Fairly good video, but as with most, one very important detail was missed. The minimum flame for the burners was missed. When the burner is turned to low, it will actually only go to medium as it is still set for Natural gas. To finish the job, at each burner, turn it to low, then pull each burner knob off the shaft. There is a very small screw inside the shaft, slowly turn it in till a small minimum flame is reached, the flame is still consistent all the way around. To check it, turn the flame to high, quickly turn it to low and the flame will quickly drop in size but not go out. If it does then increase the minimum flame size slightly. Do the rest of the burners and you will have a full range of flame size, instead of just high to medium. If the stove is near open windows or excessive draft from a range hood, the minimum flame may also need to be increased slightly. If your range has a dual burner, the second screw will be near the first. Read the instruction book in this instance. Enjoy the nice small simmer setting when done.

Thank you very much! Followed your video and successfully converted our gas range oven! In Hawaii we don't have natural gas....don't understand why they don't automatically convert it here! You saved us money! Mahalo! & Aloha!

Thanks so much....I was a little nervous but your video made it easy and I saved a $175.00 fee. Woohoo!

Thank you! This video saved me waiting 2-3 weeks for an expensive service call on a brand new Range. Well done.

Outstanding video! I cannot thank you enough for putting this out. You saved me an expensive service call on a brand new stove.

Once again , another video which is given in plain english! I like the fact that nothing in your videos is ever rushed! I'm putting in a new kitchen and our antique Moffat stove will be replaced by a new gas range....problem is they usually come in natural gas with the LP conversion kit thrown in! You probably just saved me $100 for a tech to come in for half an hour to change it over! Cheers

Excellent video. You saved me a service call to get my new stove up and running.

just got a job in the morning to install a stove , now am ready to get to work. this video is going to create jobs for me to support my family thanks amillion .

Thank you so much for making this video. The tip to prop up the range to get to the regulator is awesome. I managed to do this change over entirely by myself with your video. Super helpful.

The house has come SO far from this video! So fun to look back! Thanks for producing such useful content, we used this video tonight to switch out the orifices on our new stove!

Thanks man perfect video! The manual is so small cant read or see S**t. Also top tip here do the Broiler top first in case you drop a screw that will fall into the abyss of the lower bake shields. Thanks!

The electrical tape on the end of socket worked like a charm.

@Benjamin Sahlstrom Your an absolute GENIUS!!! Thank you for all you do in your continuous help to educate us or rather just me. 😂😂

This is the first one that has changed oven orifice. My stove had top orfices but not oven. Some videos had just adjust oven burners.

Thank you so much for this video. The information and details are not covered in the instruction manual and it gave us hope that we could get our new stove installed. When we bought the stove, we were told there was a propane conversion kit included. We haven't bought a new stove in over 30 years and we were expecting hoses and connectors--ha! ha! Instead there are about 8 or 9 little orifices to be installed by getting in awkward positions. I called Lowe's to find out where the conversion kit was and was told the hoses, etc., were in the oven. Nowhere in the instructions or online is there a listing of the items in the conversion kit. Anyway, this was a very frustrating experience until we found your video. After installing all the orifices, the stabilizer, etc., we found that the burner flame was too high. To fix this you have to disconnect the gas and electricity, stand on your head, take the cap off the regulator, put a small tool inside and tweak until the flame is at the right level. At this point, we decided to call a service person, who could come in a week. It does look pretty in our kitchen, though.........

Gas co just told me $225 to do this. I think I will have to do it myself.

Thank you Benjamin. We are expecting our Kitchen Aid Dual-Duel range around August 1st and your video has given us the confidence to convert it ourselves (with extreme care). Thanks again!

Love the tape on the driver idea! Thanks for the information

Good step by step instructions for the stove....got it done!

I dropped a couple of the stovetop ignitors while I was removing them. How do I lift up the rangetop to get them out? It won't matter, but I know that they are in there. ;) GREAT video! Not sure why ANYONE would give it a thumbs down. Jealous maybe? Thanks so much!

Thanks to you the new is stove working great! I’m looking forward to baking some dough instead of spending dough to have change done! 😃❤️😃❤️😃

Really helps to get the job done, thanks

Thanks for the tape tip

Great job. Thanks for showing how it's done.

Very helpful video. We found it to be the best one we could find. Thank you!

