
If you go to 0-10v and set it to stream group. You can control it under extras
@THTRT 4 жыл бұрын
What sort of sand are you using ?
@HobbySci 4 жыл бұрын
Aragonite special grade
Poly Holy Yow Spanish
Рет қаралды 29 МЛН
Project Time with Preston
Рет қаралды 22 М.
đồ câu vĩnh châu
Рет қаралды 8 МЛН