No video

How To Convert Amdro Boot Jump To Single Birth

  Рет қаралды 12,174

JesterBushcraft

JesterBushcraft

Күн бұрын

Пікірлер: 56
@Chris391971
@Chris391971 5 жыл бұрын
Good idea. Very useful if it’s raining or there’s loads of midges and you can climb into the drivers seat without going outside
@JesterBushcraft
@JesterBushcraft 5 жыл бұрын
Chris Waistle I think so yes, will be putting it to the test in next few days. Thank you for your comment 👍
@simon3824
@simon3824 4 жыл бұрын
Brilliant solution to the one drawback of the boot jump... not being able to drive in sleep mode. Unless I suddenly get rich and can afford a new Berlingo Xl, which does allow the extra space to leave driving seats in position, I will do this clever conversion. Thanks, great vidio... now let’s get this lockdown over, open the campsites and get to the coast! Cheers, take care, Simon. Oh and the window stores are my next Amdro purchase!
@JesterBushcraft
@JesterBushcraft 4 жыл бұрын
Thanks Simon for your kind words. It's a great mod giving you so much more flexibility...
@amandamurdoch3587
@amandamurdoch3587 4 жыл бұрын
You've solved the problem before I'd realised it was there. I'm only just learning boot jumps and hadn't realised I couldn't just jump in the front seat. Guess what I'm doing tomorrow. Huge thank you
@JesterBushcraft
@JesterBushcraft 4 жыл бұрын
Glad it was of use, good luck in your new Boot Jump adventures...
@nightwolf1592
@nightwolf1592 5 жыл бұрын
There’s no stopping your creativity in the bid for small camper van perfection 😊 Intend to do a KZfaq video ( my first video ) of my home made Berlingo camper this summer. Ordered one of your BerliGo t shirts the other day. Keep up the good work.
@JesterBushcraft
@JesterBushcraft 5 жыл бұрын
Night Wolf 🤣 I can’t help myself, I love it and it keeps my mind busy. Thank you for your support, much appreciated. If your on the Berlingo Campervan Facebook group you need to upload a photo wearing your T-shirt in front of your Berlingo 👍
@nightwolf1592
@nightwolf1592 5 жыл бұрын
JesterBushcraft I’ve just joined Facebook. Had a look but can’t get a result for that group.
@JesterBushcraft
@JesterBushcraft 5 жыл бұрын
Night Wolf try ‘Berlingo / Peugeot Partner Campers Only’ 👍
@nightwolf1592
@nightwolf1592 5 жыл бұрын
Found the Facebook group, thanks. Berlingo is in van mode at moment, collecting firewood. Once back in camper van mode will take photo of ‘Bertie’ and t shirt 😊
@JesterBushcraft
@JesterBushcraft 5 жыл бұрын
Night Wolf that’s the beauty of the removable camper 👍
@stevenwilson690
@stevenwilson690 4 жыл бұрын
Hi Mick Just found your youtube videos well done with the Berlingo mods got me thinking abut my T5 shuttle Steve
@JesterBushcraft
@JesterBushcraft 4 жыл бұрын
Seven Wilson Thanks, glad you’re enjoying the videos...👍
@lisainvicta8367
@lisainvicta8367 5 жыл бұрын
Brilliant! I’ve been thinking about getting rid of my double and buying a single, but couldn’t justify the expense. Now, if I can just find the courage to make that saw cut...
@JesterBushcraft
@JesterBushcraft 5 жыл бұрын
Glad you found it of use, be brave, get the saw out... let us know how you get on...
@thepracticalsurveyor
@thepracticalsurveyor 4 жыл бұрын
Borrow a track saw off someone and make perfect cut in a minute. Surprised Buster Jessdaft used a handsaw!
@user-ff5he5mm4o
@user-ff5he5mm4o 6 ай бұрын
That was very helpful. Would it be possible to make room for my dog and a portable toilet. I only need the single bed. Thanks
@JesterBushcraft
@JesterBushcraft 6 ай бұрын
It’s surprising what you can make fit if you put your mind to it, but just remember things need to be accessible as possible without having to move too much around… thank you for your comment 👍
@ianofsjkartwork
@ianofsjkartwork 5 жыл бұрын
Brilliant idea works really well,...thanks for sharing
@JesterBushcraft
@JesterBushcraft 5 жыл бұрын
Ian of SJKartwork you’re very welcome...
@sswindon
@sswindon 3 жыл бұрын