I tell u what Benjamin, this vid was very detailed and simple ... now I jus bought a Samsung gas range for outside kitchen so am hoping I do this right ..🤞🤞🤞👍😂 ... jus subbed too

Highly recommend! !!!

Purchased a Whirlpool range at the beginning of December, and it is missing the 100 orifice for the broiler. You are the only one that I have found that even shows it. I can not find a place to order it any where.

perfect

This is the first of yr videos I have watch really really helpful thank You! peace & Love from UK Sheffield (the Steel City)

A very good video, except I found it too late for my new stove. Keep up the good work..........

Talking about the oven orifice. And here's the LP1! Where did it come from where did you get it?

Good job...That is a lot of work..!

Very helpful video. Best conversion video out there. You're a lifesaver!

Good job young man! Clear presentation, well spoken.... refreshing!

very detail and informative. Really appreciated it

Good confidence building video... Thanks

Thanks!

worked for me. !

U re a Champion! Thanks x the tutorial.

Your'e a pretty handy fella to have around for such a young pup. Great video's appreciate the time you take to do them on such a wide range of topics. All the best in 2018

Thank you for the detailed instructions!

Excellent video. Thank you my friend.

This video was so usefull. Thank you for this.

Thanks again Ben! My subscription to your channel has helped me with many projects. I appreciate your patient and methodical approach to home repairs and upgrades which might require the hiring of a professional ($$$), without your skilled instruction. After watching this video, I had my range converted from NG to LPG in about an hour.

Muchas gracias

Bruh just set it on its back lol 😆 from one Benjamin to another 😇😘

Great vid thank you 😁😁😁👍👍👍

Thank you so much now our food no longer taste like gas

Nice video thanks a lot 🙏🏻

Well done friend. This was a great help! 👍

Hank hill approves this video

Thanks very helpful

Awesome, thx..

Very helpful video. Thank you for posting this!

Good video man straight to the point i didn't know id have to do so much. But glad i watched your vid. Thanks for the lesson.

Muy bueno

Can you post which conversion kit you bought? Link would be great

Great video 👍 Thanks!

Good job brotha. Thanks

Helped us a lot!

What about the back of the stove what part do you need for it.

My man. You rock. Thank you for the great video!

Total noob here...do you need to make sure the gas is turned off or the oven is unplugged in order to do this?

Definitely an informative video

Are the stove the same or does each manufacture different parts

What can you do if you cross thread one? How do you fix this?

great info!!! thanks

Did you move that plastic cap to the other side?

I got a Kitchenaid range gifted to me and need to convert it from propane to natural gas. I had the parts to convert it to NG but I lost them. Would I be able to use all of the burner and oven orifices from my old NG stove or are they model/brand specific?

The orifice to my flame spreader is behind the oven and is exposed. That is rather than being connected to the flame spreader by a pipe, it is just directed towards the opening of the pipe portion of the flame spreader. It hisses now. Is it a hazard?

Nice video !

Hey awesome video I did everything as told and now I just need help with the cylinder connecting Do I just get a gas pipe connector and connect normally or do I need to attach things to the cylinder

where would I buy the natural gas orifice for inside the oven? I have the same range and im trying to convert LP back to NG

Hey great video! Where did you get the conversion kit for the top burners, and broil and bake fittings?

Good information

Any idea where I can buy kit to convert back to Natural gas?

Why did you not adjust the airflow after you change the orifices? it has to be done.

Perfecto grasias

What about the rear? where the propane tank is connected.

Thanks. Do you know how to convert Henny Penny conventional oven into a propane oven?

hey could u give me advice on changing a ng to LP for a Model # JGBP35CEA 1CC Serial # VZ291360P

Hi , i have eletrolux stove model Ew30gs65gs2 and need to converter to natural gas and have erro F15 can u help me? Thanks

hello sir, i have been able to convert but the oven is very low flame, pls wht could be the problem

My new house is on utility gas. If I get a stove or a grill & it burns weakly, I may need to run this in reverse.

More light?

Same as Frigidaire?

Question Your stove has a regulator plus a regulator on the tank and 1 outside house?

How about you lay the stove on it's back?

You forgot to mention air shutters open

Does the orcas say LP or nat.

Where was the kit at I can’t find mine for the live in me

👍🏼

Is LP, liquid propane?😵

Nice job. Come over and help me with my Samsung LP conversion. I'm getting to old for this stuff.

You need better lighting dude.

😜😜😜😜

Thanks!