I love the idea of being able to park up and hop straight into bed without faffing about folding seats etc. What did you use to cut the piano hinge so neatly? Thanks
@caspervanlife8466
@caspervanlife8466 3 жыл бұрын
Just a decent hacksaw mate 👍 I’m answering this question from my new KZfaq channel in case you were wondering why 😁👍
@billyroberts2600
@billyroberts2600 5 жыл бұрын
Great idea
@JesterBushcraft
@JesterBushcraft 5 жыл бұрын
Billy Roberts Thank you for your comment...
@simonlongman4509
@simonlongman4509 5 жыл бұрын
Cool thank you very much I may have to have a look at doing mine because it will be excellent for my fishing trips🎣🎣🎣🎣🎣👍👍👍👍
@JesterBushcraft
@JesterBushcraft 5 жыл бұрын
Simon longman your welcome, any questions just ask...👍
@ifell3
@ifell3 5 жыл бұрын
Looks cozy!!
@JesterBushcraft
@JesterBushcraft 5 жыл бұрын
ifell3 thank you...👍
@CleonaPattersoneFluentEnglish
@CleonaPattersoneFluentEnglish 3 жыл бұрын
Thanks for sharing🙂
@johnbrownboots9884
@johnbrownboots9884 4 жыл бұрын
Your full of great ideas. Whats your job, a development engineer ?
@JesterBushcraft
@JesterBushcraft 4 жыл бұрын
Ha ha, No, but thank you for your comment...
@davidp6340
@davidp6340 4 жыл бұрын
A berth is a bed, usually stacked like bunk beds, on a train or a ship
@JesterBushcraft
@JesterBushcraft 4 жыл бұрын
David P I stand (or sleep) corrected...👍
@crazybearkaiser7084
@crazybearkaiser7084 5 жыл бұрын
Excellent mod. Handy as you can set up before you leave home and not have to faff about when you arrive somewhere. I had thought of the same thing for mine but didn't have the balls to cut it. Is it still stable in twin mode or would you need some kind of bracket to join the 2 pieces together?
@JesterBushcraft
@JesterBushcraft 5 жыл бұрын
Crazybear Kaiser I didn’t even bother with the Velcro straps, as it’s easy enough to open up/close... it’s seems stable enough to me and once cushions are in place, spreads the load... proof of the pudding and all that... watch this space. Thanks for your comment...
@crazybearkaiser7084
@crazybearkaiser7084 5 жыл бұрын
@@JesterBushcraft Thanks, I will watch this space. I would say that any stability issues should be easily sorted with Velcro straps. Must commend you on having the nerve to cut it in the first place. Thanks again, Ian.
@bechilled3875
@bechilled3875 8 ай бұрын
Just got my 1st berlingo 2011 xtr, managed get 2nd hand Amdro the same week. Not played with yet due to weather. Will be doing this mod, as if I'm with wife double is excellent, but if on own large golden retriever will be with me, like idea of doubling up cushions so he is not ruining things. Can I ask, did you find a need to strap the main sections together when both in sofa mode, or were they solid once cut ?. And now years on, anything you would done instead ? Thank you again, and off to check out your back log vids.
@JesterBushcraft
@JesterBushcraft 7 ай бұрын
Firstly thank you for your comment, much appreciated… you’ve made a great choice in base vehicle and the boot jump is a great piece of kit, which I got many years enjoyment out of (I now have a T5 camper… CasperVanLife ). I did use a strap, yes, to hold the 2 sections together, but not necessary. The side window storage units are a great addition for additional storage. My only advice would be, don’t be afraid of modifying the boot jump to suit your needs, have a specific place for every item of kit and make sure you have what you need for nightime, before converting to sleep mode 👍
@davidp6340
@davidp6340 4 жыл бұрын
I think it is berth not birth unless somebody is having a baby .
@gillnicholls9665
@gillnicholls9665 Жыл бұрын
Can you use original boot jump as 2 singles by taking table out?
@simonlongman4509
@simonlongman4509 5 жыл бұрын
What kind of saw did you use to cut it into 2 and with it being in two halves where the support legs are at the back of the seats what kind of strain is put on them. Did you use a sander to bevel all the edges and did you finish all the raw edges with linseed oil🤔🤔🤔🤔👍👍👍👍
@JesterBushcraft
@JesterBushcraft 5 жыл бұрын
Simon longman I used a good (sharp) hand saw, a sander and have yet to buy and apply the boiled linseed oil... with the cushions in situ, the strain applied is much as it was before. I would only be resting my shoulders and head in this section, so not a lot of weight. I wouldn’t put any unnecessary pressure on these sections (I.e applying my whole weight)...
@simonlongman4509
@simonlongman4509 5 жыл бұрын
Hi like the mod and been thinking of doing this to mine but would like to see one being done before I attempt it.
@JesterBushcraft
@JesterBushcraft 5 жыл бұрын
Simon longman what in particular would you like “seeing done”...? I’ll try to help where I can 👍
@freddiefare
@freddiefare 3 жыл бұрын
Great job! I'm considering an amdro boot jump for myself and was wondering this very thing. I'm not too handy with saw. I wonder if the modifications could be made at source?
@JesterBushcraft
@JesterBushcraft 3 жыл бұрын
Im sure they would accommodate this at Amdro, best to get in touch with them... Thank you for your comment...
@jonquilbennett8411
@jonquilbennett8411 5 жыл бұрын
Hello Jester Bushcraft . . . great videos, thank you. Have you ever done a video on how to convert the front seats (driver and passenger) of a Citroen Berlingo pre 2008 so that the backs fold far enough forward to allow the Amdro Boot Jump to lie flat when in bed mode? The problem with these early models is that the angle of of the backs, which are adjusted using a winder mechanism on the side of the seat, takes the back to an upright position, but no further forward (i.e. to a more acute angle). Any suggestions or photos greatly appreciated!
@JesterBushcraft
@JesterBushcraft 5 жыл бұрын
Jonquil Bennett Thank you for your comment. I’ve never needed to convert the front seats, so never done a video I’m afraid. Hopefully someone else on here may have...
@jonquilbennett8411
@jonquilbennett8411 5 жыл бұрын
@@JesterBushcraft I got my answer in the end, but thanks for replying.
@JesterBushcraft
@JesterBushcraft 5 жыл бұрын
Jonquil Bennett there’s always someone with the answer...👍
@stropskoj
@stropskoj 3 жыл бұрын
Jonquil Bennett where did you find the answer please thanks 😊
@jonquilbennett8411
@jonquilbennett8411 3 жыл бұрын
@@stropskoj Amdro themselves sent me a paper on how to do it. It involves a hacksaw and a metal file, and it all worked very well. You could try emailing them.
@merlin1star
@merlin1star 4 жыл бұрын
If you'd have sawn it the other way up you wouldn't of chipped the fascia just saying
@JesterBushcraft
@JesterBushcraft 4 жыл бұрын
merlin1star You’re quite right, lesson learnt. Thanks for the great feedback...
Camping boot box by Campal Campervan Conversions Ltd (for Berlingo)
15:32
Campal Campervan Conversions
Рет қаралды 11 М.
Which One for your Micro Camper?
11:30
The-Other-Windsors
Рет қаралды 10 М.
나랑 아빠가 아이스크림 먹을 때
00:15
진영민yeongmin
Рет қаралды 3,1 МЛН
managed to catch #tiktok
00:16
Анастасия Тарасова
Рет қаралды 47 МЛН
PEDRO PEDRO INSIDEOUT
00:10
MOOMOO STUDIO [무무 스튜디오]
Рет қаралды 18 МЛН
Amdro Boot Jump Water Container And Tap Modification
6:22
JesterBushcraft
Рет қаралды 3,9 М.
DIY Thermal Blackout Blinds For Your Campervan
11:50
JesterBushcraft
Рет қаралды 35 М.
ASPA | Camping Box DIY | Diseño de mueble para furgoneta
11:42
Bianca Castafiore
Рет қаралды 1,2 МЛН
Ultimate Stealth Camper Van Tour | Nissan NV200 Self-Converted Build Walkthrough
15:15
099 - My Berlingo Boot Camper Pod - How It Works
6:42
Nina The Ambulance Camper & Other Stories
Рет қаралды 141 М.
amdro boot jump showcase
8:11
amdro alternative campervans
Рет қаралды 590 М.
amdro window store for Berlingo / Partner 2009-2018 camper car
9:32
amdro alternative campervans
Рет қаралды 41 М.
amdro boot jump 2020 cooker drawer
2:20
amdro alternative campervans
Рет қаралды 10 М.
나랑 아빠가 아이스크림 먹을 때
00:15
진영민yeongmin
Рет қаралды 3,1 МЛН